نوع مقاله : مقاله پژوهشی
[1] N.F. Attia, N.S. Abd El-Aal, and M.A. Hassan, “Facile synthesis of graphene sheets decorated nanoparticles and flammability of their polymer nanocomposites”, Polym. Degrad. Stabil., vol. 126, pp. 65-74, 2016. [2] S. Bourbigot and S. Duquesne, “Fire retardant polymers: recent developments and opportunities”, J. Mater. Chem., vol. 17, no. 22, pp. 2283-2300, 2007. [3] A.L. Higginbotham, J.R. Lomeda, A.B. Morgan, and J.M. Tour, “Graphite oxide flame-retardant polymer nanocomposites”, ACS Appl. Mater. Inter., vol. 1, no. 10, pp. 2256-2261, 2009. [4] N.F. Attia, J.P. Rao, and K.E. Geckeler, “Nanodiamond– polymer nanoparticle composites and their thin films”, J. Nanopart. Res., vol. 16, pp. 2361, 2014. [5] A.B. Morgan and J.W. Gilman, “An overview of flame retardancy of polymeric materials: application, technology, and future directions”, Fire Mater., vol. 37, pp. 259-279, 2013. [6] J.Z. Liang, J.Q. Feng, C.P. Tsui, C.Y. Tang, D.F. Liu, S.D. Zhang, and W.F. Huang, “Mechanical properties and flame-retardant of PP/MRP/Mg(OH)2/Al(OH)3 composites”, Compos. B: Eng., vol. 71, pp. 74-81, 2015. [7] Z. Bin, L. Hong, and H. Jian, “Aluminum phosphate microcapsule flame retardants for flexible polyurethane foams”, J. Phys. Chem. Solids, vol. 115, pp. 199-207, 2018. [8] Z. Liyong, Z. Min, L. Jiyan, L. Xueqing, C. Jia, H. Quan, and Peng. Sha, “Flame-retardant thermoplastic polyester based on multiarm aluminum phosphinate for improving anti-dripping”, Thermochim. Acta, vol. 664, pp. 118-127, 2018. [9] L. Yunhua, W. Chifei, and X. Shiai, “Mechanical, thermal and flame retardant properties of magnesium hydroxide filled poly(vinyl chloride) composites: the effect of filler shape”, Compos. Part A: Appl. Sci. Manuf., vol. 113, pp. 1-11, 2018. [10] Z. Shariatinia, N. Javeri, and S. Shekarriz, “Flame retardant cotton fibers produced using novel synthesized halogen-free phosphoramide nanoparticles”, Carbohyd. Polym., vol. 118, pp. 183198, 2015. [11] W. Dong, M. Xiaowei, C. Wei, S. Lei, M. Chao, and H. Yuan, “Constructing phosphorus, nitrogen, silicon-cocontained boron nitride nanosheets to reinforce flame retardant properties of unsaturated polyester resin”, Compos. Part A: Appl. Sci. Manuf., vol. 109, pp. 546554, 2018.
[12] Q. Shuilai, H. Yanbei, X. Weiyi, M. Chao, Z. Xia, L. Longxiang, K. Yongchun et al., “Self-assembled supermolecular aggregate supported on boron nitride nanoplatelets for flame retardant and friction application”, Chem. Eng. J., vol. 349, pp. 223-234, 2018. [13] W. Wei, P. Ying, P. Haifeng, Y. Wei, K.M. Liew, S. Lei, and H. Yuan, “Synthesis and characterization of MnO2 nanosheets based multilayer coating and applications as a flame retardant for flexible polyurethane foam”, Compos. Sci. Technol., vol. 123, pp. 212-221, 2016. [14] Y. Pan, W. Wang, H. Pan, J. Zhan, and Y. Hu, “Fabrication of montmorillonite and titanate nanotube based coatings via layer-by-layer self-assembly method to enhance the thermal stability, flame retardancy and ultraviolet protection of polyethylene terephthalate (PET) fabric”, RSC Adv., vol. 6, pp. 53625-53634, 2016. [15] C. Xian-Wei, G. Jin-Ping, Y. Xu-Hong, and T. RenCheng, “Durable flame retardant wool fabric treated by phytic acid and TiO2 using an exhaustion-assisted pad-dry-cure process”, Thermochim. Acta, vol. 665, pp. 28-36, 2018. [16] Z. Qiang-hua, G. Jiali, C. Guo-qiang, and X. Tie-ling, “Durable flame retardant finish for silk fabric using boron hybrid silica sol”, Appl. Surf. Sci., vol. 387, pp. 446-453, 2016. [17] Q. Shuilai, H. Yixin, S. Yongqian, H. Yanbei, K. Yongchun, C. Fukai, S. Haibo et al., “In situ growth of polyphosphazene particles on molybdenum disulfide nanosheets for flame retardant and friction application”, Compos. Part A: Appl. Sci. Manuf., vol. 114, pp. 407-417, 2018. [18] Z. Sheng, Y. Yongxin, W. Wenji, G. Xiaoyu, L. Hongfei, L. Jianhua, and S. Jun, “Intercalation of phosphotungstic acid into layered double hydroxides by reconstruction method and its application in intumescent flame retardant poly(lactic acid) composites”, Polym. Degrad. Stabil., vol. 147, pp. 142-150, 2018. [19] J. Xiaoying, C. Dayong, W. Qingwen, S. Jiabin, and G. Shaoyun, “Synergistic effect of flame retardants and carbon nanotubes on flame retarding and electromagnetic shielding properties of thermoplastic polyurethane”, Compos. Sci. Technol., vol. 163, pp. 49-55, 2018. [20] Y. Pan and D. Wang, “One-step hydrothermal synthesis of nano zinc carbonate and its use as a promising substitute for antimony trioxide in flame retardant flexible poly(vinyl chloride)”, RSC Adv., vol. 5, pp. 27837- 27843, 2015.
