Author Index
A
  • Ahmadi, Mohammad Saleh Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method [Volume 11, Issue 3, 2023, Pages 19-27]
  • Ahmadi, Mohammad Saleh Experimental and analytical study on tensile strength of short-fiber-reinforced adobe (SFRA) [Volume 11, Issue 3, 2023, Pages 29-38]
  • Asayesh, Azita Effect of Number and Position of Tuck Stitches in the Pattern Repeat on the Quality of Rib Weft-Knitted Fabrics from the Point of Comfort [Volume 11, Issue 3, 2023, Pages 39-48]
  • Asgharian Jeddi, Ali Asghar Effect of the structural components of the third generation of artificial football turf on shock absorption [Volume 11, Issue 1, 2023, Pages 27-34]
D
  • Dabirian, Farzad Enhancing Yarn Coverage with Electrospun Polyacrylonitrile Nanofibers via the Pin Spinning Method: An Investigation of Influencing Parameters [Volume 11, Issue 4, 2023, Pages 54-63]
  • Dabiryan, Hadi Modeling the geometry and simulating the low-velocity impact behavior of foam-based composite reinforced with warp-knitted spacer fabric [Volume 11, Issue 1, 2023, Pages 43-55]
  • Dabiryan, Hadi Experimental study on the effect of braiding angle on the fracture behavior of 2D braided composite cylinders [Volume 11, Issue 3, 2023, Pages 11-17]
  • Dadashian, Fatemeh Reinforcement of Cement Mortar with Waste Cotton Fluff Fiber [Volume 11, Issue 1, 2023, Pages 35-41]
  • Dadashian, Fatemeh Straightforward and highly-efficient feather keratin extraction by systematic optimization of sodium sulfide treatment process [Volume 11, Issue 1, 2023, Pages 57-67]
  • Dodankeh, Amir Hossein Modeling the geometry and simulating the low-velocity impact behavior of foam-based composite reinforced with warp-knitted spacer fabric [Volume 11, Issue 1, 2023, Pages 43-55]
E
  • Ehsani, Morteza Biological Applications of Double Nanofibers based on Silk Fibroin [Volume 11, Issue 4, 2023, Pages 31-42]
F
  • Fakhrzad, Mohammad Bagher Designing an Anti-fragile Supply Chain in the Textile Industry under Conditions of Uncertainty Using the Fuzzy BWM and TOPSIS [Volume 11, Issue 1, 2023, Pages 3-12]
  • Fattahi, Saeed Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method [Volume 11, Issue 3, 2023, Pages 19-27]
  • Fattahi, Saeed Experimental and analytical study on tensile strength of short-fiber-reinforced adobe (SFRA) [Volume 11, Issue 3, 2023, Pages 29-38]
G
  • Gharehaghaji, Ali Akbar Experimental study on the effect of braiding angle on the fracture behavior of 2D braided composite cylinders [Volume 11, Issue 3, 2023, Pages 11-17]
  • Ghasemi, Reza Effect of the structural components of the third generation of artificial football turf on shock absorption [Volume 11, Issue 1, 2023, Pages 27-34]
  • Ghasemi-Mobarakeh, Laleh An overview of recent advances in the development of MXene nanoplates-based textiles [Volume 11, Issue 2, 2023, Pages 85-114]
  • Goudarzi, Gholamreza Straightforward and highly-efficient feather keratin extraction by systematic optimization of sodium sulfide treatment process [Volume 11, Issue 1, 2023, Pages 57-67]
H
  • Heydari, Sepide Enhancing Yarn Coverage with Electrospun Polyacrylonitrile Nanofibers via the Pin Spinning Method: An Investigation of Influencing Parameters [Volume 11, Issue 4, 2023, Pages 54-63]
  • Hosseini Ghavam Abadi, Roya Improvement of tensile strength of glass/epoxy multilayer composites by addition of short glass fibers [Volume 11, Issue 4, 2023, Pages 22-30]
J
  • Jafari, Razieh Investigating the correlation between precision and trueness of spectrophotometers in measuring the whiteness index and tint factor of none fluorescence white ceramic [Volume 11, Issue 2, 2023, Pages 27-17]
K
