نوع مقاله : مقاله پژوهشی
[1] K.P. Feltz, E.A.G. Kalaf, C. Chen, R.S. Martin, and S.A. Sell, “A review of electrospinning manipulation techniques to direct fiber deposition and maximize pore sizeˮ, Electrospinning, vol. 1, no. 1, pp. 46-61, 2017. [2] H. Kriel, M. Coates, and A. Smit, “Electrospun Fibers for Advanced Wound Care: Moving from Novel Lab-Scale Curiosities to Commercial Realitiesˮ, in Electrospinning: From Basic Research to Commercialization, 2018, pp. 95-135. [3] J. Hu, D. Kai, H. Ye, L. Tian, X. Ding, S. Ramakrishna, and X.J. Loh, “Electrospinning of poly(glycerol sebacate)-based nanofibers for nerve tissue engineeringˮ, Mat. Sci. Eng. C, vol. 70, pp. 10891094, 2017. [4] M.R. Casanova, R.L. Reis, A. Martins, and N.M. Neves, “Nanotechnology, Scaffolding-Related Developments and Translationˮ, in The Use of Electrospinning Technique on Osteochondral Tissue Engineering, Osteochondral Tissue Engineering, 2018, pp. 247-263. [5] V. Mouriño, “Nanoelectrospun Matrices for Localized Drug Deliveryˮ, in Applications of Nanocomposite Materials in Drug Delivery, Elsevier, 2018, pp. 491508. [6] A. Khalf and S.V. Madihally, “Recent advances in multiaxial electrospinning for drug deliveryˮ, Eur. J. Pharm. Biopharm., vol. 112, pp. 1-17, 2017. [7] R. Halaui, E. Zussman, R. Khalfin, R. Semiat, and Y. Cohen, “Polymeric microtubes for water filtration by co-axial electrospinning techniqueˮ, Polym. Adv. Technol., vol. 28, no. 5, pp. 570-582, 2017. [8] H. Gao, Y. Yang, O. Akampumuza, J. Hou, H. Zhang, and X. Qin, “A low filtration resistance threedimensional composite membrane fabricated via free surface electrospinning for effective PM 2.5 captureˮ, Env. Sci. Nano, vol. 4, no. 4, pp. 864-875, 2017. [9] M. Zhang, X. Zhao, G. Zhang, G. Wei, and Z. Su, “Electrospinning design of functional nanostructures for biosensor applicationsˮ, J. Mater. Chem. B, vol. 5, no. 9, pp. 1699-1711, 2017. [10] P. Ekabutr, W. Klinkajon, P. Sangsanoh, O. Chailapakul, P. Niamlang, T. Khampieng, and P. Supaphol, “Electrospinning: a carbonized gold/graphene/PAN nanofiber for high performance biosensingˮ, Anal.
Methods-UK, vol. 10, no. 8, pp. 874-883, 2018. [11] S. Chawla, J. Cai, and M. Naraghi, “Mechanical tests on individual carbon nanofibers reveals the strong effect of graphitic alignment achieved via precursor hot-drawingˮ, Carbon, vol. 117, pp. 208-219, 2017. [12] A. Morel, S. Domaschke, V.U. Kumaran, D. Alexeev, A. Sadeghpour, S.N. Ramakrishna, S.J. Ferguson
et al., “Correlating diameter, mechanical and structural properties of poly(L-lactide) fibres from needleless electrospinningˮ, Acta Biomater., vol. 81, pp. 169183, 2018. [13] K. Sakakibara, Y. Moriki, H. Yano, and Y. Tsujii, “Strategy for the improvement of the mechanical properties of cellulose nanofiber-reinforced highdensity polyethylene nanocomposites using diblock copolymer dispersantsˮ, ACS Appl. Mater. Inter., vol. 9, no. 50, pp. 44079-44087, 2017. [14] S.G. King, N.J. Terrill, A.J. Goodwin, R. Stevens, V. Stolojan, and S.R.P. Silva, “Probing of polymer to carbon nanotube surface interactions within highly aligned electrospun nanofibers for advanced compositesˮ, Carbon, vol. 138, pp. 207-214, 2018. [15] X.-L. Xie, Y.-W. Mai, and X.