[1] Q. B. Bui, J. C. Morel, B. V. Venkatarama Reddy, and W. Ghayad, “Durability of rammed earth walls exposed for 20 years to natural weathering,” Build. Environ., vol. 44, no. 5, pp. 912–919, May 2009, doi: 10.1016/j.buildenv.2008.07.001.
[2] J. . Morel, A. Mesbah, M. Oggero, and P. Walker, “Building houses with local materials: means to drastically reduce the environmental impact of construction,” Build. Environ., vol. 36, no. 10, pp. 1119–1126, Dec. 2001, doi: 10.1016/S0360-1323(00)00054-8.
[3] S. Ramakrishnan, S. Loganayagan, G. Kowshika, C. Ramprakash, and M. Aruneshwaran, “Adobe blocks reinforced with natural fibres: A review,” Mater. Today Proc., vol. 45, pp. 6493–6499, 2021, doi: 10.1016/j.matpr.2020.11.377.
[4] M. R. A. R. Correia, Conservation in earthen heritage assessment and significance of failure, criteria, conservation theory, and strategies. Cambridge Scholars Publishing, 2016.
[5] D. Silveira, H. Varum, A. Costa, T. Martins, H. Pereira, and J. Almeida, “Mechanical properties of adobe bricks in ancient constructions,” Constr. Build. Mater., vol. 28, no. 1, pp. 36–44, Mar. 2012, doi: 10.1016/j.conbuildmat.2011.08.046.
[6] P. Donkor, E. Obonyo, and C. Ferraro, “Fiber Reinforced Compressed Earth Blocks: Evaluating Flexural Strength Characteristics Using Short Flexural Beams,” Materials (Basel)., vol. 14, no. 22, p. 6906, Nov. 2021, doi: 10.3390/ma14226906.
[7] S. M. Hejazi, M. Sheikhzadeh, S. M. Abtahi, and A. Zadhoush, “A simple review of soil reinforcement by using natural and synthetic fibers,” Constr. Build. Mater., vol. 30, pp. 100–116, May 2012, doi: 10.1016/j.conbuildmat.2011.11.045.
[8] V. Sharma, H. K. Vinayak, and B. M. Marwaha, “Enhancing sustainability of rural adobe houses of hills by addition of vernacular fiber reinforcement,” Int. J. Sustain. Built Environ., vol. 4, no. 2, pp. 348–358, Dec. 2015, doi: 10.1016/j.ijsbe.2015.07.002.
[9] E. Olacia, A. L. Pisello, V. Chiodo, S. Maisano, A. Frazzica, and L. F. Cabeza, “Sustainable adobe bricks with seagrass fibres. Mechanical and thermal properties characterization,” Constr. Build. Mater., vol. 239, p. 117669, Apr. 2020, doi: 10.1016/j.conbuildmat.2019.117669.
[10] O. Ige and H. Danso, “Physico-mechanical and thermal gravimetric analysis of adobe masonry units reinforced with plantain pseudo-stem fibres for sustainable construction,” Constr. Build. Mater., vol. 273, p. 121686, Mar. 2021, doi: 10.1016/j.conbuildmat.2020.121686.
[11] M. M. Salih, A. I. Osofero, and M. S. Imbabi, “Critical review of recent development in fiber reinforced adobe bricks for sustainable construction,” Front. Struct. Civ. Eng., vol. 14, no. 4, pp. 839–854, Aug. 2020, doi: 10.1007/s11709-020-0630-7.
[12] I. M. G. Bertelsen, L. J. Belmonte, G. Fischer, and L. M. Ottosen, “Influence of synthetic waste fibres on drying shrinkage cracking and mechanical properties of adobe materials,” Constr. Build. Mater., vol. 286, p. 122738, Jun. 2021, doi: 10.1016/j.conbuildmat.2021.122738.
[13] G. L. Sivakumar Babu, A. K. Vasudevan, and S. Haldar, “Numerical simulation of fiber-reinforced sand behavior,” Geotext. Geomembranes, vol. 26, no. 2, pp. 181–188, Apr. 2008, doi: 10.1016/j.geotexmem.2007.06.004.
[14] D. H. Gray and H. Ohashi, “Mechanics of Fiber Reinforcement in Sand,” J. Geotech. Eng., vol. 109, no. 3, pp. 335–353, Mar. 1983, doi: 10.1061/(ASCE)0733-9410(1983)109:3(335).
[15] M. H. Maher and D. H. Gray, “Static Response of Sands Reinforced with Randomly Distributed Fibers,” J. Geotech. Eng., vol. 116, no. 11, pp. 1661–1677, Nov. 1990, doi: 10.1061/(ASCE)0733-9410(1990)116:11(1661).
[16] R. L. Michalowski and A. Zhao, “Failure of Fiber-Reinforced Granular Soils,” J. Geotech. Eng., vol. 122, no. 3, pp. 226–234, Mar. 1996, doi: 10.1061/(ASCE)0733-9410(1996)122:3(226).
[17] G. Ranjan, R. M. Vasan, and H. D. Charan, “Probabilistic Analysis of Randomly Distributed Fiber-Reinforced Soil,” J. Geotech. Eng., vol. 122, no. 6, pp. 419–426, Jun. 1996, doi: 10.1061/(ASCE)0733-9410(1996)122:6(419).
[18] M. R. Mirjalili, S. Fattahi, and M. S. Ahmadi, “Interfacial Adhesion between Textile Fibers and Clay Mortar,” J. Mater. Civ. Eng., vol. 35, no. 2, Feb. 2023, doi: 10.1061/(ASCE)MT.1943-5533.0004547.
[19] T. O. Al-Refeai, “Behavior of granular soils reinforced with discrete randomly oriented inclusions,” Geotext. Geomembranes, vol. 10, no. 4, pp. 319–333, Jan. 1991, doi: 10.1016/0266-1144(91)90009-L.
