Journal of Textiles and Polymers

Keyword Index

A

ABAQUS software Investigation of The effect of E-glass/carbon hybridization on the buckling behavior of woven fabric reinforced composite laminates [Volume 12, Issue 1, 2024]
Abrasion Evaluation of Floorcovering Abrasion Resistance by Means of Image Processing Technique [Volume 3, Issue 2, 2015, Pages 40-45]
Absorbed Energy New Approach to characterize low-velocity impact behavior of sandwich-structured composite reinforced with weft-knitted spacer fabric [Volume 10, Issue 3, 2022, Pages 35-41]
Acid dye Design of Dye Adsorption by Amine Terminated Dendritic Functionalized Halloysite Nanotubes Using Response Surface Methodology (RSM) [Volume 7, Issue 2, 2019, Pages 25-36]
Acrylic fibers Effect of wet spinning parameters of Acrylic copolymers in DMF- H2O on the physical and mechanical properties of fibers obtained [Volume 12, Issue 4, 2024]
Ag Fabrication and characterization of PCL nanofibrous networks containing ZnO and Ag for enhanced antibacterial properties [Volume 12, Issue 1, 2024]
Al2(B4O7)3 Flame-Retardant Cellulosic Fiber Nanocomposite Based on Aluminum Tetraborate and Aluminum Tungstate [Volume 7, Issue 2, 2019, Pages 3-12]
Al2(WO3)3 Flame-Retardant Cellulosic Fiber Nanocomposite Based on Aluminum Tetraborate and Aluminum Tungstate [Volume 7, Issue 2, 2019, Pages 3-12]
Alkaline hydrolysis Electrically and Electrochemically Active Composite Based on Polyester/Reduced Graphene Oxide/Polypyrrole with Remarkable Washing Durability [Volume 8, Issue 2, 2020, Pages 15-22]
Analytical model Experimental and analytical study on tensile strength of short-fiber-reinforced adobe (SFRA) [Volume 11, Issue 3, 2023, Pages 29-38]
Angle Ply Effects of Fibrous Layer Structure on Tensile Behavior and Fracture Toughness of E-Glass/Epoxy Composites: A Comparison Between Angle Plied and Woven Layers [Volume 12, Issue 1, 2024]
Antibacterial Activity Antibacterial properties of PCL-based nanofibers loaded with ZnO nanoparticles synthesized via sol-gel method [Volume 12, Issue 3, 2024]
Antibacterial Activity Synergistic Modification of Cotton Fabric with Polyamidoamine Dendrimer and Cationic Gemini Surfactant for Enhanced Functional Performance [Volume 12, Issue 3, 2024]
Anti-fragility theory Designing an Anti-fragile Supply Chain in the Textile Industry under Conditions of Uncertainty Using the Fuzzy BWM and TOPSIS [Volume 11, Issue 1, 2023, Pages 3-12]
Artificial football turf Effect of the structural components of the third generation of artificial football turf on shock absorption [Volume 11, Issue 1, 2023, Pages 27-34]
Auxetic yarn Modeling Poisson’s Ratio and Tensile Behavior of Auxetic 4-Plied Yarn [Volume 11, Issue 3, 2023, Pages 49-57]