-P. Zhou, “Dispersion and alignment of carbon nanotubes in polymer matrix: a reviewˮ, Mater. Sci. Eng. R Rep., vol. 49, no. 4, pp. 89-112, 2005. [16] G. Mittal, V. Dhand, K.Y. Rhee, S.-J. Park, and W.R. Lee, “A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocompositesˮ, J. Ind. Eng. Chem., vol. 21, pp. 11-25, 2015. [17] V.D. Punetha, S. Rana, H.J. Yoo, A. Chaurasia, J.T. McLeskey Jr, M.S. Ramasamy, N.G. Sahoo et al., “Functionalization of carbon nanomaterials for advanced polymer nanocomposites: a comparison study between CNT and grapheneˮ, Prog. Polym. Sci., vol. 67, pp. 1-47, 2017. [18] R. Rafiee and R. Pourazizi, “Influence of CNT functionalization on the interphase region between CNT and polymerˮ, Comp. Mater. Sci., vol. 96, pp. 573-578, 2015. [19] L.A. Mercante, A. Pavinatto, L.E. Iwaki, V.P. Scagion, V. Zucolotto, O.N. Oliveira Jr, L.H. Mattoso
et al., “Electrospun polyamide 6/poly(allylamine hydrochloride) nanofibers functionalized with carbon nanotubes for electrochemical detection of dopamineˮ, ACS Appl. Mater. Inter., vol. 7, no. 8, pp. 4784-4790, 2015. [20] G. Abagnale, A. Sechi, M. Steger, Q. Zhou, C.-C. Kuo, G. Aydin, C. Schalla et al., “Surface topography guides morphology and spatial patterning of induced pluripotent stem cell coloniesˮ, Stem Cell Rep., vol. 9, no. 2, pp. 654-666, 2017. [21] F.J.H. Abadi, M.A. Tehran, F. Zamani, M. Nematollahi, L.G. Mobarakeh, and M.H. Nasr-Esfahani, “Effect of nanoporous fibers on growth and proliferation of cells on electrospun poly(ϵ-caprolactone) scaffoldsˮ, Int. J. Polym. Mater. Po., vol. 63, no. 2, pp. 57-64, 2014. [22] K.M. Kennedy, A. Bhaw-Luximon, and D. Jhurry, “Cell-matrix mechanical interaction in electrospun polymeric scaffolds for tissue engineering: implications for scaffold design and performanceˮ, Acta Biomater., vol. 50, pp. 41-55, 2017. [23] G.-Y. Liao, X.-P. Zhou, L. Chen, X.-Y. Zeng, X.-L. Xie, and Y.-W. Mai, “Electrospun aligned PLLA/ PCL/functionalised multiwalled carbon nanotube composite fibrous membranes and their bio/ mechanical propertiesˮ, Compos. Sci. Technol., vol. 72, no. 2, pp. 248-255, 2012. [24] K. Saeed, S.-Y. Park, H.-J. Lee, J.-B. Baek, and W.S. Huh, “Preparation of electrospun nanofibers of carbon nanotube/polycaprolactone nanocompositeˮ, Polymer, vol. 47, no. 23, pp. 8019-8025, 2006.
[25] Z.X. Meng, W. Zheng, L. Li, and Y.F. Zheng, “Fabrication and characterization of threedimensional nanofiber membrance of PCL–MWCNTs by electrospinningˮ, Mater. Sci. Eng. C, vol. 30, no. 7, pp. 1014-1021, 2010. [26] F. Jahanmard-Hosseinabadi, M. Amani-Tehran, and M.B. Eslaminejad, “Mathematical modeling and experimental evaluation for the predication of single nanofiber modulusˮ, J. Mech. Behav. Biomed., vol. 79, pp. 38-45, 2018. [27] M. Shtein, I. Pri-Bar, and O. Regev, “A simple solution for the determination of pristine carbon nanotube concentrationˮ, Analyst, vol. 138, no. 5, pp. 14901496, 2013. [28] Y. Liu and S. Kumar, “Polymer/carbon nanotube nano composite fibers–a reviewˮ, ACS Appl. Mater. Inter., vol. 6, no. 9, pp. 6069-6087, 2014. [29] Q. Shi, S.-C. Wong, W. Ye, J. Hou, J. Zhao, and J. Yin, “Mechanism of adhesion between polymer fibers at nanoscale contactsˮ, Langmuir, vol. 28, no. 10, pp. 4663-4671, 2012.