[21] G. Laufer, F. Carosio, R. Martinez, G. Camino, and J.C. Grunlan, “Growth and fire resistance of colloidal silica-polyelectrolyte thin film assemblies”, J. Colloid Interf. Sci., vol. 356, pp. 69-77, 2011. [22] Y. Liu, X. Wang, K. Qi, and J.H. Xin, “Functionalization of cotton with carbon nanotubes”, J. Mater. Chem., vol. 18, pp. 3454-3460, 2008. [23] J. Alongi, J. Tata, and A. Frache, “Hydrotalcite and nanometric silica as finishing additives to enhance the thermal stability and flame retardancy of cotton”, Cellulose, vol. 18, pp. 179-190, 2011. [24] Y.C. Li, J. Schulz, S. Mannen, C. Delhom, B. Condon, S. Chang, M. Zammarano et al., “Flame retardant behavior of polyelectrolyte clay thin film assemblies on cotton fabric”, ACS Nano., vol. 4, pp. 3325–3337, 2010. [25] T. Kashiwagi, F. Du, J.F. Douglas, K.I. Winey, R.H. Harris Jr, and J.R. Shields, “Nanoparticle networks reduce the flammability of polymer nanocomposites”, Nature Mater., vol. 4, pp. 928–933, 2005. [26] H.F. Moafi and S.M. Mostashari, “Flame-resistant polymeric composite fibers based on nanocoating flame retardant: thermogravimetric study and production of α-Al2O3 nanoparticles by flame combustion”, J. Polym. Eng., vol. 34, no. 9, pp. 803–812, 2014. [27] S.M. Mostashari and H.F. Moafi, “Thermal decomposition pathway of a cellulosic fabric impregnated by magnesium chloride hexahydrate as a flame-retardant”, J. Therm. Anal. Calorim., vol. 93, no. 2, pp. 589-594, 2008. [28] H.F. Moafi, A.F. Shojaie, and M.A. Zanjanchi, “Flameretardancy and photocatalytic properties of cellulosic fabric coated by nano-sized titanium dioxide”, J. Therm. Anal. Calorim., vol. 104, no. 2, pp. 717–724, 2011. [29] H.F. Moafi, A.F. Shojaie, and M.A. Zanjanchi, “Synthesis and characterization of nano-sized zinc oxide coating on cellulosic fibers: photoactivity and flame-retardancy study”, Chin. J. Chem., vol. 29, pp. 1239-1245, 2011. [30] C. Chinkap, L. Myunghee, and C. Eun Kyung, “Characterization of cotton fabric scouring by FT-IR ATR spectroscopy”, Carbohyd. Polym., vol. 58, pp. 417–420, 2004. [31] R. Chen, K. Jakes, R. Chen, and K. Jakes, “Effects of pressing on the infrared spectra of single cotton fibers”, Appl. Spectrosc., vol. 56, pp. 646–650, 2002. [32] N. Longhui, W. Jie, and Yu. Jiaguo, “Preparation of a Pt/TiO2/cotton fiber composite catalyst with low air resistance for E-cient formaldehyde oxidation at room temperature”, RSC Adv., vol. 7, pp. 21389- 21397, 2017. [33] R. Rahal, T. Pigot, D. Foix, and S. Lacombe, “Photocatalytic efficiency and self-cleaning properties under visible light of cotton fabrics coated with sensitized TiO2”, Appl. Catal. B: Environ., vol. 104, pp. 361–372, 2011. [34] P. Zhu, S. Sui, B. Wang, K. Sun, and G. Sun, “A study of pyrolysis and pyrolysis products of flame-retardant cotton fabrics by DSC, TGA, and PY–GC–MS”, J. Anal. Appl. Pyrol., vol. 71, pp. 645-655, 2004. [35] G. Sabyasachi, R. Patrick, S. Viktoriya, H. Manfred, R. Stefan, and V. Frederic, “Thermal decomposition and burning behavior of cellulose treated with ethyl ester phosphoramidates: efect of alkyl substituent on nitrogen atom”, Polym. Degrad. Stabil., vol. 94, pp. 1125–1134, 2009. [36] X. Weiyi, J. Ganxin, S. Lei, H. Shuang, L. Xiaoqi, W. Xin, and H. Yuan, “Flame retardancy and thermal degradation of cotton textiles based on UV-curable flame retardant coatings”, Thermochim. Acta, vol. 513, pp. 75-82, 2011.
