[1] EN ISO 13433, Geosynthetics-Dynamic Perforation Test (Cone Drop Test), 2006. [2]  ASTM D6797-02, Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) ball burst test, 2002. [3]  ISO 12236, International Standard Geosyntetics– Static Puncture Test (CBR test), 2006. [4]  S. Backer and D.R. Petterson, “Some principles of nonwoven fabrics”, Text. Res. J., vol. 30, no. 9, pp. 704-711, 1960. [5]  J.W.S. Hearle and A.T. Purdy, “The influence of the depth of needle penetration on needled-fabric structure and tensile”, J. Text. Inst., vol. 65, no. 1, pp. 6-12, 1974. [6]  J.W.S. Hearle and M.A.I. Sultan, “A study of needled fabrics part I: experimental methods and properties”, J. Text. Inst., vol. 58, no. 6, pp. 251-265, 1967. [7]  J.W.S. Hearle, M.A.I. Sultan, and T.N. Choudhari, “A study of needled fabrics part II: effect of needling process”, J. Text Inst., vol. 59, no. 2, pp. 103-116, 1968. [8]  A. Watanabe, M. Miwa, T. Yokoi, and A. Nakayama, “Fatigue behavior of aramid nonwoven fabrics under hot-press conditions part V: effect of punching density on mechanical properties”, Text. Res. J., vol. 68, no. 3, 
pp. 171-178, 1998. [9] A. Das, R. Alagirusamy, and B. Banerjee, “Study on needle-punched non-woven fabrics made from shrinkable and non-shrinkable acrylic blends. Part I: compressional behavior”, J. Text. Inst., vol. 100, no. 1, pp. 10-17, 2009. [10] S. Debnath and M. Madhusoothanan, “Compression behavior of jute-polypropylene blended needlepunched nonwoven fabrics”, Indian J. Fibre Text. Res., vol. 32, no. 4, pp. 427-433, 2007. [11] S. Debnath and M. Madhusoothanan, “Compression properties of polyester needle-punched fabric”, J. Eng. Fibres Fabr., vol. 4, no. 4, pp. 14-19, 2009. [12] S. Debnath and M. Madhusoothanan, “Compression behavior of jute–polypropylene blended needlepunched nonwoven under wet conditions”, J. Text. Inst., vol. 103, no. 6, pp. 583-594, 2012. [13] A. Rawal, “Effect of dynamic loading on pore size of needle-punched nonwoven geotextiles”, J. Text. Inst., vol. 99, no. 1, pp. 9-15, 2008. [14] A. Rawal, S. Anand, and T. Shah, “Optimization of parameters for the production of needle-punched nonwoven geotextiles”, J. Ind. Text., vol. 37, no. 4, pp. 341-356, 2008. [15] A. Rawal and R. Anandjiwala, “Relationship between process parameters and properties of multifunctional needle-punched geotextiles”, J. Ind. Text., vol. 35, no. 4, pp. 271-285, 2006. [16] T.K. Ghosh, “Puncture resistance of pre-strained geotextiles and its relation to uniaxial tensile strain at failure”, Geotext. Geomembr., vol. 16, no. 5, pp. 293302, 1998. [17] E. Koç and E. Çinçik, “An investigation on bursting strength of polyester/viscose blended needle-punched nonwovens”, Text. Res. J., vol. 82, no. 16, pp. 16211634, 2012. [18] A. Das and R.J. Raghav, “Bursting behavior of spunbonded nonwoven fabrics: part I- effect of various parameters”, Indian J. Fibre Text. Res., vol. 35, no. 3, pp. 258, 2010. [19] A. Das and R.J. Raghav, “Study on bursting behavior of spun-bonded nonwoven fabrics: part II- change in fabric characteristics dueto repeated bursting cycle”, Indian J. Fibre Text. Res., vol. 36, no. 1, pp. 53, 2011. [20] S. Ghosh and L. Chapman, “Effects of fiber blends and needling parameters on needle-punched moldable nonwoven fabric”, J. Text. Inst., vol.  93, no. 1, pp. 7587, 2002. [21] Y. Termonia, “Puncture resistance of fibrous structures”, Int. J. Impact Eng., vol. 32, no. 9, pp. 1512-1520, 2006.[22] R. Fangueiro, R. Carvalho, and F. Soutinho, “Mechanical properties of needle-punched nonwovens for geotechnical applications”: In: International Conference on Engineering, Portugal, 2011. [23] A.S. Askari, S.S. Najar, and Y.A. Vaghasloo, “Study the effect of test speed and fabric weight on puncture behavior of polyester needle punched nonwoven geotextiles”, J. Eng. Fibers Fabr., vol. 7, no. 3, 2012. [24] T.T. Li, R. Wang, C.W. Lou, J.Y. Lin, and J.H. Lin, “Static and dynamic puncture failure behaviors of 3D needle-punched compound fabric based on weibull distribution”, Text. Res. J., vol. 84, no. 18, pp. 19031914, 2014. [25] J.H. Lin, T.T. Li, and C.W. Lou, “Puncture-resisting, sound-absorbing and thermal-insulating properties of polypropylene-selvages reinforced composite nonwovens”, J. Ind. Text., vol. 45, no. 6, pp. 14771489, 2014. [26] T.T. Li, R. Wang, C.W. Lou, C.H. Huang, and J.H. 
Lin, “Mechanical and physical properties of punctureresistance plank made of recycled selvages”, Fibers Polym., vol. 14, no. 2, pp. 258-265, 2013. [27] T.T. Li, R. Wang, C.W. Lou, and J.H. Lin, “Evaluation of high-modulus, puncture-resistance composite nonwoven fabrics by response surface methodology”, J. Ind. Text., vol. 43, no. 2, pp. 247-263, 2013. [28] T.T. Li, R. Wang, C.W. Lou, and J.H. Lin, “Static and dynamic puncture behaviors of compound fabrics with recycled high-performance Kevlar fibers”, Compos. Part B: Eng., vol. 59, pp. 60-66, 2014. [29] T.T. Li, C.W. Lou, M.C. Lin, and J.H. Lin, “Processing technique and performance evaluation of high-modulus organic/inorganic puncture-resisting composites”, Fiber Text. East. Eur., vol. 22, no. 6, pp. 75-80, 2014. [30] GROZ-BECKERT. Needles; General Catalogue. Germany: GROZ-BECKERT, 2009.