C

California Bearing Ratio (CBR) Role of Geogrid’s Structure on the California Bearing Ratio of the Reinforced Soil [Volume 12, Issue 1, 2024]
Carbon fabric Study on morphological, structural, electrical, and electromagnetic shielding properties of carbon fabric coated with nickel and cobalt by electroplating method [Volume 12, Issue 2, 2024]
Carbon nanotubes Comprehensive Comparison Between Mechanical Properties of Nanofiber Matrix and Single Nanofibers [Volume 7, Issue 2, 2019, Pages 37-46]
Carbon nanotubes (CNTs) Preparation and characterization of wet spun fibers based on TPU/PVDF/CNT [Volume 12, Issue 2, 2024]
Carpet Effective Parameters, Modeling, and Materials in Sound Absorption: A Review [Volume 10, Issue 1, 2022, Pages 3-21]
CATIA Software Simulation of 301 lockstitch at different stitch densities for the prediction of sewing thread consumption [Volume 12, Issue 3, 2024]
Cellulase Statistical Optimization of Durable Multifunctional Properties of Cellulase Cotton Using Nano-TiO2 Sonoloading [Volume 8, Issue 1, 2020, Pages 3-16]
Cement-based composite Flexural Behavior of Concrete-Mortar Composites Reinforced with Net Spacer warp Knitted Fabrics [Volume 12, Issue 4, 2024]
Chicken feather Straightforward and highly-efficient feather keratin extraction by systematic optimization of sodium sulfide treatment process [Volume 11, Issue 1, 2023, Pages 57-67]
Chitosan Chitosan/nanosilver Nanofiber Composites with Enhanced Morphology and Microbiological Properties [Volume 3, Issue 2, 2015, Pages 64-70]
Clindamycin drug Encapsulation of Zeolite/clindamycin drug into PXDDA/PVA nanofibers to investigate drug delivery [Volume 12, Issue 3, 2024]
Co-axial -electrospinning A Review on the Self-Healing Property of Core-Sheath Nanofibers: Applications and Recent Advances [Volume 12, Issue 3, 2024]
Cobalt Study on morphological, structural, electrical, and electromagnetic shielding properties of carbon fabric coated with nickel and cobalt by electroplating method [Volume 12, Issue 2, 2024]
Color Fastness Investigating the effect of various extraction solvents on the colorimetric and fastness properties of silk fabrics dyed with spent coffee grounds as the natural colorant [Volume 11, Issue 4, 2023, Pages 12-21]
Color gamut Influence of Dopant Type on the Color Gamut of a Polypyrrole Electrochromic Layer [Volume 10, Issue 4, 2022, Pages 33-44]
Colorimetric parameters Investigating the effect of various extraction solvents on the colorimetric and fastness properties of silk fabrics dyed with spent coffee grounds as the natural colorant [Volume 11, Issue 4, 2023, Pages 12-21]
Color properties Evaluation of the Effect of Mordant Types and Dyeing Methods on the Color Properties of Viscose Lycra Fabric Dyed with Hibiscus Sabdariffa Calyces [Volume 10, Issue 4, 2022, Pages 61-73]
Comfort Effect of Number and Position of Tuck Stitches in the Pattern Repeat on the Quality of Rib Weft-Knitted Fabrics from the Point of Comfort [Volume 11, Issue 3, 2023, Pages 39-48]
Composite Meso-scale Modeling of Tension Analysis of Pure and Intra-ply Hybrid Woven Composites Using Finite Element Method [Volume 3, Issue 2, 2015, Pages 76-85]
Composite Edgewise Compression Behavior of Three-Dimensional Integrated Woven Sandwich Composite Panels [Volume 8, Issue 2, 2020, Pages 53-63]
Composite Effective Parameters, Modeling, and Materials in Sound Absorption: A Review [Volume 10, Issue 1, 2022, Pages 3-21]
Composite Reinforcement of Cement Mortar with Waste Cotton Fluff Fiber [Volume 11, Issue 1, 2023, Pages 35-41]
Composite materials A Review on the Self-Healing Property of Core-Sheath Nanofibers: Applications and Recent Advances [Volume 12, Issue 3, 2024]
Composite nanofibers Comprehensive Comparison Between Mechanical Properties of Nanofiber Matrix and Single Nanofibers [Volume 7, Issue 2, 2019, Pages 37-46]
Compressive strength Reinforcement of Cement Mortar with Waste Cotton Fluff Fiber [Volume 11, Issue 1, 2023, Pages 35-41]
Concrete Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method [Volume 11, Issue 3, 2023, Pages 19-27]
Consumer Behavior Effective Factors in Changing the Buying Behavior of Iranian Apparel Consumers [Volume 8, Issue 1, 2020, Pages 65-74]
Continuous fiber reinforced thermoset composites 3D printing of thermoset composite reinforced with continuous fibers and evaluation of its mechanical properties [Volume 11, Issue 4, 2023, Pages 3-11]
Corrosion protection A Review on the Self-Healing Property of Core-Sheath Nanofibers: Applications and Recent Advances [Volume 12, Issue 3, 2024]
Cotton fluff fiber Reinforcement of Cement Mortar with Waste Cotton Fluff Fiber [Volume 11, Issue 1, 2023, Pages 35-41]
Crimp The Influence of Fiber Crimp on Acoustic Performance of Polypropylene Fibrous Batt [Volume 3, Issue 2, 2015, Pages 71-75]
Cross-Linking Investigation of the effect of polyamidoamine on the final properties of polyvinyl alcohol-based hydrogels [Volume 12, Issue 2, 2024]
Cure characteristics Effects of Zinc Stearate Replacement and Zinc Oxide/Zinc Stearate Ratio on Rheological Properties and Curing Characteristics of Carbon Black-Filled Rubbers [Volume 12, Issue 1, 2024]

