Abbasi, Marjan Effect of Melt Spinning Variables on the Structural Changes of Recycled and Bottle Grade Filament Yarn PET [Volume 6, Issue 2, 2018, Pages 67-75]
Abbasi Teshnizi, Mohadeseh Investigation of the effect of polyamidoamine on the final properties of polyvinyl alcohol-based hydrogels [Volume 12, Issue 2, 2024]
Abdolmaleki, Amir Innovative Method for Demineralization of Cellulosic Substrates via Morpholinium Hydrogen Sulfate [Volume 10, Issue 3, 2022, Pages 3-12]
Abdolmaleki, Sahar Estimation on the 3D porosity of plain weft knitted fabric under wale extension [Volume 2, Issue 2, 2014, Pages 25-31]
Adeli, Behrang Investigation of the Possibility of Generating Electric Current from PVDF/PU Polymer Alloy Layer under Cyclic Tensile Loading [Volume 10, Issue 4, 2022, Pages 21-32]
Aflatounian, Ali Behavior Analysis of the Nonwoven Needle-Punched Polyester Fabrics Due to Compression Loading [Volume 7, Issue 1, 2019, Pages 33-43]
Afrashi, Mehran Comparison of the Anti-Fungal Effect of Electro-Spinning Drug-Loaded Nano-Fibers and Pad Dry Drug-Loaded Fabrics [Volume 8, Issue 1, 2020, Pages 37-42]
Aghajanian, Shara Effective Factors in Changing the Buying Behavior of Iranian Apparel Consumers [Volume 8, Issue 1, 2020, Pages 65-74]
Aghanouri, Abolfazl Performances of classic and weighted versions of some selected methods in estimation of spectral data from camera responses [Volume 1, Issue 1, 2013, Pages 9-18]
Aharanwa, Bibian C. Transport Characteristics of Benzene through Palm Mesocarp Fibre/Low Density Polyethylene Composites [Volume 6, Issue 2, 2018, Pages 83-95]
Ahmadi, Mohammad Saleh Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method [Volume 11, Issue 3, 2023, Pages 19-27]
Ahmadi, Mohammad Saleh Experimental and analytical study on tensile strength of short-fiber-reinforced adobe (SFRA) [Volume 11, Issue 3, 2023, Pages 29-38]
Ahmadi, Zahra Evaluation of Color Sensitivity to Dyeing Parameters in Natural Dyeing with Anthocyanin [Volume 5, Issue 2, 2017, Pages 43-48]
Ahmadi, Zahra Effectual parameters in natural dyeing: Dyeing of woolen yarns by madder [Volume 1, Issue 2, 2013, Pages 65-69]
Ahmadi-Vamakani, Soheila Study on Bending Damage of Intra-Ply Basalt/Nylon Hybrid Composites [Volume 6, Issue 2, 2018, Pages 59-66]
Ahmed, Shaharia Influence of Cover Factor on the Physical Properties of Woven Fabrics [Volume 10, Issue 1, 2022, Pages 57-63]
Ajeli, Saeed Investigation into the Curling Intensity of Polyester/Cotton Single Jersey Weft Knitted fabric Using Finite Element Method [Volume 3, Issue 2, 2015, Pages 86-90]
Ajeli, Saeed Strength analysis of seamless double layered fabric using FEM [Volume 2, Issue 1, 2014, Pages 17-20]
Ajeli, Saeed Geometrically poisson's ratio of the polyester double-bar warp-knitted structures on the jamming point [Volume 2, Issue 1, 2014, Pages 26-30]
Ajeli, Saeed Investigation into the geometrical loop effect on tensile behavior of single bar warp-knitted fabric using finite element method [Volume 1, Issue 1, 2013, Pages 31-35]
Ajeli, Saeed Fuzzy VIKOR Optimization for Designing High Performance Hydroxyapatite/Polycaprolactone Scaffolds for Hard Tissue Engineering [Volume 8, Issue 1, 2020, Pages 17-36]
Akbari, Somaye Thermal Analysis of Acrylonitrile/Acrylic Acid Copolymer Dendrigrafted with Citric Acid [Volume 4, Issue 1, 2015, Pages 27-36]
Akbari, Somaye Design of Dye Adsorption by Amine Terminated Dendritic Functionalized Halloysite Nanotubes Using Response Surface Methodology (RSM) [Volume 7, Issue 2, 2019, Pages 25-36]
Akbari, Somaye Effect of APTES-Halloysite Nanotubes on the Release Characteristic of Cellulose Acetate/Curcumin Film [Volume 10, Issue 3, 2022, Pages 23-34]
Akbari, Somaye Investigation of the effect of polyamidoamine on the final properties of polyvinyl alcohol-based hydrogels [Volume 12, Issue 2, 2024]
Akbari, Somaye Synergistic Modification of Cotton Fabric with Polyamidoamine Dendrimer and Cationic Gemini Surfactant for Enhanced Functional Performance [Volume 12, Issue 3, 2024]
Akbari, Somayeh Chlorine Resistance of Thin Film Composite Polyamide Membrane Functionalized by Poly(amidoamine) Dendrimer [Volume 10, Issue 2, 2022, Pages 3-14]
Akbari-Adergani, Behrouz Adsorption Properties of Thiol-Functionalized Silica Nanoparticles Prepared for Application in Poly(ether sulfone) Nanocomposite Membranes [Volume 5, Issue 1, 2017, Pages 37-47]
Akbarpour, Hamid Investigation of the Effects of Graphene Oxide Nanoparticles and Multi-Wall Carbon Nanotubes on Conductivity and Surface Morphology of Polyester-Viscose Fabric [Volume 7, Issue 2, 2019, Pages 13-24]
Akbarzadeh, Saleh Effects of Fibrous Layer Structure on Tensile Behavior and Fracture Toughness of E-Glass/Epoxy Composites: A Comparison Between Angle Plied and Woven Layers [Volume 12, Issue 1, 2024]
Akhbari, Mehdi Edgewise Compression Behavior of Three-Dimensional Integrated Woven Sandwich Composite Panels [Volume 8, Issue 2, 2020, Pages 53-63]
Akhbari, Mehdi Experimental Study on the Bending Behavior of 3D Woven Glass Fiber Sandwich Composite Panels [Volume 9, Issue 2, 2021, Pages 3-14]
Akter, Shilpi The Consequences of Temperature on the Shrinkage Properties of Cotton Spandex Woven Fabric [Volume 7, Issue 1, 2019, Pages 25-29]
Akter, Shilpi Influence of Cover Factor on the Physical Properties of Woven Fabrics [Volume 10, Issue 1, 2022, Pages 57-63]
Alamdar Yazdi, Aliasghar Evaluation of the fabric formability by concentrated loading method [Volume 2, Issue 2, 2014, Pages 16-19]
Alamdar Yazdi, Aliasghar Investigation and Modeling the Effect of Different Filler Materials on the Sound Absorption Properties of Double Base Persian Rugs [Volume 10, Issue 2, 2022, Pages 65-77]
Alamdar Yazdi, Aliasghar A Review on the Compression Properties and Feet Feeling Comfort of Hand-Knotted Carpet [Volume 10, Issue 4, 2022, Pages 75-101]
Aleman, Carlos Influence of Dopant Type on the Color Gamut of a Polypyrrole Electrochromic Layer [Volume 10, Issue 4, 2022, Pages 33-44]
Ali Daee, Amoon Effect of Apparel In-store Merchandise Displays in Men’s Stores on Customer Behavior: A Case Study of Tehran City [Volume 9, Issue 2, 2021, Pages 27-42]
Alihosseini, Farzaneh Comparison of the Anti-Fungal Effect of Electro-Spinning Drug-Loaded Nano-Fibers and Pad Dry Drug-Loaded Fabrics [Volume 8, Issue 1, 2020, Pages 37-42]
Alirezazadeh, Azam Effects of Fibrous Layer Structure on Tensile Behavior and Fracture Toughness of E-Glass/Epoxy Composites: A Comparison Between Angle Plied and Woven Layers [Volume 12, Issue 1, 2024]
Amani Tehrani, Mohammad DDES: Dyeing diagnostic expert system for the textile coloration [Volume 2, Issue 1, 2014, Pages 11-16]
Amani Tehrani, Mohammad Multi-dimensional Analytical Base Method for Evaluating Camouflage Patterns [Volume 9, Issue 3, 2021, Pages 21-28]
Amani-Tehrani, Mohammad Experimental study of the of the thermo-regulating property of clothing system contained different melting point microencapsulated PCMs [Volume 3, Issue 1, 2015, Pages 11-15]
Amani-Tehrani, Mohammad Enhancement of composite performance by hollow polyester fibers [Volume 2, Issue 2, 2014, Pages 5-10]
Amani-Tehrani, Mohammad Comprehensive Comparison Between Mechanical Properties of Nanofiber Matrix and Single Nanofibers [Volume 7, Issue 2, 2019, Pages 37-46]
Amirabedi, Parya Experimental design applied to fabrication of PSF membranes via NIP's method Part2:Influential parameters on pure water permeability and selection criteria for optimum membrane in MF process [Volume 2, Issue 1, 2014, Pages 31-37]
Amirabedi, Parya Experimental design applied to fabrication of PSf membranes via NIPS method Part1: Influential parameters on membrane porosity and mechanical strength [Volume 1, Issue 1, 2013, Pages 24-30]
Amiri, sahar Antibacterial properties of PCL-based nanofibers loaded with ZnO nanoparticles synthesized via sol-gel method [Volume 12, Issue 3, 2024]
Amiri, Sanam Antibacterial properties of PCL-based nanofibers loaded with ZnO nanoparticles synthesized via sol-gel method [Volume 12, Issue 3, 2024]
Anyanwu, Placid I. Transport Characteristics of Benzene through Palm Mesocarp Fibre/Low Density Polyethylene Composites [Volume 6, Issue 2, 2018, Pages 83-95]
Arami, Mokhtar Design of Dye Adsorption by Amine Terminated Dendritic Functionalized Halloysite Nanotubes Using Response Surface Methodology (RSM) [Volume 7, Issue 2, 2019, Pages 25-36]
Ardekani, Touba Investigation and Modeling the Effect of Different Filler Materials on the Sound Absorption Properties of Double Base Persian Rugs [Volume 10, Issue 2, 2022, Pages 65-77]
Arianpour, Mehrdad Theoretical Study on the Poisson’s Ratio of Tubular Braid’s Structure Considering Different Structural Deformation Regimes [Volume 12, Issue 3, 2024]
Asadi, Fateme Analysis the diffusion process for polymer solution using FTIR-ART technique: special considerations [Volume 1, Issue 1, 2013, Pages 1-8]
Asadi Fard, Pegah Chlorine Resistance of Thin Film Composite Polyamide Membrane Functionalized by Poly(amidoamine) Dendrimer [Volume 10, Issue 2, 2022, Pages 3-14]
Asayesh, Azita Effect of Fabric Structure on the Tensile Stress Relaxation of Net Warp Knitted Fabrics [Volume 8, Issue 2, 2020, Pages 65-73]
Asayesh, Azita Comparison of structural specifications and elastic properties of Iranian medical bandages [Volume 10, Issue 4, 2022, Pages 103-115]
Asayesh, Azita Effect of Number and Position of Tuck Stitches in the Pattern Repeat on the Quality of Rib Weft-Knitted Fabrics from the Point of Comfort [Volume 11, Issue 3, 2023, Pages 39-48]
Asayesh, Azita Role of Geogrid’s Structure on the California Bearing Ratio of the Reinforced Soil [Volume 12, Issue 1, 2024]
Asgharian Jeddi, Ali Asghar Analyzing the Tensile Behavior of Warp-Knitted Fabric Reinforced Composites Part I: Modeling the Geometry of Reinforcement [Volume 4, Issue 2, 2016, Pages 68-74]
Asgharian Jeddi, Ali Asghar Damage Detection of Carbon Fiber-reinforced Concrete Under Bending Test [Volume 6, Issue 1, 2018, Pages 39-45]
Asgharian Jeddi, Ali Asghar Prediction of Relaxed Woven Fabric Geometry Using Energy Method [Volume 6, Issue 2, 2018, Pages 107-115]
Asgharian Jeddi, Ali Asghar Estimation on the 3D porosity of plain weft knitted fabric under wale extension [Volume 2, Issue 2, 2014, Pages 25-31]
Asgharian Jeddi, Ali Asghar Geometrically poisson's ratio of the polyester double-bar warp-knitted structures on the jamming point [Volume 2, Issue 1, 2014, Pages 26-30]