Methods-UK, vol. 10, no. 8, pp. 874-883, 2018. [11] S. Chawla, J. Cai, and M. Naraghi, “Mechanical tests on individual carbon nanofibers reveals the strong effect of graphitic alignment achieved via precursor hot-drawingˮ, Carbon, vol. 117, pp. 208-219, 2017. [12] A. Morel, S. Domaschke, V.U. Kumaran, D. Alexeev, A. Sadeghpour, S.N. Ramakrishna, S.J. Ferguson
et al., “Correlating diameter, mechanical and structural properties of poly(L-lactide) fibres from needleless electrospinningˮ, Acta Biomater., vol. 81, pp. 169183, 2018. [13] K. Sakakibara, Y. Moriki, H. Yano, and Y. Tsujii, “Strategy for the improvement of the mechanical properties of cellulose nanofiber-reinforced highdensity polyethylene nanocomposites using diblock copolymer dispersantsˮ, ACS Appl. Mater. Inter., vol. 9, no. 50, pp. 44079-44087, 2017. [14] S.G. King, N.J. Terrill, A.J. Goodwin, R. Stevens, V. Stolojan, and S.R.P. Silva, “Probing of polymer to carbon nanotube surface interactions within highly aligned electrospun nanofibers for advanced compositesˮ, Carbon, vol. 138, pp. 207-214, 2018. [15] X.-L. Xie, Y.-W. Mai, and X.-P. Zhou, “Dispersion and alignment of carbon nanotubes in polymer matrix: a reviewˮ, Mater. Sci. Eng. R Rep., vol. 49, no. 4, pp. 89-112, 2005. [16] G. Mittal, V. Dhand, K.Y. Rhee, S.-J. Park, and W.R. Lee, “A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocompositesˮ, J. Ind. Eng. Chem., vol. 21, pp. 11-25, 2015. [17] V.D. Punetha, S. Rana, H.J. Yoo, A. Chaurasia, J.T. McLeskey Jr, M.S. Ramasamy, N.G. Sahoo et al., “Functionalization of carbon nanomaterials for advanced polymer nanocomposites: a comparison study between CNT and grapheneˮ, Prog. Polym. Sci., vol. 67, pp. 1-47, 2017. [18] R. Rafiee and R. Pourazizi, “Influence of CNT functionalization on the interphase region between CNT and polymerˮ, Comp. Mater. Sci., vol. 96, pp. 573-578, 2015. [19] L.A. Mercante, A. Pavinatto, L.E. Iwaki, V.P. Scagion, V. Zucolotto, O.N. Oliveira Jr, L.H. Mattoso
et al., “Electrospun polyamide 6/poly(allylamine hydrochloride) nanofibers functionalized with carbon nanotubes for electrochemical detection of dopamineˮ, ACS Appl. Mater. Inter., vol. 7, no. 8, pp. 4784-4790, 2015. [20] G. Abagnale, A. Sechi, M. Steger, Q. Zhou, C.-C. Kuo, G. Aydin, C. Schalla et al., “Surface topography guides morphology and spatial patterning of induced pluripotent stem cell coloniesˮ, Stem Cell Rep., vol. 9, no. 2, pp. 654-666, 2017. [21] F.J.H. Abadi, M.A. Tehran, F. Zamani, M. Nematollahi, L.G. Mobarakeh, and M.H. Nasr-Esfahani, “Effect of nanoporous fibers on growth and proliferation of cells on electrospun poly(ϵ-caprolactone) scaffoldsˮ, Int. J. Polym. Mater. Po., vol. 63, no. 2, pp. 57-64, 2014. [22] K.M. Kennedy, A. Bhaw-Luximon, and D. Jhurry, “Cell-matrix mechanical interaction in electrospun polymeric scaffolds for tissue engineering: implications for scaffold design and performanceˮ, Acta Biomater., vol. 50, pp. 41-55, 2017. [23] G.-Y. Liao, X.-P. Zhou, L. Chen, X.-Y. Zeng, X.-L. Xie, and Y.-W. Mai, “Electrospun aligned PLLA/ PCL/functionalised multiwalled carbon nanotube composite fibrous membranes and their bio/ mechanical propertiesˮ, Compos. Sci. Technol., vol. 72, no. 2, pp. 248-255, 2012. [24] K. Saeed, S.-Y. Park, H.-J. Lee, J.-B. Baek, and W.S. Huh, “Preparation of electrospun nanofibers of carbon nanotube/polycaprolactone nanocompositeˮ, Polymer, vol. 47, no. 23, pp. 8019-8025, 2006.
[25] Z.X. Meng, W. Zheng, L. Li, and Y.F. Zheng, “Fabrication and characterization of threedimensional nanofiber membrance of PCL–MWCNTs by electrospinningˮ, Mater. Sci. Eng. C, vol. 30, no. 7, pp. 1014-1021, 2010. [26] F. Jahanmard-Hosseinabadi, M. Amani-Tehran, and M.B. Eslaminejad, “Mathematical modeling and experimental evaluation for the predication of single nanofiber modulusˮ, J. Mech. Behav. Biomed., vol. 79, pp. 38-45, 2018. [27] M. Shtein, I. Pri-Bar, and O. Regev, “A simple solution for the determination of pristine carbon nanotube concentrationˮ, Analyst, vol. 138, no. 5, pp. 14901496, 2013. [28] Y. Liu and S. Kumar, “Polymer/carbon nanotube nano composite fibers–a reviewˮ, ACS Appl. Mater. Inter., vol. 6, no. 9, pp. 6069-6087, 2014. [29] Q. Shi, S.-C. Wong, W. Ye, J. Hou, J. Zhao, and J. Yin, “Mechanism of adhesion between polymer fibers at nanoscale contactsˮ, Langmuir, vol. 28, no. 10, pp. 4663-4671, 2012.
)