E

Elastic properties Comparison of structural specifications and elastic properties of Iranian medical bandages [Volume 10, Issue 4, 2022, Pages 103-115]
Electrical conductivity Synthesis of Graphene/Zinc Stannate Nanocomposite on Cotton Fabric to Obtain Multi-Functional Properties [Volume 10, Issue 4, 2022, Pages 45-59]
Electroplating Study on morphological, structural, electrical, and electromagnetic shielding properties of carbon fabric coated with nickel and cobalt by electroplating method [Volume 12, Issue 2, 2024]
Electrospinning Chitosan/nanosilver Nanofiber Composites with Enhanced Morphology and Microbiological Properties [Volume 3, Issue 2, 2015, Pages 64-70]
Electrospinning How Porous Nanofibers Have Enhanced the Engineering of Advanced Materials: A Review [Volume 5, Issue 2, 2017, Pages 3-21]
Electrospinning Fuzzy VIKOR Optimization for Designing High Performance Hydroxyapatite/Polycaprolactone Scaffolds for Hard Tissue Engineering [Volume 8, Issue 1, 2020, Pages 17-36]
Electrospinning Fabrication and Characterization of Electrospun Wool Nanoparticles/Nylon 6 Composite Nanofiber Yarn [Volume 10, Issue 1, 2022, Pages 65-78]
Electrospinning Investigation of the Possibility of Generating Electric Current from PVDF/PU Polymer Alloy Layer under Cyclic Tensile Loading [Volume 10, Issue 4, 2022, Pages 21-32]
Electrospinning An overview of synthetic microfibers: fabrication, properties, applications and environmental problems [Volume 11, Issue 2, 2023, Pages 29-47]
Electrospinning Fabrication and characterization of PCL nanofibrous networks containing ZnO and Ag for enhanced antibacterial properties [Volume 12, Issue 1, 2024]
Electrospinning Antibacterial properties of PCL-based nanofibers loaded with ZnO nanoparticles synthesized via sol-gel method [Volume 12, Issue 3, 2024]
EMI shielding Study on morphological, structural, electrical, and electromagnetic shielding properties of carbon fabric coated with nickel and cobalt by electroplating method [Volume 12, Issue 2, 2024]
Energy harvesting Investigation of the Possibility of Generating Electric Current from PVDF/PU Polymer Alloy Layer under Cyclic Tensile Loading [Volume 10, Issue 4, 2022, Pages 21-32]
Epoxy composite Effects of Fibrous Layer Structure on Tensile Behavior and Fracture Toughness of E-Glass/Epoxy Composites: A Comparison Between Angle Plied and Woven Layers [Volume 12, Issue 1, 2024]
Equilibrium equations Flexural Behavior of Concrete-Mortar Composites Reinforced with Net Spacer warp Knitted Fabrics [Volume 12, Issue 4, 2024]
Extraction solvent Investigating the effect of various extraction solvents on the colorimetric and fastness properties of silk fabrics dyed with spent coffee grounds as the natural colorant [Volume 11, Issue 4, 2023, Pages 12-21]

F

Fabric properties The effect of loom parameters on some properties of woven fabrics [Volume 11, Issue 4, 2023, Pages 43-53]
Fabric Structure Effect of Fabric Structure on the Tensile Stress Relaxation of Net Warp Knitted Fabrics [Volume 8, Issue 2, 2020, Pages 65-73]
Fabric Structure Effect of Number and Position of Tuck Stitches in the Pattern Repeat on the Quality of Rib Weft-Knitted Fabrics from the Point of Comfort [Volume 11, Issue 3, 2023, Pages 39-48]
Fabric Structure Role of Geogrid’s Structure on the California Bearing Ratio of the Reinforced Soil [Volume 12, Issue 1, 2024]
Factor analysis Effective Factors in Changing the Buying Behavior of Iranian Apparel Consumers [Volume 8, Issue 1, 2020, Pages 65-74]
Feet Feeling Comfort A Review on the Compression Properties and Feet Feeling Comfort of Hand-Knotted Carpet [Volume 10, Issue 4, 2022, Pages 75-101]
FE simulation Modeling the geometry and simulating the low-velocity impact behavior of foam-based composite reinforced with warp-knitted spacer fabric [Volume 11, Issue 1, 2023, Pages 43-55]
Fiber Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method [Volume 11, Issue 3, 2023, Pages 19-27]
Filter Effect of Woven Fabric Structure on the Water Filtration Efficiency [Volume 10, Issue 2, 2022, Pages 64-49]
Finishing Application of Oligomers with Urea Linkage as Flame Retardant and Antibacterial Materials in Jute Fabric [Volume 8, Issue 2, 2020, Pages 23-32]
Finite element method Meso-scale Modeling of Tension Analysis of Pure and Intra-ply Hybrid Woven Composites Using Finite Element Method [Volume 3, Issue 2, 2015, Pages 76-85]
Flame retardant Application of Oligomers with Urea Linkage as Flame Retardant and Antibacterial Materials in Jute Fabric [Volume 8, Issue 2, 2020, Pages 23-32]
Fluconazole Comparison of the Anti-Fungal Effect of Electro-Spinning Drug-Loaded Nano-Fibers and Pad Dry Drug-Loaded Fabrics [Volume 8, Issue 1, 2020, Pages 37-42]
Fracture toughness Effects of Fibrous Layer Structure on Tensile Behavior and Fracture Toughness of E-Glass/Epoxy Composites: A Comparison Between Angle Plied and Woven Layers [Volume 12, Issue 1, 2024]
Fuzzy BWM Designing an Anti-fragile Supply Chain in the Textile Industry under Conditions of Uncertainty Using the Fuzzy BWM and TOPSIS [Volume 11, Issue 1, 2023, Pages 3-12]
Fuzzy logic Applying Fuzzy Logic Model for Bending Rigidity Evaluation of Woven Fabrics [Volume 7, Issue 1, 2019, Pages 61-68]
Fuzzy logic Applying Fuzzy Logic Model for Static Puncture Evaluation of Nonwoven Needle-Punched Polyester Fabrics [Volume 10, Issue 1, 2022, Pages 31-39]
Fuzzy modeling Fuzzy VIKOR Optimization for Designing High Performance Hydroxyapatite/Polycaprolactone Scaffolds for Hard Tissue Engineering [Volume 8, Issue 1, 2020, Pages 17-36]