Asgharian Jeddi, Ali Asghar A novel approach in geometrical-mechanical analysis of plain woven fabrics; Initial load-extension behavior [Volume 2, Issue 1, 2014, Pages 38-46]
Asgharian Jeddi, Ali Asghar Characterization of fabric tensile loading curve in nonlinear region related to their structure; Part1: woven fabric [Volume 1, Issue 2, 2013, Pages 53-59]
Asgharian Jeddi, Ali Asghar Investigation of fatigue behavior of polyester filament woven fabrics under cyclic loading [Volume 1, Issue 1, 2013, Pages 43-52]
Asgharian Jeddi, Ali Asghar Analyzing the Tensile Behavior of Warp-Knitted Fabric-Reinforced Composites. Part II. Modeling the Tensile Modulus of Composite [Volume 7, Issue 1, 2019, Pages 53-60]
Asgharian Jeddi, Ali Asghar Role of Fabric Structure on the Second Tensile Elastic Modulus of Net Warp-Knitted Fabrics [Volume 9, Issue 3, 2021, Pages 29-36]
Asgharian Jeddi, Ali Asghar Investigation of the Possibility of Generating Electric Current from PVDF/PU Polymer Alloy Layer under Cyclic Tensile Loading [Volume 10, Issue 4, 2022, Pages 21-32]
Asgharian Jeddi, Ali Asghar Straight-Line Loop Models for the Basic Structures of Weft Knitted Fabric (Plain, Rib 1×1, and Interlock) [Volume 10, Issue 3, 2022, Pages 13-21]
Asgharian Jeddi, Ali Asghar Effect of the structural components of the third generation of artificial football turf on shock absorption [Volume 11, Issue 1, 2023, Pages 27-34]
Asgharian Jeddi, Ali Asghar Flexural Behavior of Concrete-Mortar Composites Reinforced with Net Spacer warp Knitted Fabrics [Volume 12, Issue 4, 2024]
Asgharian Jeddi, Ali-Asghar Reinforcing Concrete Columns with Winding Technique Using Weft Knitted Structure [Volume 9, Issue 2, 2021, Pages 15-25]
Asgharian Jeddi, Ali-Asghar Effect of Woven Fabric Structure on the Water Filtration Efficiency [Volume 10, Issue 2, 2022, Pages 64-49]
Asghariyan Jeddi, Ali Asghar Maximum Negative Poisson’s Ratio of Double-Core Helical Auxetic Yarns Under Uniaxial Loading: A Study on the Effect of Structural Parameters via Full Factorial Experimental Design Method [Volume 9, Issue 3, 2021, Pages 37-44]
Ashouri, Mohammad Hossein Analyzing the Tensile Behavior of Warp-Knitted Fabric-Reinforced Composites. Part II. Modeling the Tensile Modulus of Composite [Volume 7, Issue 1, 2019, Pages 53-60]
Askari, Gholamreza Study on morphological, structural, electrical, and electromagnetic shielding properties of carbon fabric coated with nickel and cobalt by electroplating method [Volume 12, Issue 2, 2024]
Avinc, Ozan Poly(lactic acid) (PLA) Nanofibers for Bone Tissue Engineering [Volume 7, Issue 2, 2019, Pages 47-64]
Awol, Abdulkader Mohammed Characterizing Physicochemical Properties of Enset Starch [Volume 8, Issue 1, 2020, Pages 43-52]
Azubuike, Lilian C. Transport Characteristics of Benzene through Palm Mesocarp Fibre/Low Density Polyethylene Composites [Volume 6, Issue 2, 2018, Pages 83-95]
B
Babaei, Vahid Performances of classic and weighted versions of some selected methods in estimation of spectral data from camera responses [Volume 1, Issue 1, 2013, Pages 9-18]
Bahador Najafabadi, Mohsen Simulation of 301 lockstitch at different stitch densities for the prediction of sewing thread consumption [Volume 12, Issue 3, 2024]
Baheri, Hosnie Chitosan/nanosilver Nanofiber Composites with Enhanced Morphology and Microbiological Properties [Volume 3, Issue 2, 2015, Pages 64-70]
Bahram, Seyed Hajir Chitosan/nanosilver Nanofiber Composites with Enhanced Morphology and Microbiological Properties [Volume 3, Issue 2, 2015, Pages 64-70]
Bahrami, Farzam Preparation, characterization, and antibacterial properties of PVA/gelatin/ sodium alginate/ silver nanofibers [Volume 13, Issue 1, 2025]
Bahrami, Seyed Hajir Antibacterial properties of PCL-based nanofibers loaded with ZnO nanoparticles synthesized via sol-gel method [Volume 12, Issue 3, 2024]
Bahrami, Seyed Hajir Effect of wet spinning parameters of Acrylic copolymers in DMF- H2O on the physical and mechanical properties of fibers obtained [Volume 12, Issue 4, 2024]
Bahrami, Seyed Hajir Encapsulation of Zeolite/clindamycin drug into PXDDA/PVA nanofibers to investigate drug delivery [Volume 12, Issue 3, 2024]
Bahrami1, S. Hajir Polyethersulfone/Polyvinyl Alcohol-Zeolite Conjugate Electrospinning for Biomedical Applications [Volume 10, Issue 2, 2022, Pages 47-31]
Barakzehi, Marjan Electrically and Electrochemically Active Composite Based on Polyester/Reduced Graphene Oxide/Polypyrrole with Remarkable Washing Durability [Volume 8, Issue 2, 2020, Pages 15-22]
Bashari, Azadeh Advances in Research and Applications of Smart Hydrogels Part I: Preparation Methods and Classification [Volume 6, Issue 2, 2018, Pages 97-105]
Bayat, Maryam Influence of Dopant Type on the Color Gamut of a Polypyrrole Electrochromic Layer [Volume 10, Issue 4, 2022, Pages 33-44]
Behrouzi, Zeinab Theoretical and Experimental Investigation into the Adhesion between Fiber-Reinforced Bitumen and Aggregates by Using Pull-out Method [Volume 5, Issue 1, 2017, Pages 17-24]
Bidoki, Seyed Mansour Inkjet-Fabricated Capacitors on Paper and Textile Fabrics [Volume 7, Issue 1, 2019, Pages 45-52]
Borhani, Sedigheh Removal of Reactive Dyes from Wastewater using Cyclodextrin Functionalized Polyacrylonitrile Nanofibrous Membranes [Volume 4, Issue 1, 2015, Pages 45-52]
Borhani, Sedigheh Introducing a Method for Evaluating Fabric Performance against Human Body Thermal Radiation [Volume 12, Issue 1, 2024]
C
Chachi, Jalal Two Robust Fuzzy Regression Models and Their Applications in Predicting Imperfections of Cotton Yarn [Volume 4, Issue 2, 2016, Pages 60-68]
D
Dabirian, Farzad Enhancing Yarn Coverage with Electrospun Polyacrylonitrile Nanofibers via the Pin Spinning Method: An Investigation of Influencing Parameters [Volume 11, Issue 4, 2023, Pages 54-63]
Dabirian, Hadi Prediction of Relaxed Woven Fabric Geometry Using Energy Method [Volume 6, Issue 2, 2018, Pages 107-115]
Dabiryan, Hadi Analyzing the Tensile Behavior of Warp-Knitted Fabric Reinforced Composites Part I: Modeling the Geometry of Reinforcement [Volume 4, Issue 2, 2016, Pages 68-74]
Dabiryan, Hadi Analyzing the Tensile Behavior of Warp-Knitted Fabric-Reinforced Composites. Part II. Modeling the Tensile Modulus of Composite [Volume 7, Issue 1, 2019, Pages 53-60]
Dabiryan, Hadi Role of Fabric Structure on the Second Tensile Elastic Modulus of Net Warp-Knitted Fabrics [Volume 9, Issue 3, 2021, Pages 29-36]
Dabiryan, Hadi Maximum Negative Poisson’s Ratio of Double-Core Helical Auxetic Yarns Under Uniaxial Loading: A Study on the Effect of Structural Parameters via Full Factorial Experimental Design Method [Volume 9, Issue 3, 2021, Pages 37-44]
Dabiryan, Hadi Straight-Line Loop Models for the Basic Structures of Weft Knitted Fabric (Plain, Rib 1×1, and Interlock) [Volume 10, Issue 3, 2022, Pages 13-21]
Dabiryan, Hadi New Approach to characterize low-velocity impact behavior of sandwich-structured composite reinforced with weft-knitted spacer fabric [Volume 10, Issue 3, 2022, Pages 35-41]
Dabiryan, Hadi Modeling the geometry and simulating the low-velocity impact behavior of foam-based composite reinforced with warp-knitted spacer fabric [Volume 11, Issue 1, 2023, Pages 43-55]
Dabiryan, Hadi Experimental study on the effect of braiding angle on the fracture behavior of 2D braided composite cylinders [Volume 11, Issue 3, 2023, Pages 11-17]
Dabiryan, Hadi Investigation of The effect of E-glass/carbon hybridization on the buckling behavior of woven fabric reinforced composite laminates [Volume 12, Issue 1, 2024]
Dabiryan, Hadi Theoretical Study on the Poisson’s Ratio of Tubular Braid’s Structure Considering Different Structural Deformation Regimes [Volume 12, Issue 3, 2024]
Dabiryan, Hadi Flexural Behavior of Concrete-Mortar Composites Reinforced with Net Spacer warp Knitted Fabrics [Volume 12, Issue 4, 2024]
Dadashian, Fatemeh Nanocomposite film of recycled silk powder and polypropylene [Volume 2, Issue 2, 2014, Pages 20-24]
Dadashian, Fatemeh Reinforcement of Cement Mortar with Waste Cotton Fluff Fiber [Volume 11, Issue 1, 2023, Pages 35-41]
Dadashian, Fatemeh Straightforward and highly-efficient feather keratin extraction by systematic optimization of sodium sulfide treatment process [Volume 11, Issue 1, 2023, Pages 57-67]
Daneshi, Pedram A Review on Centrifugal and Electro-Centrifugal Spinning as New Methods of Nanofibers Fabrication [Volume 10, Issue 1, 2022, Pages 41-55]
Daneshvar, Elahe Multi-dimensional Analytical Base Method for Evaluating Camouflage Patterns [Volume 9, Issue 3, 2021, Pages 21-28]
Davodi Roknabadi, Abolfazl Analyzing the Structure of Pattern and Color of Shirting Fabrics and Predicting their Production and Prioritizing the Factors Affecting their Buying [Volume 5, Issue 2, 2017, Pages 29-36]
Dehghan, Maliheh Development of Resizing Software for Paper Patterns [Volume 9, Issue 2, 2021, Pages 80-71]
Dehghan, Neda Measuring the Diameter of Nanofibers Extracted from Polyblend Fibers Using FCM Clustering Method [Volume 4, Issue 2, 2016, Pages 83-91]
Dehghan, Parvin Comparison of the Anti-Fungal Effect of Electro-Spinning Drug-Loaded Nano-Fibers and Pad Dry Drug-Loaded Fabrics [Volume 8, Issue 1, 2020, Pages 37-42]
Dehghan-Manshadi, Najmeh Applying Fuzzy Logic Model for Bending Rigidity Evaluation of Woven Fabrics [Volume 7, Issue 1, 2019, Pages 61-68]
Dinari, Mohammad Influence of Dopant Type on the Color Gamut of a Polypyrrole Electrochromic Layer [Volume 10, Issue 4, 2022, Pages 33-44]
Dodankeh, Amir Hossein Modeling the geometry and simulating the low-velocity impact behavior of foam-based composite reinforced with warp-knitted spacer fabric [Volume 11, Issue 1, 2023, Pages 43-55]
E
Ebrahimi, Arega Effective Factors in Changing the Buying Behavior of Iranian Apparel Consumers [Volume 8, Issue 1, 2020, Pages 65-74]
Ebrahimi, Kazhal Synthesis of Graphene/Zinc Stannate Nanocomposite on Cotton Fabric to Obtain Multi-Functional Properties [Volume 10, Issue 4, 2022, Pages 45-59]
Ebrahimi, Saeed Optimization of the thread take-up lever mechanism in lockstitch sewing machine using the imperialistic competitive algorithm [Volume 3, Issue 1, 2015, Pages 16-23]
Egbujo, Wisdom O. Transport Characteristics of Benzene through Palm Mesocarp Fibre/Low Density Polyethylene Composites [Volume 6, Issue 2, 2018, Pages 83-95]