  • Kazemi, Hamideh Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method [Volume 11, Issue 3, 2023, Pages 19-27]
  • K. Dolatabadi, Mehdi The effect of the structural characteristics of plain knitted fabrics on the sound absorption coefficient: in single-layer and multi-layer [Volume 11, Issue 2, 2023, Pages 49-59]
  • Khalili, Najmeh Investigating the correlation between precision and trueness of spectrophotometers in measuring the whiteness index and tint factor of none fluorescence white ceramic [Volume 11, Issue 2, 2023, Pages 27-17]
  • Kheirandish, Maryam Investigating of Transesterification and Properties of Polyethylene Terephthalate/Polylactic Acid Blend Film [Volume 11, Issue 2, 2023, Pages 15-3]
  • Khoddami, Akbar Insect repellent finish of cotton fabric using natural eucalyptus, clove and Myrtle [Volume 11, Issue 2, 2023, Pages 61-84]
L
  • Latifi, Masoud 3D printing of thermoset composite reinforced with continuous fibers and evaluation of its mechanical properties [Volume 11, Issue 4, 2023, Pages 3-11]
M
  • Mandegari, Mansoor An overview of recent advances in the development of MXene nanoplates-based textiles [Volume 11, Issue 2, 2023, Pages 85-114]
  • Mirdehghan, Sayed Abolfazl The flexural behavior of Stitched Polyurethane Foam Composite Sandwich Structures [Volume 11, Issue 3, 2023, Pages 3-10]
  • Mirdehghan, Sayed Abolfazl Improvement of tensile strength of glass/epoxy multilayer composites by addition of short glass fibers [Volume 11, Issue 4, 2023, Pages 22-30]
  • Mirdehghan, Seyed Abolfazl The effect of loom parameters on some properties of woven fabrics [Volume 11, Issue 4, 2023, Pages 43-53]
  • Miremad, Seyed Hossein Biological Applications of Double Nanofibers based on Silk Fibroin [Volume 11, Issue 4, 2023, Pages 31-42]
  • Mirjalili, Mohammad Reza Experimental and analytical study on tensile strength of short-fiber-reinforced adobe (SFRA) [Volume 11, Issue 3, 2023, Pages 29-38]
  • Mohades Mojtahedi, Mohammad Reza Investigating of Transesterification and Properties of Polyethylene Terephthalate/Polylactic Acid Blend Film [Volume 11, Issue 2, 2023, Pages 15-3]
  • Moradi, Hamid Reza An overview of synthetic microfibers: fabrication, properties, applications and environmental problems [Volume 11, Issue 2, 2023, Pages 29-47]
  • Moradi, Masoud Enhancing Yarn Coverage with Electrospun Polyacrylonitrile Nanofibers via the Pin Spinning Method: An Investigation of Influencing Parameters [Volume 11, Issue 4, 2023, Pages 54-63]
  • Mostajeran, Masoud Insect repellent finish of cotton fabric using natural eucalyptus, clove and Myrtle [Volume 11, Issue 2, 2023, Pages 61-84]
N
  • Najafloo, Behzad 3D printing of thermoset composite reinforced with continuous fibers and evaluation of its mechanical properties [Volume 11, Issue 4, 2023, Pages 3-11]
  • Najahi Osgooei, Alireza The effect of loom parameters on some properties of woven fabrics [Volume 11, Issue 4, 2023, Pages 43-53]
  • Nasouri, Komeil An overview of recent advances in the development of MXene nanoplates-based textiles [Volume 11, Issue 2, 2023, Pages 85-114]
  • Nasouri, Komeil An overview of synthetic microfibers: fabrication, properties, applications and environmental problems [Volume 11, Issue 2, 2023, Pages 29-47]
  • Nazokdast, Hossein Investigating of Transesterification and Properties of Polyethylene Terephthalate/Polylactic Acid Blend Film [Volume 11, Issue 2, 2023, Pages 15-3]
  • Noori Moafrad, Maedeh Effect of Number and Position of Tuck Stitches in the Pattern Repeat on the Quality of Rib Weft-Knitted Fabrics from the Point of Comfort [Volume 11, Issue 3, 2023, Pages 39-48]
  • Nosraty, Hooshang The flexural behavior of Stitched Polyurethane Foam Composite Sandwich Structures [Volume 11, Issue 3, 2023, Pages 3-10]