H

Halloysite nanotubes Effect of APTES-Halloysite Nanotubes on the Release Characteristic of Cellulose Acetate/Curcumin Film [Volume 10, Issue 3, 2022, Pages 23-34]
Hand-Knotted carpet A Review on the Compression Properties and Feet Feeling Comfort of Hand-Knotted Carpet [Volume 10, Issue 4, 2022, Pages 75-101]
Hard Tissue Engineering Fuzzy VIKOR Optimization for Designing High Performance Hydroxyapatite/Polycaprolactone Scaffolds for Hard Tissue Engineering [Volume 8, Issue 1, 2020, Pages 17-36]
Heat treatment The Consequences of Temperature on the Shrinkage Properties of Cotton Spandex Woven Fabric [Volume 7, Issue 1, 2019, Pages 25-29]
Hibiscus sabdariffa Evaluation of the Effect of Mordant Types and Dyeing Methods on the Color Properties of Viscose Lycra Fabric Dyed with Hibiscus Sabdariffa Calyces [Volume 10, Issue 4, 2022, Pages 61-73]
Hybrid An Analytical Study of Initial Shear Behavior of Plain Woven Hybrid Fabrics [Volume 4, Issue 1, 2016, Pages 9-14]
Hybrid Composites Investigation of The effect of E-glass/carbon hybridization on the buckling behavior of woven fabric reinforced composite laminates [Volume 12, Issue 1, 2024]
Hydrogel Investigation of the effect of polyamidoamine on the final properties of polyvinyl alcohol-based hydrogels [Volume 12, Issue 2, 2024]
Hydrophilicity Comparison of Structural Modiﬁcation and Argon Plasma Treatment of Poly(lactide-co-glycolic acid) Nanofibrous Scaffolds for Cell Culture [Volume 8, Issue 2, 2020, Pages 33-40]
Hydroxyapatite (HA) Porous nanocomposite scaffolds prepared from gelatin and hydroxyapatite for bone tissue engineering: direct mixing and biomimetic [Volume 11, Issue 1, 2023, Pages 13-26]

M

Madder Application of Response Surface Methodology for Modeling the Color Strength of Natural Hair Colorant [Volume 7, Issue 1, 2019, Pages 15-23]
Mechanical Modeling Modeling Poisson’s Ratio and Tensile Behavior of Auxetic 4-Plied Yarn [Volume 11, Issue 3, 2023, Pages 49-57]
Mechanical properties Investigations on the Reinforcement of Mechanical Properties of Gypsum Composites Containing E-glass Woven Fabrics [Volume 4, Issue 1, 2016, Pages 20-26]
Mechanical properties A Review on the Poisson’s Ratio of Fabrics [Volume 8, Issue 1, 2020, Pages 53-63]
Mechanical Property Comprehensive Comparison Between Mechanical Properties of Nanofiber Matrix and Single Nanofibers [Volume 7, Issue 2, 2019, Pages 37-46]
Mechanical testing 3D printing of thermoset composite reinforced with continuous fibers and evaluation of its mechanical properties [Volume 11, Issue 4, 2023, Pages 3-11]
Medical bandage Comparison of structural specifications and elastic properties of Iranian medical bandages [Volume 10, Issue 4, 2022, Pages 103-115]
Mesoscale modeling Meso-scale Modeling of Tension Analysis of Pure and Intra-ply Hybrid Woven Composites Using Finite Element Method [Volume 3, Issue 2, 2015, Pages 76-85]
Metal mordants Evaluation of the Effect of Mordant Types and Dyeing Methods on the Color Properties of Viscose Lycra Fabric Dyed with Hibiscus Sabdariffa Calyces [Volume 10, Issue 4, 2022, Pages 61-73]
Modeling Application of Response Surface Methodology for Modeling the Color Strength of Natural Hair Colorant [Volume 7, Issue 1, 2019, Pages 15-23]
Modification Effect of APTES-Halloysite Nanotubes on the Release Characteristic of Cellulose Acetate/Curcumin Film [Volume 10, Issue 3, 2022, Pages 23-34]
Multilayer composite Improvement of tensile strength of glass/epoxy multilayer composites by addition of short glass fibers [Volume 11, Issue 4, 2023, Pages 22-30]
Multi-wall carbon nanotubes Investigation of the Effects of Graphene Oxide Nanoparticles and Multi-Wall Carbon Nanotubes on Conductivity and Surface Morphology of Polyester-Viscose Fabric [Volume 7, Issue 2, 2019, Pages 13-24]