Ehsani, Morteza Biological Applications of Double Nanofibers based on Silk Fibroin [Volume 11, Issue 4, 2023, Pages 31-42]
Ekbia, Yasaman The Effect of Weave Structure and Wadded Weft Yarn Fineness on the Physical Properties of Three-Layer Woven Fabrics [Volume 10, Issue 2, 2022, Pages 92-79]
Ekhtiyari, Esfandiar Behavior Analysis of the Nonwoven Needle-Punched Polyester Fabrics Due to Compression Loading [Volume 7, Issue 1, 2019, Pages 33-43]
Ekhtiyari, Esfandiar Simulation of 301 lockstitch at different stitch densities for the prediction of sewing thread consumption [Volume 12, Issue 3, 2024]
Elahidoost, Hamidreza Strength analysis of seamless double layered fabric using FEM [Volume 2, Issue 1, 2014, Pages 17-20]
Emadi, Mina A Study on ZnO Nanorod Arrays Formed on the Surface of Polyester Fabric [Volume 4, Issue 2, 2016, Pages 53-59]
Emadi, Mina An Investigation of Structural-Mechanical Properties of Spun-Bonded Non-Woven Using Computer Vision Method [Volume 7, Issue 1, 2019, Pages 3-13]
Emadi, Mina Study on Linear Density Effect on the Vibration Behavior of Textile Strings Using Video Processing [Volume 8, Issue 2, 2020, Pages 41-51]
Emadi, Mina Modeling and Optimization of Mass and Spring Based Vibration String Using Modal Analysis and Imperialist Competition Optimization Algorithm Methods [Volume 9, Issue 2, 2021, Pages 43-56]
Entezami, Ali Akbar Thermal Analysis of Acrylonitrile/Acrylic Acid Copolymer Dendrigrafted with Citric Acid [Volume 4, Issue 1, 2015, Pages 27-36]
Eskafi Anzabi, Mahdieh Synergistic Modification of Cotton Fabric with Polyamidoamine Dendrimer and Cationic Gemini Surfactant for Enhanced Functional Performance [Volume 12, Issue 3, 2024]
Eslahi, Niloufar Nanocomposite film of recycled silk powder and polypropylene [Volume 2, Issue 2, 2014, Pages 20-24]
Eslahi, Niloufar Performances of classic and weighted versions of some selected methods in estimation of spectral data from camera responses [Volume 1, Issue 1, 2013, Pages 9-18]
Estrany, Ferancesc Influence of Dopant Type on the Color Gamut of a Polypyrrole Electrochromic Layer [Volume 10, Issue 4, 2022, Pages 33-44]
Ezazshahabi, Nazanin Investigation of the Tearing Performance of Fabrics with Various Constructions, Woven from Different Yarn Spinning Systems [Volume 5, Issue 2, 2017, Pages 22-28]
Ezazshahabi, Nazanin A Review on the Poisson’s Ratio of Fabrics [Volume 8, Issue 1, 2020, Pages 53-63]
Ezazshahabi, Nazanin An Overview of Protective Gloves with Regards to Hand Performance and the Evaluation Methods [Volume 9, Issue 3, 2021, Pages 3-20]
Ezazshahabi, Nazanin The Effect of Weave Structure and Wadded Weft Yarn Fineness on the Physical Properties of Three-Layer Woven Fabrics [Volume 10, Issue 2, 2022, Pages 92-79]
F
Fakhrzad, Mohammad Bagher Designing an Anti-fragile Supply Chain in the Textile Industry under Conditions of Uncertainty Using the Fuzzy BWM and TOPSIS [Volume 11, Issue 1, 2023, Pages 3-12]
Fakouri Nav, Shohreh Flame-Retardant Cellulosic Fiber Nanocomposite Based on Aluminum Tetraborate and Aluminum Tungstate [Volume 7, Issue 2, 2019, Pages 3-12]
Fallah Moafi, Hadi Flame-Retardant Cellulosic Fiber Nanocomposite Based on Aluminum Tetraborate and Aluminum Tungstate [Volume 7, Issue 2, 2019, Pages 3-12]
Farzin, Zahra Investigating Moisture Management Property of a Bi-layer Fabric Through Nanofiber-coated PET as a Novel Sewing Thread: Vertical Wicking Test [Volume 6, Issue 1, 2018, Pages 23-30]
Fashandi, Hossein Influence of solvent/polymer interaction on miscibility of PMMA/PCL blend: thermal analysis approach [Volume 2, Issue 2, 2014, Pages 32-38]
Fasihi, Mohammad Effects of Zinc Stearate Replacement and Zinc Oxide/Zinc Stearate Ratio on Rheological Properties and Curing Characteristics of Carbon Black-Filled Rubbers [Volume 12, Issue 1, 2024]
Fattahi, Farnaz-sadat Poly(lactic acid) (PLA) Nanofibers for Bone Tissue Engineering [Volume 7, Issue 2, 2019, Pages 47-64]
Fattahi, Saeed Two Robust Fuzzy Regression Models and Their Applications in Predicting Imperfections of Cotton Yarn [Volume 4, Issue 2, 2016, Pages 60-68]
Fattahi, Saeed Behavior Analysis of the Nonwoven Needle-Punched Polyester Fabrics Due to Compression Loading [Volume 7, Issue 1, 2019, Pages 33-43]
Fattahi, Saeed A model for Fabric Compressibility and Compressed Fabric Cover Factor Using Response Surface Metho [Volume 10, Issue 3, 2022, Pages 43-53]
Fattahi, Saeed Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method [Volume 11, Issue 3, 2023, Pages 19-27]
Fattahi, Saeed Experimental and analytical study on tensile strength of short-fiber-reinforced adobe (SFRA) [Volume 11, Issue 3, 2023, Pages 29-38]
Fattahi, Saeid Study on Physical Properties of Poly(ethylene terephthalate) Bi-shrinkage Yarns [Volume 8, Issue 2, 2020, Pages 1-14]
Fayyazi, Mohammadreza Biological Properties of Blend Nanofibrous Scaffolds from Poly(caprolactone)-Chitosan-Poly(vinyl alcohol) [Volume 6, Issue 1, 2018, Pages 3-8]
Feiz, Mahmoud A Study on the Kinetic and Thermodynamic Parameters of Different Acid Dyes on Nylon 6 Fibers [Volume 5, Issue 1, 2017, Pages 31-36]
Fonouni, Milad Investigating the Effect of Various Oxidizing Agents on the Surface Functionalization of Microporous Polypropylene Membranes [Volume 4, Issue 2, 2016, Pages 92-100]
Forooghi Hassanabadi, Iman Strategies for the Development of Science and Technology of Protective Layers Against Bullets and Fragments [Volume 10, Issue 2, 2022, Pages 15-30]
Foroozmehr, Foza Removal of Reactive Dyes from Wastewater using Cyclodextrin Functionalized Polyacrylonitrile Nanofibrous Membranes [Volume 4, Issue 1, 2015, Pages 45-52]
Ghanbar Afjeh, Mansoureh Colorimetric and spectral properties of natural colorants used in handmade traditional Persian carpets [Volume 1, Issue 2, 2013, Pages 98-104]
Ghane, Mohammad Viscoelastic Modeling of the Recovery Behavior of Cut Pile Carpet After Static Loading: A Comparison Between Linearand Nonlinear Models [Volume 6, Issue 1, 2018, Pages 9-14]
Ghanean, Sarvenaz Colorimetric and spectral properties of natural colorants used in handmade traditional Persian carpets [Volume 1, Issue 2, 2013, Pages 98-104]
Ghareh aghaji, Aliakbar A Review on the Self-Healing Property of Core-Sheath Nanofibers: Applications and Recent Advances [Volume 12, Issue 3, 2024]
Gharehaghaji, Ali Akbar How Porous Nanofibers Have Enhanced the Engineering of Advanced Materials: A Review [Volume 5, Issue 2, 2017, Pages 3-21]
Gharehaghaji, Ali Akbar Fabrication and Characterization of Electrospun Wool Nanoparticles/Nylon 6 Composite Nanofiber Yarn [Volume 10, Issue 1, 2022, Pages 65-78]
Gharehaghaji, Ali Akbar Investigation of the Possibility of Generating Electric Current from PVDF/PU Polymer Alloy Layer under Cyclic Tensile Loading [Volume 10, Issue 4, 2022, Pages 21-32]
Gharehaghaji, Ali Akbar Experimental study on the effect of braiding angle on the fracture behavior of 2D braided composite cylinders [Volume 11, Issue 3, 2023, Pages 11-17]
Ghasemi, Reza Effect of the structural components of the third generation of artificial football turf on shock absorption [Volume 11, Issue 1, 2023, Pages 27-34]
Ghasemi-Mobarakeh, Laleh An overview of recent advances in the development of MXene nanoplates-based textiles [Volume 11, Issue 2, 2023, Pages 85-114]
Ghasemkhah, Farzaneh Fabrication of Bovine Serum Albumin-Loaded Coaxial Electrospun Thread with an Aligned Core-Shell Fibrous Structure [Volume 8, Issue 1, 2020, Pages 75-84]
Ghasemy Yaghin, Reza Effect of Apparel In-store Merchandise Displays in Men’s Stores on Customer Behavior: A Case Study of Tehran City [Volume 9, Issue 2, 2021, Pages 27-42]
Ghazimoradi, Mahdi Evaluation of the fabric formability by concentrated loading method [Volume 2, Issue 2, 2014, Pages 16-19]
Gholami Houjeghan, Fatemeh Evaluation of Color Sensitivity to Dyeing Parameters in Natural Dyeing with Anthocyanin [Volume 5, Issue 2, 2017, Pages 43-48]
Gholipour-Kanani, Adeleh Biological Properties of Blend Nanofibrous Scaffolds from Poly(caprolactone)-Chitosan-Poly(vinyl alcohol) [Volume 6, Issue 1, 2018, Pages 3-8]
Gholipour-Kanani, Adeleh A Review on Centrifugal and Electro-Centrifugal Spinning as New Methods of Nanofibers Fabrication [Volume 10, Issue 1, 2022, Pages 41-55]
Ghorbani, Vahid Predicting the Hairiness of Cotton Rotor Spinning Yarns by Artificial Intelligence [Volume 6, Issue 1, 2018, Pages 15-21]
Ghorbani, Vahid Role of Fabric Structure on the Second Tensile Elastic Modulus of Net Warp-Knitted Fabrics [Volume 9, Issue 3, 2021, Pages 29-36]
Ghorbani, Vahid Flexural Behavior of Concrete-Mortar Composites Reinforced with Net Spacer warp Knitted Fabrics [Volume 12, Issue 4, 2024]
Goodarz, Mostafa DDES: Dyeing diagnostic expert system for the textile coloration [Volume 2, Issue 1, 2014, Pages 11-16]
Goudarzi, Gholamreza Straightforward and highly-efficient feather keratin extraction by systematic optimization of sodium sulfide treatment process [Volume 11, Issue 1, 2023, Pages 57-67]
G. Rudrayya, Math Characterizing Physicochemical Properties of Enset Starch [Volume 8, Issue 1, 2020, Pages 43-52]
Guirado, Gonzalo Influence of Dopant Type on the Color Gamut of a Polypyrrole Electrochromic Layer [Volume 10, Issue 4, 2022, Pages 33-44]
H
Hadizadeh, Mohsen Investigations on the Reinforcement of Mechanical Properties of Gypsum Composites Containing E-glass Woven Fabrics [Volume 4, Issue 1, 2015, Pages 20-26]
Hadizadeh, Mohsen Application of Response Surface Methodology for Modeling the Color Strength of Natural Hair Colorant [Volume 7, Issue 1, 2019, Pages 15-23]
Hadizadeh, Mohsen Applying Fuzzy Logic Model for Bending Rigidity Evaluation of Woven Fabrics [Volume 7, Issue 1, 2019, Pages 61-68]
Hadizadeh, Mohsen Applying Fuzzy Logic Model for Static Puncture Evaluation of Nonwoven Needle-Punched Polyester Fabrics [Volume 10, Issue 1, 2022, Pages 31-39]
Hadjizadeh, Afra Fabrication of Bovine Serum Albumin-Loaded Coaxial Electrospun Thread with an Aligned Core-Shell Fibrous Structure [Volume 8, Issue 1, 2020, Pages 75-84]
Haghighat kish, Mohammad Investigation of the effect of polyamidoamine on the final properties of polyvinyl alcohol-based hydrogels [Volume 12, Issue 2, 2024]
Haghighat Kish, Mohammad Thermal Analysis of Acrylonitrile/Acrylic Acid Copolymer Dendrigrafted with Citric Acid [Volume 4, Issue 1, 2015, Pages 27-36]