  • Nosraty, Hooshang Improvement of tensile strength of glass/epoxy multilayer composites by addition of short glass fibers [Volume 11, Issue 4, 2023, Pages 22-30]
  • Nosraty, Hooshang The effect of loom parameters on some properties of woven fabrics [Volume 11, Issue 4, 2023, Pages 43-53]
R
  • Rahimi, Mona Investigating the effect of various extraction solvents on the colorimetric and fastness properties of silk fabrics dyed with spent coffee grounds as the natural colorant [Volume 11, Issue 4, 2023, Pages 12-21]
  • Rajabi, Laleh Enhancing Yarn Coverage with Electrospun Polyacrylonitrile Nanofibers via the Pin Spinning Method: An Investigation of Influencing Parameters [Volume 11, Issue 4, 2023, Pages 54-63]
  • Rashidi, Abosaeed The effect of the structural characteristics of plain knitted fabrics on the sound absorption coefficient: in single-layer and multi-layer [Volume 11, Issue 2, 2023, Pages 49-59]
  • Rasouli Rizi, Shekoufeh The flexural behavior of Stitched Polyurethane Foam Composite Sandwich Structures [Volume 11, Issue 3, 2023, Pages 3-10]
  • Ravari, Fatemeh Biological Applications of Double Nanofibers based on Silk Fibroin [Volume 11, Issue 4, 2023, Pages 31-42]
  • Razbin, Milad Modeling Poisson’s Ratio and Tensile Behavior of Auxetic 4-Plied Yarn [Volume 11, Issue 3, 2023, Pages 49-57]
  • Rezadoost, Amir M. Experimental study on the effect of braiding angle on the fracture behavior of 2D braided composite cylinders [Volume 11, Issue 3, 2023, Pages 11-17]
  • Rezadoost, Amir M. 3D printing of thermoset composite reinforced with continuous fibers and evaluation of its mechanical properties [Volume 11, Issue 4, 2023, Pages 3-11]
S
  • Sadeghi, Abdolhossein Effect of the structural components of the third generation of artificial football turf on shock absorption [Volume 11, Issue 1, 2023, Pages 27-34]
  • Sadeghi-Sadeghabad, Milad Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method [Volume 11, Issue 3, 2023, Pages 19-27]
  • Saffari, Mohammad-Reza The effect of the structural characteristics of plain knitted fabrics on the sound absorption coefficient: in single-layer and multi-layer [Volume 11, Issue 2, 2023, Pages 49-59]
  • Salehian, Mortaza Modeling Poisson’s Ratio and Tensile Behavior of Auxetic 4-Plied Yarn [Volume 11, Issue 3, 2023, Pages 49-57]
  • Samiei sefat, Azar Insect repellent finish of cotton fabric using natural eucalyptus, clove and Myrtle [Volume 11, Issue 2, 2023, Pages 61-84]
  • Sepehrizadeh, Zargham Straightforward and highly-efficient feather keratin extraction by systematic optimization of sodium sulfide treatment process [Volume 11, Issue 1, 2023, Pages 57-67]
  • Shahmoradi, Fateme Investigating the effect of various extraction solvents on the colorimetric and fastness properties of silk fabrics dyed with spent coffee grounds as the natural colorant [Volume 11, Issue 4, 2023, Pages 12-21]
T
  • Tehrani, Majid Investigating the effect of various extraction solvents on the colorimetric and fastness properties of silk fabrics dyed with spent coffee grounds as the natural colorant [Volume 11, Issue 4, 2023, Pages 12-21]
V
  • Vatanara, Alireza Straightforward and highly-efficient feather keratin extraction by systematic optimization of sodium sulfide treatment process [Volume 11, Issue 1, 2023, Pages 57-67]
Y
  • Yazdanshenas, Mohammad Esmail The effect of the structural characteristics of plain knitted fabrics on the sound absorption coefficient: in single-layer and multi-layer [Volume 11, Issue 2, 2023, Pages 49-59]
Z
  • Zeynivand Mojarrad, Maryam Experimental study on the effect of braiding angle on the fracture behavior of 2D braided composite cylinders [Volume 11, Issue 3, 2023, Pages 11-17]