N

Nanocomposite Flame-Retardant Cellulosic Fiber Nanocomposite Based on Aluminum Tetraborate and Aluminum Tungstate [Volume 7, Issue 2, 2019, Pages 3-12]
Nanocomposite Porous nanocomposite scaffolds prepared from gelatin and hydroxyapatite for bone tissue engineering: direct mixing and biomimetic [Volume 11, Issue 1, 2023, Pages 13-26]
Nanofiber Chitosan/nanosilver Nanofiber Composites with Enhanced Morphology and Microbiological Properties [Volume 3, Issue 2, 2015, Pages 64-70]
Nanofiber Poly(lactic acid) (PLA) Nanofibers for Bone Tissue Engineering [Volume 7, Issue 2, 2019, Pages 47-64]
Nano-fibers Comparison of the Anti-Fungal Effect of Electro-Spinning Drug-Loaded Nano-Fibers and Pad Dry Drug-Loaded Fabrics [Volume 8, Issue 1, 2020, Pages 37-42]
Nanofibers How Porous Nanofibers Have Enhanced the Engineering of Advanced Materials: A Review [Volume 5, Issue 2, 2017, Pages 3-21]
Nanofibers Fabrication and Characterization of Electrospun Wool Nanoparticles/Nylon 6 Composite Nanofiber Yarn [Volume 10, Issue 1, 2022, Pages 65-78]
Nanofibers Encapsulation of Zeolite/clindamycin drug into PXDDA/PVA nanofibers to investigate drug delivery [Volume 12, Issue 3, 2024]
Nanofibers Preparation, characterization, and antibacterial properties of PVA/gelatin/ sodium alginate/ silver nanofibers [Volume 13, Issue 1, 2025]
Nanofiber yarn Production and Characterization of PVDF/MWCNT Core-Shell Hybrid Nanofiber Yarns via Nozzle-less Disc Electrospinning Method [Volume 12, Issue 2, 2024]
Nano zinc oxide A Study on ZnO Nanorod Arrays Formed on the Surface of Polyester Fabric [Volume 4, Issue 2, 2016, Pages 53-59]
Natural colorant Application of Response Surface Methodology for Modeling the Color Strength of Natural Hair Colorant [Volume 7, Issue 1, 2019, Pages 15-23]
Natural colorant Evaluation of the Effect of Mordant Types and Dyeing Methods on the Color Properties of Viscose Lycra Fabric Dyed with Hibiscus Sabdariffa Calyces [Volume 10, Issue 4, 2022, Pages 61-73]
N-dimethylaminoethyl methacrylate) Quaternary Ammonium Salts of Poly(N,N-dimethylaminoethyl methacrylate) as an Efficient Antibacterial Agent for Polylactide Textiles [Volume 7, Issue 2, 2019, Pages 65-72]
Nip Stability Providing a New Method for Evaluating the Nip Stability in Intermingled Yarn [Volume 10, Issue 1, 2022, Pages 23-30]
Nip Structure Providing a New Method for Evaluating the Nip Stability in Intermingled Yarn [Volume 10, Issue 1, 2022, Pages 23-30]
Nozzle-less electrospinning Production and Characterization of PVDF/MWCNT Core-Shell Hybrid Nanofiber Yarns via Nozzle-less Disc Electrospinning Method [Volume 12, Issue 2, 2024]
Nylon 6 Fabrication and Characterization of Electrospun Wool Nanoparticles/Nylon 6 Composite Nanofiber Yarn [Volume 10, Issue 1, 2022, Pages 65-78]