Haghighat Kish, Mohammad Face Masks: From the Coronavirus Crisis and Environmental Challenges to Recycling Opportunities [Volume 12, Issue 2, 2024]
Hajiani, Farideh Fabrication and Characterization of Electrospun Wool Nanoparticles/Nylon 6 Composite Nanofiber Yarn [Volume 10, Issue 1, 2022, Pages 65-78]
Hajiani, Farideh Effect of Woven Fabric Structure on the Water Filtration Efficiency [Volume 10, Issue 2, 2022, Pages 64-49]
Halvaei, Mana Enhancement of composite performance by hollow polyester fibers [Volume 2, Issue 2, 2014, Pages 5-10]
Haririan, Yasamin Comparison of structural specifications and elastic properties of Iranian medical bandages [Volume 10, Issue 4, 2022, Pages 103-115]
Hasanalizadeh, Fatemeh New Approach to characterize low-velocity impact behavior of sandwich-structured composite reinforced with weft-knitted spacer fabric [Volume 10, Issue 3, 2022, Pages 35-41]
Hasani, Hossein Investigation into the Curling Intensity of Polyester/Cotton Single Jersey Weft Knitted fabric Using Finite Element Method [Volume 3, Issue 2, 2015, Pages 86-90]
Heidari, Abbas Ali Inkjet-Fabricated Capacitors on Paper and Textile Fabrics [Volume 7, Issue 1, 2019, Pages 45-52]
Heidari Golfazani, Mohammad ebrahim Degumming of silk yarn using alkali, enzyme and seidlitzia rosmarinus [Volume 1, Issue 2, 2013, Pages 60-64]
Hejazi, Sayyed Mahdi Theoretical and Experimental Investigation into the Adhesion between Fiber-Reinforced Bitumen and Aggregates by Using Pull-out Method [Volume 5, Issue 1, 2017, Pages 17-24]
Hejazi, Sayyed Mahdi Using linear mean and variance technique to evaluate the pattering in random winding process [Volume 3, Issue 1, 2015, Pages 5-10]
Hejazi, Seyed Mehdi Effects of Fibrous Layer Structure on Tensile Behavior and Fracture Toughness of E-Glass/Epoxy Composites: A Comparison Between Angle Plied and Woven Layers [Volume 12, Issue 1, 2024]
Hemmatinej, Nahid ad Advances in Research and Applications of Smart Hydrogels Part I: Preparation Methods and Classification [Volume 6, Issue 2, 2018, Pages 97-105]
Hemmati Nejad, Nahid Nanocomposite film of recycled silk powder and polypropylene [Volume 2, Issue 2, 2014, Pages 20-24]
Hemmatinezhad, Nastaran Reinforcing Concrete Columns with Winding Technique Using Weft Knitted Structure [Volume 9, Issue 2, 2021, Pages 15-25]
Heydari, Sepide Enhancing Yarn Coverage with Electrospun Polyacrylonitrile Nanofibers via the Pin Spinning Method: An Investigation of Influencing Parameters [Volume 11, Issue 4, 2023, Pages 54-63]
Hosseini, Seyed Abdolkarim Fabrication of Biodegradable PCL Particles as well as PA66 Nanofibers via Air-Sealed Centrifuge Electrospinning (ASCES) [Volume 4, Issue 1, 2015, Pages 15-19]
Hosseini, Seyed Abdolkarim Removal of Reactive Dyes from Wastewater using Cyclodextrin Functionalized Polyacrylonitrile Nanofibrous Membranes [Volume 4, Issue 1, 2015, Pages 45-52]
Hosseini Ghavam Abadi, Roya Improvement of tensile strength of glass/epoxy multilayer composites by addition of short glass fibers [Volume 11, Issue 4, 2023, Pages 22-30]
Hosseini Ravandi, S. Abdolkarim Two Robust Fuzzy Regression Models and Their Applications in Predicting Imperfections of Cotton Yarn [Volume 4, Issue 2, 2016, Pages 60-68]
Hosseini Ravandi, Seyed Abdolkarim Investigating Moisture Management Property of a Bi-layer Fabric Through Nanofiber-coated PET as a Novel Sewing Thread: Vertical Wicking Test [Volume 6, Issue 1, 2018, Pages 23-30]
Hosseini Ravandi, Seyyed Abdolkarim Numerical study on the jet dynamic through centrifuge spinning: influence of angular velocity [Volume 3, Issue 1, 2015, Pages 24-29]
Hosseini Ravandi, Seyyed Abdolkarim Recent advances in electrospinning of some selected biopolymers (pages 70 to 78) [Volume 1, Issue 2, 2013, Pages 70-78]
Hosseini Varkiyani, Seyed Mohammad Evaluation of Floorcovering Abrasion Resistance by Means of Image Processing Technique [Volume 3, Issue 2, 2015, Pages 40-45]
Izadan, Hossein Innovative Method for Demineralization of Cellulosic Substrates via Morpholinium Hydrogen Sulfate [Volume 10, Issue 3, 2022, Pages 3-12]
Izadan, Hossein Influence of Dopant Type on the Color Gamut of a Polypyrrole Electrochromic Layer [Volume 10, Issue 4, 2022, Pages 33-44]
J
Jafari, Mostafa Relationship Between the Comfort Properties of Sport Wear and the Comfort Sensation of Athlete During Activity [Volume 9, Issue 2, 2021, Pages 70-57]
Jafari, Razieh Investigating the correlation between precision and trueness of spectrophotometers in measuring the whiteness index and tint factor of none fluorescence white ceramic [Volume 11, Issue 2, 2023, Pages 27-17]
Jafari, Sahar Viscoelastic Modeling of the Recovery Behavior of Cut Pile Carpet After Static Loading: A Comparison Between Linearand Nonlinear Models [Volume 6, Issue 1, 2018, Pages 9-14]
Jahanmard-Hosseinabadi, Fatemeh Comprehensive Comparison Between Mechanical Properties of Nanofiber Matrix and Single Nanofibers [Volume 7, Issue 2, 2019, Pages 37-46]
Jahanshahi, Mohsen Fuzzy VIKOR Optimization for Designing High Performance Hydroxyapatite/Polycaprolactone Scaffolds for Hard Tissue Engineering [Volume 8, Issue 1, 2020, Pages 17-36]
Jalili, Mohammad Mahdi Study on Linear Density Effect on the Vibration Behavior of Textile Strings Using Video Processing [Volume 8, Issue 2, 2020, Pages 41-51]
Jalili, Mohammad Mahdi Modeling and Optimization of Mass and Spring Based Vibration String Using Modal Analysis and Imperialist Competition Optimization Algorithm Methods [Volume 9, Issue 2, 2021, Pages 43-56]
Jamshidi Avanaki, Mostafa A novel approach in geometrical-mechanical analysis of plain woven fabrics; Initial load-extension behavior [Volume 2, Issue 1, 2014, Pages 38-46]
Jamshidi Avanaki, Mostafa Maximum Negative Poisson’s Ratio of Double-Core Helical Auxetic Yarns Under Uniaxial Loading: A Study on the Effect of Structural Parameters via Full Factorial Experimental Design Method [Volume 9, Issue 3, 2021, Pages 37-44]
Jamshidi Avanaki, Mostafa Production and Characterization of PVDF/MWCNT Core-Shell Hybrid Nanofiber Yarns via Nozzle-less Disc Electrospinning Method [Volume 12, Issue 2, 2024]
Jamshidi Avanaki, Mostafa Preparation and characterization of wet spun fibers based on TPU/PVDF/CNT [Volume 12, Issue 2, 2024]
Javadi Toghchi, Marzieh Investigation into the geometrical loop effect on tensile behavior of single bar warp-knitted fabric using finite element method [Volume 1, Issue 1, 2013, Pages 31-35]
Javanbakht, Mehran Adsorption Properties of Thiol-Functionalized Silica Nanoparticles Prepared for Application in Poly(ether sulfone) Nanocomposite Membranes [Volume 5, Issue 1, 2017, Pages 37-47]
K
Kakvan, Ali Analysis of the Thermal Comfort Properties and Heat Protection Performance of Cotton/Nylon-Kermel Fabrics [Volume 4, Issue 1, 2015, Pages 37-44]
Kamali Dolatabadi, Mehdi Damage Detection of Carbon Fiber-reinforced Concrete Under Bending Test [Volume 6, Issue 1, 2018, Pages 39-45]
Kamali Moghaddam, Meghdad Evaluation of the Effect of Mordant Types and Dyeing Methods on the Color Properties of Viscose Lycra Fabric Dyed with Hibiscus Sabdariffa Calyces [Volume 10, Issue 4, 2022, Pages 61-73]
Kamani, Rooholla Damage Detection of Carbon Fiber-reinforced Concrete Under Bending Test [Volume 6, Issue 1, 2018, Pages 39-45]
Kargar, Motahareh Optimization of Fabric Layout by Using Imperialist Competitive Algorithm [Volume 3, Issue 2, 2015, Pages 55-63]
Kargar, Motahareh Simulation of Seam Puckering in Woven Fabrics with a Yarn-Level Numerical Model [Volume 10, Issue 4, 2022, Pages 3-19]
Karimi, Mohammad Thermal Analysis of Acrylonitrile/Acrylic Acid Copolymer Dendrigrafted with Citric Acid [Volume 4, Issue 1, 2015, Pages 27-36]
Karimi, Mohammad Adsorption Properties of Thiol-Functionalized Silica Nanoparticles Prepared for Application in Poly(ether sulfone) Nanocomposite Membranes [Volume 5, Issue 1, 2017, Pages 37-47]
Karimi, Mohammad Influence of solvent/polymer interaction on miscibility of PMMA/PCL blend: thermal analysis approach [Volume 2, Issue 2, 2014, Pages 32-38]
Karimi, Mohammad Analysis the diffusion process for polymer solution using FTIR-ART technique: special considerations [Volume 1, Issue 1, 2013, Pages 1-8]
Karimi Rabbani, Shadi Nanocomposite film of recycled silk powder and polypropylene [Volume 2, Issue 2, 2014, Pages 20-24]
Kazemi, Hamideh Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method [Volume 11, Issue 3, 2023, Pages 19-27]
Kazerooni, Hanif Strategies for the Development of Science and Technology of Protective Layers Against Bullets and Fragments [Volume 10, Issue 2, 2022, Pages 15-30]
Kazlauciunas, Algy A Study on ZnO Nanorod Arrays Formed on the Surface of Polyester Fabric [Volume 4, Issue 2, 2016, Pages 53-59]
K. Dolatabadi, Mehdi The effect of the structural characteristics of plain knitted fabrics on the sound absorption coefficient: in single-layer and multi-layer [Volume 11, Issue 2, 2023, Pages 49-59]
Khadamalhosseini, Nader Modeling of impact damage of sewing machine needle on woven fabric by finite element method [Volume 1, Issue 1, 2013, Pages 19-23]
Khajeh Mehrizi, Mohammad Application of Response Surface Methodology for Modeling the Color Strength of Natural Hair Colorant [Volume 7, Issue 1, 2019, Pages 15-23]
Khalajmehri, Kimia Effect of Apparel In-store Merchandise Displays in Men’s Stores on Customer Behavior: A Case Study of Tehran City [Volume 9, Issue 2, 2021, Pages 27-42]
Khalili, Najmeh Investigating the correlation between precision and trueness of spectrophotometers in measuring the whiteness index and tint factor of none fluorescence white ceramic [Volume 11, Issue 2, 2023, Pages 27-17]
Khasheie, Simindokht Effect of wet spinning parameters of Acrylic copolymers in DMF- H2O on the physical and mechanical properties of fibers obtained [Volume 12, Issue 4, 2024]
Kheirandish, Maryam Investigating of Transesterification and Properties of Polyethylene Terephthalate/Polylactic Acid Blend Film [Volume 11, Issue 2, 2023, Pages 15-3]
Kheirkhah Barzoki, Parvaneh Modeling the Properties of Core-Compact Spun Yarn Using Artificial Neural Network [Volume 4, Issue 2, 2016, Pages 101-105]
Khoddami, Akbar Effect of different poly (ethylene terephethalate) hydrolysis to manipulate proper nano-surface structures for fabricating ultra hydrophobic substrate [Volume 1, Issue 1, 2013, Pages 36-42]
Khoddami, Akbar Poly(lactic acid) (PLA) Nanofibers for Bone Tissue Engineering [Volume 7, Issue 2, 2019, Pages 47-64]