[21] G. Laufer, F. Carosio, R. Martinez, G. Camino, and J.C. Grunlan, “Growth and fire resistance of colloidal silica-polyelectrolyte thin film assemblies”, J. Colloid Interf. Sci., vol. 356, pp. 69-77, 2011. [22] Y. Liu, X. Wang, K. Qi, and J.H. Xin, “Functionalization of cotton with carbon nanotubes”, J. Mater. Chem., vol. 18, pp. 3454-3460, 2008. [23] J. Alongi, J. Tata, and A. Frache, “Hydrotalcite and nanometric silica as finishing additives to enhance the thermal stability and flame retardancy of cotton”, Cellulose, vol. 18, pp. 179-190, 2011. [24] Y.C. Li, J. Schulz, S. Mannen, C. Delhom, B. Condon, S. Chang, M. Zammarano et al., “Flame retardant behavior of polyelectrolyte clay thin film assemblies on cotton fabric”, ACS Nano., vol. 4, pp. 3325–3337, 2010. [25] T. Kashiwagi, F. Du, J.F. Douglas, K.I. Winey, R.H. Harris Jr, and J.R. Shields, “Nanoparticle networks reduce the flammability of polymer nanocomposites”, Nature Mater., vol. 4, pp. 928–933, 2005. [26] H.F. Moafi and S.M. Mostashari, “Flame-resistant polymeric composite fibers based on nanocoating flame retardant: thermogravimetric study and production of α-Al2O3 nanoparticles by flame combustion”, J. Polym. Eng., vol. 34, no. 9, pp. 803–812, 2014. [27] S.M. Mostashari and H.F. Moafi, “Thermal decomposition pathway of a cellulosic fabric impregnated by magnesium chloride hexahydrate as a flame-retardant”, J. Therm. Anal. Calorim., vol. 93, no. 2, pp. 589-594, 2008. [28] H.F. Moafi, A.F. Shojaie, and M.A. Zanjanchi, “Flameretardancy and photocatalytic properties of cellulosic fabric coated by nano-sized titanium dioxide”, J. Therm. Anal. Calorim., vol. 104, no. 2, pp. 717–724, 2011. [29] H.F. Moafi, A.F. Shojaie, and M.A. Zanjanchi, “Synthesis and characterization of nano-sized zinc oxide coating on cellulosic fibers: photoactivity and flame-retardancy study”, Chin. J. Chem., vol. 29, pp. 1239-1245, 2011. [30] C. Chinkap, L. Myunghee, and C. Eun Kyung, “Characterization of cotton fabric scouring by FT-IR ATR spectroscopy”, Carbohyd. Polym., vol. 58, pp. 417–420, 2004. [31] R. Chen, K. Jakes, R. Chen, and K. Jakes, “Effects of pressing on the infrared spectra of single cotton fibers”, Appl. Spectrosc., vol. 56, pp. 646–650, 2002. [32] N. Longhui, W. Jie, and Yu. Jiaguo, “Preparation of a Pt/TiO2/cotton fiber composite catalyst with low air resistance for E-cient formaldehyde oxidation at room temperature”, RSC Adv., vol. 7, pp. 21389- 21397, 2017. [33] R. Rahal, T. Pigot, D. Foix, and S. Lacombe, “Photocatalytic efficiency and self-cleaning properties under visible light of cotton fabrics coated with sensitized TiO2”, Appl. Catal. B: Environ., vol. 104, pp. 361–372, 2011. [34] P. Zhu, S. Sui, B. Wang, K. Sun, and G. Sun, “A study of pyrolysis and pyrolysis products of flame-retardant cotton fabrics by DSC, TGA, and PY–GC–MS”, J. Anal. Appl. Pyrol., vol. 71, pp. 645-655, 2004. [35] G. Sabyasachi, R. Patrick, S. Viktoriya, H. Manfred, R. Stefan, and V. Frederic, “Thermal decomposition and burning behavior of cellulose treated with ethyl ester phosphoramidates: efect of alkyl substituent on nitrogen atom”, Polym. Degrad. Stabil., vol. 94, pp. 1125–1134, 2009. [36] X. Weiyi, J. Ganxin, S. Lei, H. Shuang, L. Xiaoqi, W. Xin, and H. Yuan, “Flame retardancy and thermal degradation of cotton textiles based on UV-curable flame retardant coatings”, Thermochim. Acta, vol. 513, pp. 75-82, 2011.
)