P

PCL Fabrication and characterization of PCL nanofibrous networks containing ZnO and Ag for enhanced antibacterial properties [Volume 12, Issue 1, 2024]
PCL/HA scaffold Fuzzy VIKOR Optimization for Designing High Performance Hydroxyapatite/Polycaprolactone Scaffolds for Hard Tissue Engineering [Volume 8, Issue 1, 2020, Pages 17-36]
PET-PLA copolyester Investigating of Transesterification and Properties of Polyethylene Terephthalate/Polylactic Acid Blend Film [Volume 11, Issue 2, 2023, Pages 15-3]
Photocatalytic activity Synthesis of Graphene/Zinc Stannate Nanocomposite on Cotton Fabric to Obtain Multi-Functional Properties [Volume 10, Issue 4, 2022, Pages 45-59]
Physicochemical properties Characterizing Physicochemical Properties of Enset Starch [Volume 8, Issue 1, 2020, Pages 43-52]
Poisson&rsquo Theoretical Study on the Poisson’s Ratio of Tubular Braid’s Structure Considering Different Structural Deformation Regimes [Volume 12, Issue 3, 2024]
Poisson’s ratio A Review on the Poisson’s Ratio of Fabrics [Volume 8, Issue 1, 2020, Pages 53-63]
Poisson’s ratio Modeling Poisson’s Ratio and Tensile Behavior of Auxetic 4-Plied Yarn [Volume 11, Issue 3, 2023, Pages 49-57]
Poly (amidoamine) dendrimer (PAMAM) Synergistic Modification of Cotton Fabric with Polyamidoamine Dendrimer and Cationic Gemini Surfactant for Enhanced Functional Performance [Volume 12, Issue 3, 2024]
Polyester/cotton yarn, knitted fabric, finite element method Investigation into the Curling Intensity of Polyester/Cotton Single Jersey Weft Knitted fabric Using Finite Element Method [Volume 3, Issue 2, 2015, Pages 86-90]
Polyether sulfone Polyethersulfone/Polyvinyl Alcohol-Zeolite Conjugate Electrospinning for Biomedical Applications [Volume 10, Issue 2, 2022, Pages 47-31]
Polyethylene terephthalate Investigating of Transesterification and Properties of Polyethylene Terephthalate/Polylactic Acid Blend Film [Volume 11, Issue 2, 2023, Pages 15-3]
Polypyrrole Electrically and Electrochemically Active Composite Based on Polyester/Reduced Graphene Oxide/Polypyrrole with Remarkable Washing Durability [Volume 8, Issue 2, 2020, Pages 15-22]
Polyurethane Preparation and characterization of wet spun fibers based on TPU/PVDF/CNT [Volume 12, Issue 2, 2024]
Polyurethane Foam The flexural behavior of Stitched Polyurethane Foam Composite Sandwich Structures [Volume 11, Issue 3, 2023, Pages 3-10]
Polyvinylidene Fluoride (PVDF) Preparation and characterization of wet spun fibers based on TPU/PVDF/CNT [Volume 12, Issue 2, 2024]
Poly (xylitol-co-dodecanedioic acid) (PXDDA) Encapsulation of Zeolite/clindamycin drug into PXDDA/PVA nanofibers to investigate drug delivery [Volume 12, Issue 3, 2024]
Porosity Percentage The effect of the structural characteristics of plain knitted fabrics on the sound absorption coefficient: in single-layer and multi-layer [Volume 11, Issue 2, 2023, Pages 49-59]
Porous scaffold Porous nanocomposite scaffolds prepared from gelatin and hydroxyapatite for bone tissue engineering: direct mixing and biomimetic [Volume 11, Issue 1, 2023, Pages 13-26]
Precision Investigating the correlation between precision and trueness of spectrophotometers in measuring the whiteness index and tint factor of none fluorescence white ceramic [Volume 11, Issue 2, 2023, Pages 27-17]
PVDF/MWCNT composite Production and Characterization of PVDF/MWCNT Core-Shell Hybrid Nanofiber Yarns via Nozzle-less Disc Electrospinning Method [Volume 12, Issue 2, 2024]
PVDF/PU elastic polymer alloy Investigation of the Possibility of Generating Electric Current from PVDF/PU Polymer Alloy Layer under Cyclic Tensile Loading [Volume 10, Issue 4, 2022, Pages 21-32]

R

Recovery A Review on the Compression Properties and Feet Feeling Comfort of Hand-Knotted Carpet [Volume 10, Issue 4, 2022, Pages 75-101]
Recycling Face Masks: From the Coronavirus Crisis and Environmental Challenges to Recycling Opportunities [Volume 12, Issue 2, 2024]
Reduced graphene Oxide Electrically and Electrochemically Active Composite Based on Polyester/Reduced Graphene Oxide/Polypyrrole with Remarkable Washing Durability [Volume 8, Issue 2, 2020, Pages 15-22]
Reflectance spectrophotometer Investigating the correlation between precision and trueness of spectrophotometers in measuring the whiteness index and tint factor of none fluorescence white ceramic [Volume 11, Issue 2, 2023, Pages 27-17]
Reinforcement Investigations on the Reinforcement of Mechanical Properties of Gypsum Composites Containing E-glass Woven Fabrics [Volume 4, Issue 1, 2016, Pages 20-26]
Reinforcement Reinforcement of Cement Mortar with Waste Cotton Fluff Fiber [Volume 11, Issue 1, 2023, Pages 35-41]
Removal Design of Dye Adsorption by Amine Terminated Dendritic Functionalized Halloysite Nanotubes Using Response Surface Methodology (RSM) [Volume 7, Issue 2, 2019, Pages 25-36]
Response Surface Methodology Application of Response Surface Methodology for Modeling the Color Strength of Natural Hair Colorant [Volume 7, Issue 1, 2019, Pages 15-23]
Response Surface Methodology Design of Dye Adsorption by Amine Terminated Dendritic Functionalized Halloysite Nanotubes Using Response Surface Methodology (RSM) [Volume 7, Issue 2, 2019, Pages 25-36]
Response Surface Methodology Statistical Optimization of Durable Multifunctional Properties of Cellulase Cotton Using Nano-TiO2 Sonoloading [Volume 8, Issue 1, 2020, Pages 3-16]
Response Surface Methodology Straightforward and highly-efficient feather keratin extraction by systematic optimization of sodium sulfide treatment process [Volume 11, Issue 1, 2023, Pages 57-67]
Rubber Compound Effects of Zinc Stearate Replacement and Zinc Oxide/Zinc Stearate Ratio on Rheological Properties and Curing Characteristics of Carbon Black-Filled Rubbers [Volume 12, Issue 1, 2024]
Rule of mixtures Experimental and analytical study on tensile strength of short-fiber-reinforced adobe (SFRA) [Volume 11, Issue 3, 2023, Pages 29-38]