Khoddami, Akbar Innovative Method for Demineralization of Cellulosic Substrates via Morpholinium Hydrogen Sulfate [Volume 10, Issue 3, 2022, Pages 3-12]
Khoddami, Akbar Insect repellent finish of cotton fabric using natural eucalyptus, clove and Myrtle [Volume 11, Issue 2, 2023, Pages 61-84]
Khonakdar, Hossein ALi Preparation, characterization, and antibacterial properties of PVA/gelatin/ sodium alginate/ silver nanofibers [Volume 13, Issue 1, 2025]
Khosravi, Ali Flexural Behavior of Concrete-Mortar Composites Reinforced with Net Spacer warp Knitted Fabrics [Volume 12, Issue 4, 2024]
Kotek, Richard Effect of Melt Spinning Variables on the Structural Changes of Recycled and Bottle Grade Filament Yarn PET [Volume 6, Issue 2, 2018, Pages 67-75]
Laghari, Rashid Ali Cost Comparison of Ring Spun Yarn of China Hui Hong Polyester Fiber and Blended Yarn of Khalis and PSL Polyesters Fiber [Volume 6, Issue 2, 2018, Pages 77-82]
Latifi, Masoud Evaluation of Floorcovering Abrasion Resistance by Means of Image Processing Technique [Volume 3, Issue 2, 2015, Pages 40-45]
Latifi, Masoud Experimental study of the of the thermo-regulating property of clothing system contained different melting point microencapsulated PCMs [Volume 3, Issue 1, 2015, Pages 11-15]
Latifi, Masoud Enhancement of composite performance by hollow polyester fibers [Volume 2, Issue 2, 2014, Pages 5-10]
Latifi, Masoud Modeling of impact damage of sewing machine needle on woven fabric by finite element method [Volume 1, Issue 1, 2013, Pages 19-23]
Latifi, Masoud Fabrication of Bovine Serum Albumin-Loaded Coaxial Electrospun Thread with an Aligned Core-Shell Fibrous Structure [Volume 8, Issue 1, 2020, Pages 75-84]
Latifi, Masoud Comparison of Structural Modification and Argon Plasma Treatment of Poly(lactide-co-glycolic acid) Nanofibrous Scaffolds for Cell Culture [Volume 8, Issue 2, 2020, Pages 33-40]
Latifi, Masoud An Overview of Protective Gloves with Regards to Hand Performance and the Evaluation Methods [Volume 9, Issue 3, 2021, Pages 3-20]
Latifi, Masoud 3D printing of thermoset composite reinforced with continuous fibers and evaluation of its mechanical properties [Volume 11, Issue 4, 2023, Pages 3-11]
Lolaki, Asal Investigation of Acoustic Properties of Satin 7/1 Woven Fabrics Containing Hollow and Micro-porous Yarns [Volume 6, Issue 1, 2018, Pages 31-37]
M
Madufor, Innocent C. Transport Characteristics of Benzene through Palm Mesocarp Fibre/Low Density Polyethylene Composites [Volume 6, Issue 2, 2018, Pages 83-95]
Mahdi, Rasoul Using linear mean and variance technique to evaluate the pattering in random winding process [Volume 3, Issue 1, 2015, Pages 5-10]
Maheronnaghsh, Mehrnoush Comparison of the Anti-Fungal Effect of Electro-Spinning Drug-Loaded Nano-Fibers and Pad Dry Drug-Loaded Fabrics [Volume 8, Issue 1, 2020, Pages 37-42]
Mahfoozi, kamran Production and Characterization of PVDF/MWCNT Core-Shell Hybrid Nanofiber Yarns via Nozzle-less Disc Electrospinning Method [Volume 12, Issue 2, 2024]
Malakpour, Shadpour Effect of different poly (ethylene terephethalate) hydrolysis to manipulate proper nano-surface structures for fabricating ultra hydrophobic substrate [Volume 1, Issue 1, 2013, Pages 36-42]
Mandegari, Mansoor An overview of recent advances in the development of MXene nanoplates-based textiles [Volume 11, Issue 2, 2023, Pages 85-114]
Mashroteh, Hasan Applying Fuzzy Logic Model for Static Puncture Evaluation of Nonwoven Needle-Punched Polyester Fabrics [Volume 10, Issue 1, 2022, Pages 31-39]
Mashroteh, Hasan A Review on the Compression Properties and Feet Feeling Comfort of Hand-Knotted Carpet [Volume 10, Issue 4, 2022, Pages 75-101]
Mashrouteh, Hasan Prediction of random-velour needle punching force using artificial neural network [Volume 1, Issue 2, 2013, Pages 91-97]
Mashrouteh, Hasan Behavior Analysis of the Nonwoven Needle-Punched Polyester Fabrics Due to Compression Loading [Volume 7, Issue 1, 2019, Pages 33-43]
Masoumi, Mehrdad Theoretical and Experimental Investigation into the Adhesion between Fiber-Reinforced Bitumen and Aggregates by Using Pull-out Method [Volume 5, Issue 1, 2017, Pages 17-24]
Mazloomi, Zinatsadat Investigation of The effect of E-glass/carbon hybridization on the buckling behavior of woven fabric reinforced composite laminates [Volume 12, Issue 1, 2024]
Mazrouei Sebdani, Zahra Effect of different poly (ethylene terephethalate) hydrolysis to manipulate proper nano-surface structures for fabricating ultra hydrophobic substrate [Volume 1, Issue 1, 2013, Pages 36-42]
Mehran, Mahbobeh Study on Physical Properties of Poly(ethylene terephthalate) Bi-shrinkage Yarns [Volume 8, Issue 2, 2020, Pages 1-14]
Mehrmazaheri, Firooz DDES: Dyeing diagnostic expert system for the textile coloration [Volume 2, Issue 1, 2014, Pages 11-16]
Mehrmazaheri, Firooz Colorimetric and spectral properties of natural colorants used in handmade traditional Persian carpets [Volume 1, Issue 2, 2013, Pages 98-104]
Merati, Ali Akbar Advances in Research and Applications of Smart Hydrogels Part I: Preparation Methods and Classification [Volume 6, Issue 2, 2018, Pages 97-105]
Merati, Ali Akbar Comparison of Structural Modification and Argon Plasma Treatment of Poly(lactide-co-glycolic acid) Nanofibrous Scaffolds for Cell Culture [Volume 8, Issue 2, 2020, Pages 33-40]
Midrehghan, Abolfazl Experimental Study on the Bending Behavior of 3D Woven Glass Fiber Sandwich Composite Panels [Volume 9, Issue 2, 2021, Pages 3-14]
Minapoor, Shohreh Investigation into the Curling Intensity of Polyester/Cotton Single Jersey Weft Knitted fabric Using Finite Element Method [Volume 3, Issue 2, 2015, Pages 86-90]
Mirdehghan, Sayed Abolfazl The flexural behavior of Stitched Polyurethane Foam Composite Sandwich Structures [Volume 11, Issue 3, 2023, Pages 3-10]
Mirdehghan, Sayed Abolfazl Improvement of tensile strength of glass/epoxy multilayer composites by addition of short glass fibers [Volume 11, Issue 4, 2023, Pages 22-30]
Mirdehghan, Seyed Abolfazl The effect of loom parameters on some properties of woven fabrics [Volume 11, Issue 4, 2023, Pages 43-53]
Miremad, Seyed Hossein Biological Applications of Double Nanofibers based on Silk Fibroin [Volume 11, Issue 4, 2023, Pages 31-42]
Mirjalili, Mohammad Investigation of the Effects of Graphene Oxide Nanoparticles and Multi-Wall Carbon Nanotubes on Conductivity and Surface Morphology of Polyester-Viscose Fabric [Volume 7, Issue 2, 2019, Pages 13-24]
Mirjalili, Mohammad Synthesis of Graphene/Zinc Stannate Nanocomposite on Cotton Fabric to Obtain Multi-Functional Properties [Volume 10, Issue 4, 2022, Pages 45-59]
Mirjalili, Mohammad Reza Experimental and analytical study on tensile strength of short-fiber-reinforced adobe (SFRA) [Volume 11, Issue 3, 2023, Pages 29-38]
Mir Mohammad Hosseini, S. Majdeddin Role of Geogrid’s Structure on the California Bearing Ratio of the Reinforced Soil [Volume 12, Issue 1, 2024]
Moezzi, Meysam Mechanical Properties of Needle-Punched Fabrics in Relation to Fiber Orientation [Volume 5, Issue 1, 2017, Pages 48-55]
Mohaddes Mojtahedi, Mohammad Reza Effect of Melt Spinning Variables on the Structural Changes of Recycled and Bottle Grade Filament Yarn PET [Volume 6, Issue 2, 2018, Pages 67-75]
Mohades Mojtahedi, Mohammad Reza Investigating of Transesterification and Properties of Polyethylene Terephthalate/Polylactic Acid Blend Film [Volume 11, Issue 2, 2023, Pages 15-3]
Mohammad Ali Malek, Reza DDES: Dyeing diagnostic expert system for the textile coloration [Volume 2, Issue 1, 2014, Pages 11-16]
Mohassel, Zahra Real Silk Degumming Wastewater Remediation: Simple Applicable Recovery of Sericin Micro and Nano powders [Volume 5, Issue 2, 2017, Pages 49-54]
Mokhtari, Fatemeh Evaluation of Floorcovering Abrasion Resistance by Means of Image Processing Technique [Volume 3, Issue 2, 2015, Pages 40-45]
Molavi, Hossein Reinforcing Concrete Columns with Winding Technique Using Weft Knitted Structure [Volume 9, Issue 2, 2021, Pages 15-25]
Mollazadeh, Sanaz Investigating the Effect of Various Oxidizing Agents on the Surface Functionalization of Microporous Polypropylene Membranes [Volume 4, Issue 2, 2016, Pages 92-100]
Momeni Nasab, Mohammad Inkjet-Fabricated Capacitors on Paper and Textile Fabrics [Volume 7, Issue 1, 2019, Pages 45-52]
Mominul Alam, Shaikh Md. The Consequences of Temperature on the Shrinkage Properties of Cotton Spandex Woven Fabric [Volume 7, Issue 1, 2019, Pages 25-29]
Montazer, Majid Electrically and Electrochemically Active Composite Based on Polyester/Reduced Graphene Oxide/Polypyrrole with Remarkable Washing Durability [Volume 8, Issue 2, 2020, Pages 15-22]
Morad, Hamed Fuzzy VIKOR Optimization for Designing High Performance Hydroxyapatite/Polycaprolactone Scaffolds for Hard Tissue Engineering [Volume 8, Issue 1, 2020, Pages 17-36]
Moradi, Hamidreza Study on morphological, structural, electrical, and electromagnetic shielding properties of carbon fabric coated with nickel and cobalt by electroplating method [Volume 12, Issue 2, 2024]
Moradi, Hamid Reza An overview of synthetic microfibers: fabrication, properties, applications and environmental problems [Volume 11, Issue 2, 2023, Pages 29-47]
Moradi, Masoud Enhancing Yarn Coverage with Electrospun Polyacrylonitrile Nanofibers via the Pin Spinning Method: An Investigation of Influencing Parameters [Volume 11, Issue 4, 2023, Pages 54-63]
Mostajeran, Masoud Insect repellent finish of cotton fabric using natural eucalyptus, clove and Myrtle [Volume 11, Issue 2, 2023, Pages 61-84]
Mostashfi, Amir Strength analysis of seamless double layered fabric using FEM [Volume 2, Issue 1, 2014, Pages 17-20]
Mousazadegan, Fatemeh Investigation of the Tearing Performance of Fabrics with Various Constructions, Woven from Different Yarn Spinning Systems [Volume 5, Issue 2, 2017, Pages 22-28]
Mousazadegan, Fatemeh Relationship Between the Comfort Properties of Sport Wear and the Comfort Sensation of Athlete During Activity [Volume 9, Issue 2, 2021, Pages 70-57]
Mousazadegan, Fatemeh An Overview of Protective Gloves with Regards to Hand Performance and the Evaluation Methods [Volume 9, Issue 3, 2021, Pages 3-20]
Mozafary, Vajiha Online Control System Design for Selvedge Waste Length in Rapier Weaving Loom [Volume 7, Issue 2, 2019, Pages 73-80]