S

Sandwich composites The flexural behavior of Stitched Polyurethane Foam Composite Sandwich Structures [Volume 11, Issue 3, 2023, Pages 3-10]
Sandwich Panel Edgewise Compression Behavior of Three-Dimensional Integrated Woven Sandwich Composite Panels [Volume 8, Issue 2, 2020, Pages 53-63]
Scaffold Poly(lactic acid) (PLA) Nanofibers for Bone Tissue Engineering [Volume 7, Issue 2, 2019, Pages 47-64]
Scattering parameters Introducing a Method for Evaluating Fabric Performance against Human Body Thermal Radiation [Volume 12, Issue 1, 2024]
SEM/FTIR characterization Production and Characterization of PVDF/MWCNT Core-Shell Hybrid Nanofiber Yarns via Nozzle-less Disc Electrospinning Method [Volume 12, Issue 2, 2024]
Sewing Thread Consumption Simulation of 301 lockstitch at different stitch densities for the prediction of sewing thread consumption [Volume 12, Issue 3, 2024]
Shear properties Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method [Volume 11, Issue 3, 2023, Pages 19-27]
Short-fiber reinforced adobe (SFRA) Experimental and analytical study on tensile strength of short-fiber-reinforced adobe (SFRA) [Volume 11, Issue 3, 2023, Pages 29-38]
Silver nanoparticles Inkjet-Fabricated Capacitors on Paper and Textile Fabrics [Volume 7, Issue 1, 2019, Pages 45-52]
Simulation Simulation of 301 lockstitch at different stitch densities for the prediction of sewing thread consumption [Volume 12, Issue 3, 2024]
Sodium Alginate Preparation, characterization, and antibacterial properties of PVA/gelatin/ sodium alginate/ silver nanofibers [Volume 13, Issue 1, 2025]
Sodium Sulfide treatment Straightforward and highly-efficient feather keratin extraction by systematic optimization of sodium sulfide treatment process [Volume 11, Issue 1, 2023, Pages 57-67]
Sound Absorption Coefficient Investigation and Modeling the Effect of Different Filler Materials on the Sound Absorption Properties of Double Base Persian Rugs [Volume 10, Issue 2, 2022, Pages 65-77]
Sound Absorption Coefficient The effect of the structural characteristics of plain knitted fabrics on the sound absorption coefficient: in single-layer and multi-layer [Volume 11, Issue 2, 2023, Pages 49-59]
Spacer warp knitted fabric Flexural Behavior of Concrete-Mortar Composites Reinforced with Net Spacer warp Knitted Fabrics [Volume 12, Issue 4, 2024]
Spectroelectrochemistry Influence of Dopant Type on the Color Gamut of a Polypyrrole Electrochromic Layer [Volume 10, Issue 4, 2022, Pages 33-44]
Spent coffee ground Investigating the effect of various extraction solvents on the colorimetric and fastness properties of silk fabrics dyed with spent coffee grounds as the natural colorant [Volume 11, Issue 4, 2023, Pages 12-21]
Stabilization Thermal Analysis of Acrylonitrile/Acrylic Acid Copolymer Dendrigrafted with Citric Acid [Volume 4, Issue 1, 2016, Pages 27-36]
Starch Innovative Method for Demineralization of Cellulosic Substrates via Morpholinium Hydrogen Sulfate [Volume 10, Issue 3, 2022, Pages 3-12]
Stearic acid Effects of Zinc Stearate Replacement and Zinc Oxide/Zinc Stearate Ratio on Rheological Properties and Curing Characteristics of Carbon Black-Filled Rubbers [Volume 12, Issue 1, 2024]
Stitch Density The effect of tensile cyclic forces on the tensile properties of seams with different stitch density of knitted fabrics [Volume 12, Issue 2, 2024]
Stitch Density Simulation of 301 lockstitch at different stitch densities for the prediction of sewing thread consumption [Volume 12, Issue 3, 2024]
Stitching The flexural behavior of Stitched Polyurethane Foam Composite Sandwich Structures [Volume 11, Issue 3, 2023, Pages 3-10]
Strength Behavior Analysis of the Nonwoven Needle-Punched Polyester Fabrics Due to Compression Loading [Volume 7, Issue 1, 2019, Pages 33-43]
Strength Influence of Cover Factor on the Physical Properties of Woven Fabrics [Volume 10, Issue 1, 2022, Pages 57-63]
Structural modification Comparison of Structural Modiﬁcation and Argon Plasma Treatment of Poly(lactide-co-glycolic acid) Nanofibrous Scaffolds for Cell Culture [Volume 8, Issue 2, 2020, Pages 33-40]
Supply Chain anti- fragility Designing an Anti-fragile Supply Chain in the Textile Industry under Conditions of Uncertainty Using the Fuzzy BWM and TOPSIS [Volume 11, Issue 1, 2023, Pages 3-12]
Surface modification Quaternary Ammonium Salts of Poly(N,N-dimethylaminoethyl methacrylate) as an Efficient Antibacterial Agent for Polylactide Textiles [Volume 7, Issue 2, 2019, Pages 65-72]
Surface modification Electrically and Electrochemically Active Composite Based on Polyester/Reduced Graphene Oxide/Polypyrrole with Remarkable Washing Durability [Volume 8, Issue 2, 2020, Pages 15-22]
Surface modification Comparison of Structural Modiﬁcation and Argon Plasma Treatment of Poly(lactide-co-glycolic acid) Nanofibrous Scaffolds for Cell Culture [Volume 8, Issue 2, 2020, Pages 33-40]
Surface modification Synergistic Modification of Cotton Fabric with Polyamidoamine Dendrimer and Cationic Gemini Surfactant for Enhanced Functional Performance [Volume 12, Issue 3, 2024]
Surface tension A Review on Centrifugal and Electro-Centrifugal Spinning as New Methods of Nanofibers Fabrication [Volume 10, Issue 1, 2022, Pages 41-55]
SWOT Analysis Strategies for the Development of Science and Technology of Protective Layers Against Bullets and Fragments [Volume 10, Issue 2, 2022, Pages 15-30]

T

Taguchi Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method [Volume 11, Issue 3, 2023, Pages 19-27]
Tensile Role of Geogrid’s Structure on the California Bearing Ratio of the Reinforced Soil [Volume 12, Issue 1, 2024]
Tensile Behavior Modeling Poisson’s Ratio and Tensile Behavior of Auxetic 4-Plied Yarn [Volume 11, Issue 3, 2023, Pages 49-57]
Tensile cyclic forces The effect of tensile cyclic forces on the tensile properties of seams with different stitch density of knitted fabrics [Volume 12, Issue 2, 2024]
Tensile properties of seams The effect of tensile cyclic forces on the tensile properties of seams with different stitch density of knitted fabrics [Volume 12, Issue 2, 2024]
Textile fibers Experimental and analytical study on tensile strength of short-fiber-reinforced adobe (SFRA) [Volume 11, Issue 3, 2023, Pages 29-38]
Thermal analysis Thermal Analysis of Acrylonitrile/Acrylic Acid Copolymer Dendrigrafted with Citric Acid [Volume 4, Issue 1, 2016, Pages 27-36]
Thermal radiation management Introducing a Method for Evaluating Fabric Performance against Human Body Thermal Radiation [Volume 12, Issue 1, 2024]
Three-point bending test Flexural Behavior of Concrete-Mortar Composites Reinforced with Net Spacer warp Knitted Fabrics [Volume 12, Issue 4, 2024]
TiO2 nanoparticles Statistical Optimization of Durable Multifunctional Properties of Cellulase Cotton Using Nano-TiO2 Sonoloading [Volume 8, Issue 1, 2020, Pages 3-16]
Tissue engineering Poly(lactic acid) (PLA) Nanofibers for Bone Tissue Engineering [Volume 7, Issue 2, 2019, Pages 47-64]
TOPSIS Designing an Anti-fragile Supply Chain in the Textile Industry under Conditions of Uncertainty Using the Fuzzy BWM and TOPSIS [Volume 11, Issue 1, 2023, Pages 3-12]
Transesterification Investigating of Transesterification and Properties of Polyethylene Terephthalate/Polylactic Acid Blend Film [Volume 11, Issue 2, 2023, Pages 15-3]
Trueness Investigating the correlation between precision and trueness of spectrophotometers in measuring the whiteness index and tint factor of none fluorescence white ceramic [Volume 11, Issue 2, 2023, Pages 27-17]
Tubular Braid Theoretical Study on the Poisson’s Ratio of Tubular Braid’s Structure Considering Different Structural Deformation Regimes [Volume 12, Issue 3, 2024]

Keyword Index

A

B

C

D

E

F

G

H

I

J

K

L

M

N

P

R

S

T

V

W

Y

Z