Mozafary, Vajihe Investigating Nonlinear Kelvin Model Accuracy Optimized by Genetic Algorithm for Determining Drying Behavior of Knitted Fabric [Volume 4, Issue 1, 2015, Pages 1-8]
Mozafary, Vajihe Modeling the feeding process in gill-box using non-linear mass-spring system [Volume 2, Issue 2, 2014, Pages 39-42]
Mozafary, Vajiheh Simulation of Seam Puckering in Woven Fabrics with a Yarn-Level Numerical Model [Volume 10, Issue 4, 2022, Pages 3-19]
N
Nadipour, Fatemeh Comparison of Structural Modification and Argon Plasma Treatment of Poly(lactide-co-glycolic acid) Nanofibrous Scaffolds for Cell Culture [Volume 8, Issue 2, 2020, Pages 33-40]
Naghashzargar, Elham Fabrication and characterization of PCL nanofibrous networks containing ZnO and Ag for enhanced antibacterial properties [Volume 12, Issue 1, 2024]
Najafi, Seyed Jalaledin Strategies for the Development of Science and Technology of Protective Layers Against Bullets and Fragments [Volume 10, Issue 2, 2022, Pages 15-30]
Najafloo, Behzad 3D printing of thermoset composite reinforced with continuous fibers and evaluation of its mechanical properties [Volume 11, Issue 4, 2023, Pages 3-11]
Najahi Osgooei, Alireza The effect of loom parameters on some properties of woven fabrics [Volume 11, Issue 4, 2023, Pages 43-53]
Nasiri, Fatemeh Fuzzy VIKOR Optimization for Designing High Performance Hydroxyapatite/Polycaprolactone Scaffolds for Hard Tissue Engineering [Volume 8, Issue 1, 2020, Pages 17-36]
Nasouri, Komeil An overview of recent advances in the development of MXene nanoplates-based textiles [Volume 11, Issue 2, 2023, Pages 85-114]
Nasouri, Komeil An overview of synthetic microfibers: fabrication, properties, applications and environmental problems [Volume 11, Issue 2, 2023, Pages 29-47]
Nasouri, Komeil Study on morphological, structural, electrical, and electromagnetic shielding properties of carbon fabric coated with nickel and cobalt by electroplating method [Volume 12, Issue 2, 2024]
Nasr-Esfahani, Mohammad Enhancement of composite performance by hollow polyester fibers [Volume 2, Issue 2, 2014, Pages 5-10]
Nasr-Isfahani, Mohammad Modeling of impact damage of sewing machine needle on woven fabric by finite element method [Volume 1, Issue 1, 2013, Pages 19-23]
Nasrollahzadeh, Kourosh Damage Detection of Carbon Fiber-reinforced Concrete Under Bending Test [Volume 6, Issue 1, 2018, Pages 39-45]
Nazari, Ali Investigation of the Effects of Graphene Oxide Nanoparticles and Multi-Wall Carbon Nanotubes on Conductivity and Surface Morphology of Polyester-Viscose Fabric [Volume 7, Issue 2, 2019, Pages 13-24]
Nazari, Ali Statistical Optimization of Durable Multifunctional Properties of Cellulase Cotton Using Nano-TiO2 Sonoloading [Volume 8, Issue 1, 2020, Pages 3-16]
Nazokdast, Hossein Investigating of Transesterification and Properties of Polyethylene Terephthalate/Polylactic Acid Blend Film [Volume 11, Issue 2, 2023, Pages 15-3]
Nikbakht Moghadam, Parastoo Effect of Geogrid Aperture Size and Soil Particle Size on Geogrid-Soil Interaction under Pull-Out Loading [Volume 5, Issue 1, 2017, Pages 25-30]
Noori Moafrad, Maedeh Effect of Number and Position of Tuck Stitches in the Pattern Repeat on the Quality of Rib Weft-Knitted Fabrics from the Point of Comfort [Volume 11, Issue 3, 2023, Pages 39-48]
Norouzi, Sanaz The effect of tensile cyclic forces on the tensile properties of seams with different stitch density of knitted fabrics [Volume 12, Issue 2, 2024]
Nosraty, Hooshang An Analytical Study of Initial Shear Behavior of Plain Woven Hybrid Fabrics [Volume 4, Issue 1, 2015, Pages 9-14]
Nosraty, Hooshang Study on Bending Damage of Intra-Ply Basalt/Nylon Hybrid Composites [Volume 6, Issue 2, 2018, Pages 59-66]
Nosraty, Hooshang Tensile behavior simulation of woven fabric with different weave pattern based on finite element method [Volume 3, Issue 1, 2015, Pages 38-43]
Nosraty, Hooshang Investigation of fatigue behavior of polyester filament woven fabrics under cyclic loading [Volume 1, Issue 1, 2013, Pages 43-52]
Nosraty, Hooshang Experimental Study on the Bending Behavior of 3D Woven Glass Fiber Sandwich Composite Panels [Volume 9, Issue 2, 2021, Pages 3-14]
Nosraty, Hooshang Effect of Woven Fabric Structure on the Water Filtration Efficiency [Volume 10, Issue 2, 2022, Pages 64-49]
Nosraty, Hooshang The flexural behavior of Stitched Polyurethane Foam Composite Sandwich Structures [Volume 11, Issue 3, 2023, Pages 3-10]
Nosraty, Hooshang Improvement of tensile strength of glass/epoxy multilayer composites by addition of short glass fibers [Volume 11, Issue 4, 2023, Pages 22-30]
Nosraty, Hooshang The effect of loom parameters on some properties of woven fabrics [Volume 11, Issue 4, 2023, Pages 43-53]
Nosraty, Houshang The Effect of Weave Structure and Wadded Weft Yarn Fineness on the Physical Properties of Three-Layer Woven Fabrics [Volume 10, Issue 2, 2022, Pages 92-79]
Nouri, Mahdi Preparation and characterization of wet spun fibers based on TPU/PVDF/CNT [Volume 12, Issue 2, 2024]
O
Obasi, Henry C. Transport Characteristics of Benzene through Palm Mesocarp Fibre/Low Density Polyethylene Composites [Volume 6, Issue 2, 2018, Pages 83-95]
P
Pajootan, Elmira Design of Dye Adsorption by Amine Terminated Dendritic Functionalized Halloysite Nanotubes Using Response Surface Methodology (RSM) [Volume 7, Issue 2, 2019, Pages 25-36]
Paknejad, Seyed Hassan Effective Parameters, Modeling, and Materials in Sound Absorption: A Review [Volume 10, Issue 1, 2022, Pages 3-21]
Panahi, Mohsen The Influence of Fiber Crimp on Acoustic Performance of Polypropylene Fibrous Batt [Volume 3, Issue 2, 2015, Pages 71-75]
Payvandy, Pedram Investigating Nonlinear Kelvin Model Accuracy Optimized by Genetic Algorithm for Determining Drying Behavior of Knitted Fabric [Volume 4, Issue 1, 2015, Pages 1-8]
Payvandy, Pedram Optimization of Fabric Layout by Using Imperialist Competitive Algorithm [Volume 3, Issue 2, 2015, Pages 55-63]
Payvandy, Pedram Measuring the Diameter of Nanofibers Extracted from Polyblend Fibers Using FCM Clustering Method [Volume 4, Issue 2, 2016, Pages 83-91]
Payvandy, Pedram Optimization of the thread take-up lever mechanism in lockstitch sewing machine using the imperialistic competitive algorithm [Volume 3, Issue 1, 2015, Pages 16-23]
Payvandy, Pedram Modeling the feeding process in gill-box using non-linear mass-spring system [Volume 2, Issue 2, 2014, Pages 39-42]
Payvandy, Pedram An Investigation of Structural-Mechanical Properties of Spun-Bonded Non-Woven Using Computer Vision Method [Volume 7, Issue 1, 2019, Pages 3-13]
Payvandy, Pedram Online Control System Design for Selvedge Waste Length in Rapier Weaving Loom [Volume 7, Issue 2, 2019, Pages 73-80]
Payvandy, Pedram Study on Linear Density Effect on the Vibration Behavior of Textile Strings Using Video Processing [Volume 8, Issue 2, 2020, Pages 41-51]
Payvandy, Pedram Development of Resizing Software for Paper Patterns [Volume 9, Issue 2, 2021, Pages 80-71]
Payvandy, Pedram Simulation of Seam Puckering in Woven Fabrics with a Yarn-Level Numerical Model [Volume 10, Issue 4, 2022, Pages 3-19]
Peyvandy, Pedram Modeling and Optimization of Mass and Spring Based Vibration String Using Modal Analysis and Imperialist Competition Optimization Algorithm Methods [Volume 9, Issue 2, 2021, Pages 43-56]
Pishevar, Ahmadreza Numerical study on the jet dynamic through centrifuge spinning: influence of angular velocity [Volume 3, Issue 1, 2015, Pages 24-29]
Psikuta, Agnes Analysis of the Thermal Comfort Properties and Heat Protection Performance of Cotton/Nylon-Kermel Fabrics [Volume 4, Issue 1, 2015, Pages 37-44]
R
Rabiei, Navid Face Masks: From the Coronavirus Crisis and Environmental Challenges to Recycling Opportunities [Volume 12, Issue 2, 2024]
Rahimi, Hosein Behavior Analysis of the Nonwoven Needle-Punched Polyester Fabrics Due to Compression Loading [Volume 7, Issue 1, 2019, Pages 33-43]
Rahimi, Mona Investigating the effect of various extraction solvents on the colorimetric and fastness properties of silk fabrics dyed with spent coffee grounds as the natural colorant [Volume 11, Issue 4, 2023, Pages 12-21]
Rahimzadeh, Hassan Effect of Woven Fabric Structure on the Water Filtration Efficiency [Volume 10, Issue 2, 2022, Pages 64-49]
Rahmatinejad, Jalal Innovative Method for Demineralization of Cellulosic Substrates via Morpholinium Hydrogen Sulfate [Volume 10, Issue 3, 2022, Pages 3-12]
Rajabi, Laleh Enhancing Yarn Coverage with Electrospun Polyacrylonitrile Nanofibers via the Pin Spinning Method: An Investigation of Influencing Parameters [Volume 11, Issue 4, 2023, Pages 54-63]
Rajabimehr, Arezoo Fabrication and Characterization of Electrospun Wool Nanoparticles/Nylon 6 Composite Nanofiber Yarn [Volume 10, Issue 1, 2022, Pages 65-78]
Ramakrishna, Seerma Recent advances in electrospinning of some selected biopolymers (pages 70 to 78) [Volume 1, Issue 2, 2013, Pages 70-78]
Ranjbar Mohammadi, Marziyeh Fabrication and characterization of PCL nanofibrous networks containing ZnO and Ag for enhanced antibacterial properties [Volume 12, Issue 1, 2024]
Rashidi, Abosaeed Providing a New Method for Evaluating the Nip Stability in Intermingled Yarn [Volume 10, Issue 1, 2022, Pages 23-30]
Rashidi, Abosaeed The effect of the structural characteristics of plain knitted fabrics on the sound absorption coefficient: in single-layer and multi-layer [Volume 11, Issue 2, 2023, Pages 49-59]
Rashidi, Abousaeed Investigation of the Effects of Graphene Oxide Nanoparticles and Multi-Wall Carbon Nanotubes on Conductivity and Surface Morphology of Polyester-Viscose Fabric [Volume 7, Issue 2, 2019, Pages 13-24]
Rasouli Rizi, Shekoufeh The flexural behavior of Stitched Polyurethane Foam Composite Sandwich Structures [Volume 11, Issue 3, 2023, Pages 3-10]
Rastgoo, Abbas A novel approach in geometrical-mechanical analysis of plain woven fabrics; Initial load-extension behavior [Volume 2, Issue 1, 2014, Pages 38-46]
Ravari, Fatemeh Biological Applications of Double Nanofibers based on Silk Fibroin [Volume 11, Issue 4, 2023, Pages 31-42]
Razavi Aghje, Mir Karim Experimental design applied to fabrication of PSf membranes via NIPS method Part1: Influential parameters on membrane porosity and mechanical strength [Volume 1, Issue 1, 2013, Pages 24-30]
Razbin, Milad Maximum Negative Poisson’s Ratio of Double-Core Helical Auxetic Yarns Under Uniaxial Loading: A Study on the Effect of Structural Parameters via Full Factorial Experimental Design Method [Volume 9, Issue 3, 2021, Pages 37-44]
Razbin, Milad Modeling Poisson’s Ratio and Tensile Behavior of Auxetic 4-Plied Yarn [Volume 11, Issue 3, 2023, Pages 49-57]
Rezadoost, Amir M.Experimental study on the effect of braiding angle on the fracture behavior of 2D braided composite cylinders [Volume 11, Issue 3, 2023, Pages 11-17]
Rezadoost, Amir M.3D printing of thermoset composite reinforced with continuous fibers and evaluation of its mechanical properties [Volume 11, Issue 4, 2023, Pages 3-11]
Rezaee-Shirin-Abadi, Abbas Experimental study of the of the thermo-regulating property of clothing system contained different melting point microencapsulated PCMs [Volume 3, Issue 1, 2015, Pages 11-15]
Rezaeian, Mehdi Development of Resizing Software for Paper Patterns [Volume 9, Issue 2, 2021, Pages 80-71]
Rezaye Soltanabadi, Zahra Straight-Line Loop Models for the Basic Structures of Weft Knitted Fabric (Plain, Rib 1×1, and Interlock) [Volume 10, Issue 3, 2022, Pages 13-21]
Rezvani-Boroujeni, Ahmad Adsorption Properties of Thiol-Functionalized Silica Nanoparticles Prepared for Application in Poly(ether sulfone) Nanocomposite Membranes [Volume 5, Issue 1, 2017, Pages 37-47]
Sabetzadeh, Niloufar How Porous Nanofibers Have Enhanced the Engineering of Advanced Materials: A Review [Volume 5, Issue 2, 2017, Pages 3-21]
Sadeghi, Abdolhossein Effect of the structural components of the third generation of artificial football turf on shock absorption [Volume 11, Issue 1, 2023, Pages 27-34]
Sadeghi, Abdolhosseni Characterization of fabric tensile loading curve in nonlinear region related to their structure; Part1: woven fabric [Volume 1, Issue 2, 2013, Pages 53-59]
Sadeghi-Sadeghabad, Milad Behavior Analysis of the Nonwoven Needle-Punched Polyester Fabrics Due to Compression Loading [Volume 7, Issue 1, 2019, Pages 33-43]
Sadeghi-Sadeghabad, Milad Applying Fuzzy Logic Model for Static Puncture Evaluation of Nonwoven Needle-Punched Polyester Fabrics [Volume 10, Issue 1, 2022, Pages 31-39]
Sadeghi-Sadeghabad, Milad A Review on the Compression Properties and Feet Feeling Comfort of Hand-Knotted Carpet [Volume 10, Issue 4, 2022, Pages 75-101]
Sadeghi-Sadeghabad, Milad Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method [Volume 11, Issue 3, 2023, Pages 19-27]
Safar Johari, Majid Investigating the RoCos Core Spun Compact Yarn Properties [Volume 5, Issue 2, 2017, Pages 37-42]
Safar Johari, Majid Predicting the Hairiness of Cotton Rotor Spinning Yarns by Artificial Intelligence [Volume 6, Issue 1, 2018, Pages 15-21]
Safar Johari, Majid Multi-Objective Optimization of Rotorcraft Compact Spinning Core-Spun Yarn Properties [Volume 6, Issue 1, 2018, Pages 47-53]
Safar Johari, Majid Simulation of cake formation for nano-fibrous filter media using image processing [Volume 2, Issue 1, 2014, Pages 5-10]
Safar Johari, Majid Theoretical Study on the Poisson’s Ratio of Tubular Braid’s Structure Considering Different Structural Deformation Regimes [Volume 12, Issue 3, 2024]
Safavi, Ali Experimental study of the of the thermo-regulating property of clothing system contained different melting point microencapsulated PCMs [Volume 3, Issue 1, 2015, Pages 11-15]
Saffari, Mohammad-Reza The effect of the structural characteristics of plain knitted fabrics on the sound absorption coefficient: in single-layer and multi-layer [Volume 11, Issue 2, 2023, Pages 49-59]
Saghafi, Reza Mechanical Properties of Needle-Punched Fabrics in Relation to Fiber Orientation [Volume 5, Issue 1, 2017, Pages 48-55]
Sahito, Iftikhar Ali Cost Comparison of Ring Spun Yarn of China Hui Hong Polyester Fiber and Blended Yarn of Khalis and PSL Polyesters Fiber [Volume 6, Issue 2, 2018, Pages 77-82]
Salarian, Elnaz Effect of APTES-Halloysite Nanotubes on the Release Characteristic of Cellulose Acetate/Curcumin Film [Volume 10, Issue 3, 2022, Pages 23-34]
Saleh Ahmadi, Mohammad Effect of Geogrid Aperture Size and Soil Particle Size on Geogrid-Soil Interaction under Pull-Out Loading [Volume 5, Issue 1, 2017, Pages 25-30]
Salehian, Mortaza Modeling Poisson’s Ratio and Tensile Behavior of Auxetic 4-Plied Yarn [Volume 11, Issue 3, 2023, Pages 49-57]
Salehi Beydokhti, Negar Chlorine Resistance of Thin Film Composite Polyamide Membrane Functionalized by Poly(amidoamine) Dendrimer [Volume 10, Issue 2, 2022, Pages 3-14]
Salehi esfandarani, Maryam Simulation of cake formation for nano-fibrous filter media using image processing [Volume 2, Issue 1, 2014, Pages 5-10]
Salehzadeh Nobary, Ali Shell buckling behavior of fused composite worsted fabrics [Volume 3, Issue 1, 2015, Pages 30-37]
Salimi, Hasan Effect of Woven Fabric Structure on the Water Filtration Efficiency [Volume 10, Issue 2, 2022, Pages 64-49]
Salimian, Azam Investigations on the Reinforcement of Mechanical Properties of Gypsum Composites Containing E-glass Woven Fabrics [Volume 4, Issue 1, 2015, Pages 20-26]
Saljoughi, Ehsan Application of Genetic Programming as a Powerful Tool for Modeling of Cellulose Acetate Membrane Preparation [Volume 5, Issue 1, 2017, Pages 1-7]
Samadikuchacksaraei, Ali Biological Properties of Blend Nanofibrous Scaffolds from Poly(caprolactone)-Chitosan-Poly(vinyl alcohol) [Volume 6, Issue 1, 2018, Pages 3-8]
Samiei sefat, Azar Insect repellent finish of cotton fabric using natural eucalyptus, clove and Myrtle [Volume 11, Issue 2, 2023, Pages 61-84]
Saremi, Raha Investigation of fatigue behavior of polyester filament woven fabrics under cyclic loading [Volume 1, Issue 1, 2013, Pages 43-52]
Semnani, Dariush Using linear mean and variance technique to evaluate the pattering in random winding process [Volume 3, Issue 1, 2015, Pages 5-10]
Semnani, Dariush Prediction of random-velour needle punching force using artificial neural network [Volume 1, Issue 2, 2013, Pages 91-97]
Semnani, Dariush Fuzzy VIKOR Optimization for Designing High Performance Hydroxyapatite/Polycaprolactone Scaffolds for Hard Tissue Engineering [Volume 8, Issue 1, 2020, Pages 17-36]
Semnani, Dariush Comparison of the Anti-Fungal Effect of Electro-Spinning Drug-Loaded Nano-Fibers and Pad Dry Drug-Loaded Fabrics [Volume 8, Issue 1, 2020, Pages 37-42]
Semnani, Dariush Strategies for the Development of Science and Technology of Protective Layers Against Bullets and Fragments [Volume 10, Issue 2, 2022, Pages 15-30]
Semnani, Dariush Influence of Dopant Type on the Color Gamut of a Polypyrrole Electrochromic Layer [Volume 10, Issue 4, 2022, Pages 33-44]
Sepehrizadeh, Zargham Straightforward and highly-efficient feather keratin extraction by systematic optimization of sodium sulfide treatment process [Volume 11, Issue 1, 2023, Pages 57-67]
Shahamati Fard, Farnaz Design of Dye Adsorption by Amine Terminated Dendritic Functionalized Halloysite Nanotubes Using Response Surface Methodology (RSM) [Volume 7, Issue 2, 2019, Pages 25-36]
Shahi, Zahra Application of Response Surface Methodology for Modeling the Color Strength of Natural Hair Colorant [Volume 7, Issue 1, 2019, Pages 15-23]
Shahmohammadi, Morteza Role of Geogrid’s Structure on the California Bearing Ratio of the Reinforced Soil [Volume 12, Issue 1, 2024]
Shahmoradi, Fateme Investigating the effect of various extraction solvents on the colorimetric and fastness properties of silk fabrics dyed with spent coffee grounds as the natural colorant [Volume 11, Issue 4, 2023, Pages 12-21]
Shahmoradi Ghaheh, Fatemeh Evaluation of the Effect of Mordant Types and Dyeing Methods on the Color Properties of Viscose Lycra Fabric Dyed with Hibiscus Sabdariffa Calyces [Volume 10, Issue 4, 2022, Pages 61-73]
Shaikh, Abdul Rauf Cost Comparison of Ring Spun Yarn of China Hui Hong Polyester Fiber and Blended Yarn of Khalis and PSL Polyesters Fiber [Volume 6, Issue 2, 2018, Pages 77-82]
Shaikhzadeh Najar, Saeed Analysis of the Thermal Comfort Properties and Heat Protection Performance of Cotton/Nylon-Kermel Fabrics [Volume 4, Issue 1, 2015, Pages 37-44]
Shaikhzadeh Najar, Saeed Providing a New Method for Evaluating the Nip Stability in Intermingled Yarn [Volume 10, Issue 1, 2022, Pages 23-30]
Shakeri, Mina Advances in Research and Applications of Smart Hydrogels Part I: Preparation Methods and Classification [Volume 6, Issue 2, 2018, Pages 97-105]
Shamsabadi, Amir Shahin A Study on the Kinetic and Thermodynamic Parameters of Different Acid Dyes on Nylon 6 Fibers [Volume 5, Issue 1, 2017, Pages 31-36]
Shanbeh, Mohsen Investigation of Acoustic Properties of Satin 7/1 Woven Fabrics Containing Hollow and Micro-porous Yarns [Volume 6, Issue 1, 2018, Pages 31-37]
Sharif, Farhad Electrically and Electrochemically Active Composite Based on Polyester/Reduced Graphene Oxide/Polypyrrole with Remarkable Washing Durability [Volume 8, Issue 2, 2020, Pages 15-22]
Sharifi, Hadi Prediction of Relaxed Woven Fabric Geometry Using Energy Method [Volume 6, Issue 2, 2018, Pages 107-115]
Sharifi, Mohadese Encapsulation of Zeolite/clindamycin drug into PXDDA/PVA nanofibers to investigate drug delivery [Volume 12, Issue 3, 2024]
Sharzaehee, Maryam Application of Oligomers with Urea Linkage as Flame Retardant and Antibacterial Materials in Jute Fabric [Volume 8, Issue 2, 2020, Pages 23-32]
Sharzehee, Maryam A Study on ZnO Nanorod Arrays Formed on the Surface of Polyester Fabric [Volume 4, Issue 2, 2016, Pages 53-59]
Sheikhzadeh, Mohammad Using linear mean and variance technique to evaluate the pattering in random winding process [Volume 3, Issue 1, 2015, Pages 5-10]
Sheikhzadeh, Mohammad Strength analysis of seamless double layered fabric using FEM [Volume 2, Issue 1, 2014, Pages 17-20]
Sheikhzadeh-Najar, Saeed Modeling of impact damage of sewing machine needle on woven fabric by finite element method [Volume 1, Issue 1, 2013, Pages 19-23]
Shenasa, Taraneh DDES: Dyeing diagnostic expert system for the textile coloration [Volume 2, Issue 1, 2014, Pages 11-16]
Shirzadeh Ajirloo, Siamak Providing a New Method for Evaluating the Nip Stability in Intermingled Yarn [Volume 10, Issue 1, 2022, Pages 23-30]
Shokrgozard, Mohammad Ali Fabrication of Bovine Serum Albumin-Loaded Coaxial Electrospun Thread with an Aligned Core-Shell Fibrous Structure [Volume 8, Issue 1, 2020, Pages 75-84]
Shokri, Elham Central composite experimental design applied to fabrication of LLDPE microporous membrane via thermally induced phase separation (TIPS) method [Volume 1, Issue 2, 2013, Pages 85-90]
Shokrieh, Mahmood M Experimental Study on the Bending Behavior of 3D Woven Glass Fiber Sandwich Composite Panels [Volume 9, Issue 2, 2021, Pages 3-14]
Solouk, Atefeh Effect of APTES-Halloysite Nanotubes on the Release Characteristic of Cellulose Acetate/Curcumin Film [Volume 10, Issue 3, 2022, Pages 23-34]
Soltanzade, Zeynab A model for Fabric Compressibility and Compressed Fabric Cover Factor Using Response Surface Metho [Volume 10, Issue 3, 2022, Pages 43-53]
Soltanzadeh, zeynab Simulation of 301 lockstitch at different stitch densities for the prediction of sewing thread consumption [Volume 12, Issue 3, 2024]
Soltanzadeh, Zeynab The effect of tensile cyclic forces on the tensile properties of seams with different stitch density of knitted fabrics [Volume 12, Issue 2, 2024]
Stawski, Dawid Quaternary Ammonium Salts of Poly(N,N-dimethylaminoethyl methacrylate) as an Efficient Antibacterial Agent for Polylactide Textiles [Volume 7, Issue 2, 2019, Pages 65-72]
T
Taheri, S. Mahmoud Two Robust Fuzzy Regression Models and Their Applications in Predicting Imperfections of Cotton Yarn [Volume 4, Issue 2, 2016, Pages 60-68]
Talebpour, Farideh Degumming of silk yarn using alkali, enzyme and seidlitzia rosmarinus [Volume 1, Issue 2, 2013, Pages 60-64]
Tavakkol, Elham Introducing a Method for Evaluating Fabric Performance against Human Body Thermal Radiation [Volume 12, Issue 1, 2024]
Tavakkoli, Akram Investigating the Effect of Various Oxidizing Agents on the Surface Functionalization of Microporous Polypropylene Membranes [Volume 4, Issue 2, 2016, Pages 92-100]
Tavanai, Hossein The Influence of Fiber Crimp on Acoustic Performance of Polypropylene Fibrous Batt [Volume 3, Issue 2, 2015, Pages 71-75]
Tavanai, Hossein Modeling and cost minimization of weigh reduction of a polyethylene terephthalate fabric bu sodium hydroxide [Volume 2, Issue 1, 2014, Pages 21-25]
Tavanaie, Mohammad Ali Measuring the Diameter of Nanofibers Extracted from Polyblend Fibers Using FCM Clustering Method [Volume 4, Issue 2, 2016, Pages 83-91]
Tavanaie, Mohammad Ali An Investigation of Structural-Mechanical Properties of Spun-Bonded Non-Woven Using Computer Vision Method [Volume 7, Issue 1, 2019, Pages 3-13]
Tavanaie, Mohammad Ali Study on Physical Properties of Poly(ethylene terephthalate) Bi-shrinkage Yarns [Volume 8, Issue 2, 2020, Pages 1-14]
Tavanaie, Mohammad Ali Study on Linear Density Effect on the Vibration Behavior of Textile Strings Using Video Processing [Volume 8, Issue 2, 2020, Pages 41-51]
Tavanaie, Mohammad Ali Modeling and Optimization of Mass and Spring Based Vibration String Using Modal Analysis and Imperialist Competition Optimization Algorithm Methods [Volume 9, Issue 2, 2021, Pages 43-56]
Tayebi, Habib-Allah Synthesis of Graphene/Zinc Stannate Nanocomposite on Cotton Fabric to Obtain Multi-Functional Properties [Volume 10, Issue 4, 2022, Pages 45-59]
Tehrani, Majid Evaluation of the Effect of Mordant Types and Dyeing Methods on the Color Properties of Viscose Lycra Fabric Dyed with Hibiscus Sabdariffa Calyces [Volume 10, Issue 4, 2022, Pages 61-73]
Tehrani, Majid Investigating the effect of various extraction solvents on the colorimetric and fastness properties of silk fabrics dyed with spent coffee grounds as the natural colorant [Volume 11, Issue 4, 2023, Pages 12-21]
Tehrani Dehkordi, Majid An Analytical Study of Initial Shear Behavior of Plain Woven Hybrid Fabrics [Volume 4, Issue 1, 2015, Pages 9-14]
Tehrani Dehkordi, Majid Meso-scale Modeling of Tension Analysis of Pure and Intra-ply Hybrid Woven Composites Using Finite Element Method [Volume 3, Issue 2, 2015, Pages 76-85]
Tehrani-Dehkordi, Majid An Analytical Study of Initial Shear Behavior of Plain Woven Hybrid Fabrics [Volume 4, Issue 1, 2015, Pages 9-14]
Tehrani-Dehkordi, Majid Study on Bending Damage of Intra-Ply Basalt/Nylon Hybrid Composites [Volume 6, Issue 2, 2018, Pages 59-66]
Tehrani-Dehkordi, Majid Tensile behavior simulation of woven fabric with different weave pattern based on finite element method [Volume 3, Issue 1, 2015, Pages 38-43]
Tehrani-Dehkordi, Nadia Applying Fuzzy Logic Model for Static Puncture Evaluation of Nonwoven Needle-Punched Polyester Fabrics [Volume 10, Issue 1, 2022, Pages 31-39]
Tehrani-Dehkordi, Nadia A Review on the Compression Properties and Feet Feeling Comfort of Hand-Knotted Carpet [Volume 10, Issue 4, 2022, Pages 75-101]
V
Vadood, Morteza Modeling the Properties of Core-Compact Spun Yarn Using Artificial Neural Network [Volume 4, Issue 2, 2016, Pages 101-105]
Vadood, Morteza Simulation of cake formation for nano-fibrous filter media using image processing [Volume 2, Issue 1, 2014, Pages 5-10]
Vadood, Morteza Development of Resizing Software for Paper Patterns [Volume 9, Issue 2, 2021, Pages 80-71]
Vadood, Morteza Effective Parameters, Modeling, and Materials in Sound Absorption: A Review [Volume 10, Issue 1, 2022, Pages 3-21]
Vadood, Morteza Investigation and Modeling the Effect of Different Filler Materials on the Sound Absorption Properties of Double Base Persian Rugs [Volume 10, Issue 2, 2022, Pages 65-77]
Valipour, Peiman Synthesis of Graphene/Zinc Stannate Nanocomposite on Cotton Fabric to Obtain Multi-Functional Properties [Volume 10, Issue 4, 2022, Pages 45-59]
Valipouri, Afsanef Numerical study on the jet dynamic through centrifuge spinning: influence of angular velocity [Volume 3, Issue 1, 2015, Pages 24-29]
Valipouri, Afsaneh Fabrication of Biodegradable PCL Particles as well as PA66 Nanofibers via Air-Sealed Centrifuge Electrospinning (ASCES) [Volume 4, Issue 1, 2015, Pages 15-19]
Valipouri, Afsaneh Production Scale Up of Nanofibers: A Review [Volume 5, Issue 1, 2017, Pages 8-16]
Valipouri, Afsaneh Investigating Moisture Management Property of a Bi-layer Fabric Through Nanofiber-coated PET as a Novel Sewing Thread: Vertical Wicking Test [Volume 6, Issue 1, 2018, Pages 23-30]
Valizadeh, Masoumeh Recent advances in electrospinning of some selected biopolymers (pages 70 to 78) [Volume 1, Issue 2, 2013, Pages 70-78]
Varsei, Mehdi Providing a New Method for Evaluating the Nip Stability in Intermingled Yarn [Volume 10, Issue 1, 2022, Pages 23-30]
Vatanara, Alireza Straightforward and highly-efficient feather keratin extraction by systematic optimization of sodium sulfide treatment process [Volume 11, Issue 1, 2023, Pages 57-67]
Veysian, Seyyed Mohammad Degumming of silk yarn using alkali, enzyme and seidlitzia rosmarinus [Volume 1, Issue 2, 2013, Pages 60-64]
Walle, Gashaw Ashagre Overview of Ethiopian Textile Industry [Volume 6, Issue 2, 2018, Pages 117-120]
Warnet, Laurent Enhancement of composite performance by hollow polyester fibers [Volume 2, Issue 2, 2014, Pages 5-10]
Y
Yazdanshenas, Mohammad Esmaeel Evaluation of the fabric formability by concentrated loading method [Volume 2, Issue 2, 2014, Pages 16-19]
Yazdanshenas, Mohammad Esmail The effect of the structural characteristics of plain knitted fabrics on the sound absorption coefficient: in single-layer and multi-layer [Volume 11, Issue 2, 2023, Pages 49-59]
Yegani, Reza Investigating the Effect of Various Oxidizing Agents on the Surface Functionalization of Microporous Polypropylene Membranes [Volume 4, Issue 2, 2016, Pages 92-100]
Yegani, Reza Experimental design applied to fabrication of PSF membranes via NIP's method Part2:Influential parameters on pure water permeability and selection criteria for optimum membrane in MF process [Volume 2, Issue 1, 2014, Pages 31-37]
Yegani, Reza Central composite experimental design applied to fabrication of LLDPE microporous membrane via thermally induced phase separation (TIPS) method [Volume 1, Issue 2, 2013, Pages 85-90]
Yegani, Reza Experimental design applied to fabrication of PSf membranes via NIPS method Part1: Influential parameters on membrane porosity and mechanical strength [Volume 1, Issue 1, 2013, Pages 24-30]
Yekta, Ali Preparation and characterization of wet spun fibers based on TPU/PVDF/CNT [Volume 12, Issue 2, 2024]
Yousefi, Sanaz Effect of Fabric Structure on the Tensile Stress Relaxation of Net Warp Knitted Fabrics [Volume 8, Issue 2, 2020, Pages 65-73]
Z
Zadhoush, Ali Fabrication and Characterization of Electrospun Wool Nanoparticles/Nylon 6 Composite Nanofiber Yarn [Volume 10, Issue 1, 2022, Pages 65-78]
Zadhoush, Ali Effects of Fibrous Layer Structure on Tensile Behavior and Fracture Toughness of E-Glass/Epoxy Composites: A Comparison Between Angle Plied and Woven Layers [Volume 12, Issue 1, 2024]
Zamani, Fatemeh Comparison of Structural Modification and Argon Plasma Treatment of Poly(lactide-co-glycolic acid) Nanofibrous Scaffolds for Cell Culture [Volume 8, Issue 2, 2020, Pages 33-40]
Zare Bidoki, Farzaneh An Overview of Protective Gloves with Regards to Hand Performance and the Evaluation Methods [Volume 9, Issue 3, 2021, Pages 3-20]
Zarrebini, Mohammad The Influence of Fiber Crimp on Acoustic Performance of Polypropylene Fibrous Batt [Volume 3, Issue 2, 2015, Pages 71-75]
Zarrebini, Mohammad Mechanical Properties of Needle-Punched Fabrics in Relation to Fiber Orientation [Volume 5, Issue 1, 2017, Pages 48-55]
Zarrebini, Mohammad Prediction of random-velour needle punching force using artificial neural network [Volume 1, Issue 2, 2013, Pages 91-97]
Zeidaabadi Nezhad, Abolghasem Introducing a Method for Evaluating Fabric Performance against Human Body Thermal Radiation [Volume 12, Issue 1, 2024]
Zeighami, Fatemeh Multi-dimensional Analytical Base Method for Evaluating Camouflage Patterns [Volume 9, Issue 3, 2021, Pages 21-28]
Zeinal Hamadani, Ali Modeling and cost minimization of weigh reduction of a polyethylene terephthalate fabric bu sodium hydroxide [Volume 2, Issue 1, 2014, Pages 21-25]
Zeini, Masaood Investigations on the Reinforcement of Mechanical Properties of Gypsum Composites Containing E-glass Woven Fabrics [Volume 4, Issue 1, 2015, Pages 20-26]
Zeynivand Mojarrad, Maryam Experimental study on the effect of braiding angle on the fracture behavior of 2D braided composite cylinders [Volume 11, Issue 3, 2023, Pages 11-17]
Zeynivand Mojarrad, Maryam A Review on the Self-Healing Property of Core-Sheath Nanofibers: Applications and Recent Advances [Volume 12, Issue 3, 2024]
Zielińska, Dorota Quaternary Ammonium Salts of Poly(N,N-dimethylaminoethyl methacrylate) as an Efficient Antibacterial Agent for Polylactide Textiles [Volume 7, Issue 2, 2019, Pages 65-72]
Journal of Textiles and Polymers