[20] N. C. Consoli, J. P. Montardo, P. D. M. Prietto, and G. S. Pasa, “Engineering Behavior of a Sand Reinforced with Plastic Waste,” J. Geotech. Geoenvironmental Eng., vol. 128, no. 6, pp. 462–472, Jun. 2002, doi: 10.1061/(ASCE)1090-0241(2002)128:6(462).
[21] N. C. Consoli, M. D. T. Casagrande, P. D. M. Prietto, and A. Thomé, “Plate Load Test on Fiber-Reinforced Soil,” J. Geotech. Geoenvironmental Eng., vol. 129, no. 10, pp. 951–955, Oct. 2003, doi: 10.1061/(ASCE)1090-0241(2003)129:10(951).
[22] S. R. Kaniraj and V. G. Havanagi, “Behavior of Cement-Stabilized Fiber-Reinforced Fly Ash-Soil Mixtures,” J. Geotech. Geoenvironmental Eng., vol. 127, no. 7, pp. 574–584, Jul. 2001, doi: 10.1061/(ASCE)1090-0241(2001)127:7(574).
[23] A. Kumar, B. S. Walia, and A. Bajaj, “Influence of Fly Ash, Lime, and Polyester Fibers on Compaction and Strength Properties of Expansive Soil,” J. Mater. Civ. Eng., vol. 19, no. 3, pp. 242–248, Mar. 2007, doi: 10.1061/(ASCE)0899-1561(2007)19:3(242).
[24] A. Kumar, B. S. Walia, and J. Mohan, “Compressive strength of fiber reinforced highly compressible clay,” Constr. Build. Mater., vol. 20, no. 10, pp. 1063–1068, Dec. 2006, doi: 10.1016/j.conbuildmat.2005.02.027.
[25] M. H. Maher and Y. C. Ho, “Mechanical Properties of Kaolinite/Fiber Soil Composite,” J. Geotech. Eng., vol. 120, no. 8, pp. 1381–1393, Aug. 1994, doi: 10.1061/(ASCE)0733-9410(1994)120:8(1381).
[26] K. V. Maheshwari, A. K. Desa, and C. H. Solanki, “Performance of fiber reinforced clayey soil,” Electron. J. Geotech. Eng., vol. 16, pp. 1067–1082, 2011.
[27] R. L. Santoni and S. L. Webster, “Airfields and Roads Construction Using Fiber Stabilization of Sands,” J. Transp. Eng., vol. 127, no. 2, pp. 96–104, Apr. 2001, doi: 10.1061/(ASCE)0733-947X(2001)127:2(96).
[28] A. Diambra, E. Ibraim, D. Muir Wood, and A. R. Russell, “Fibre reinforced sands: Experiments and modelling,” Geotext. Geomembranes, vol. 28, no. 3, pp. 238–250, Jun. 2010, doi: 10.1016/j.geotexmem.2009.09.010.
[29] N. C. Consoli, M. A. Vendruscolo, A. Fonini, and F. D. Rosa, “Fiber reinforcement effects on sand considering a wide cementation range,” Geotext. Geomembranes, vol. 27, no. 3, pp. 196–203, Jun. 2009, doi: 10.1016/j.geotexmem.2008.11.005.
[30] K. Punthutaecha, A. J. Puppala, S. K. Vanapalli, and H. Inyang, “Volume Change Behaviors of Expansive Soils Stabilized with Recycled Ashes and Fibers,” J. Mater. Civ. Eng., vol. 18, no. 2, pp. 295–306, Apr. 2006, doi: 10.1061/(ASCE)0899-1561(2006)18:2(295).
[31] A. J. Puppala and C. Musenda, “Effects of Fiber Reinforcement on Strength and Volume Change in Expansive Soils,” Transp. Res. Rec. J. Transp. Res. Board, vol. 1736, no. 1, pp. 134–140, Jan. 2000, doi: 10.3141/1736-17.
[32] C. Tang, B. Shi, W. Gao, F. Chen, and Y. Cai, “Strength and mechanical behavior of short polypropylene fiber reinforced and cement stabilized. clayey soil,” Geotext. Geomembranes, vol. 25, no. 3, pp. 194–202, Jun. 2007, doi: 10.1016/j.geotexmem.2006.11.002.
[33] M. W. Tham et al., “Tensile properties prediction of natural fibre composites using rule of mixtures: A review,” J. Reinf. Plast. Compos., vol. 38, no. 5, pp. 211–248, 2019, doi: 10.1177/0731684418813650.
[34] S. Fu, “Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers,” Compos. Sci. Technol., vol. 56, no. 10, pp. 1179–1190, 1996, doi: 10.1016/S0266-3538(96)00072-3.
[35] A. Kelly and W. R. Tyson, “Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum,” J. Mech. Phys. Solids, vol. 13, no. 6, pp. 329–350, Dec. 1965, doi: 10.1016/0022-5096(65)90035-9.
[36] J. L. Thomason and M. A. Vlug, “Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: 1. Tensile and flexural modulus,” Compos. Part A Appl. Sci. Manuf., vol. 27, no. 6, pp. 477–484, Jan. 1996, doi: 10.1016/1359-835X(95)00065-A.
[37] A. C. N. Singleton, C. A. Baillie, P. W. R. Beaumont, and T. Peijs, “On the mechanical properties, deformation and fracture of a natural fibre/recycled polymer composite,” Compos. Part B Eng., vol. 34, no. 6, pp. 519–526, Sep. 2003, doi: 10.1016/S1359-8368(03)00042-8.
[38] Ş. Yetgin, Ö. ÇAVDAR, and A. Çavdar, “The effects of the fiber contents on the mechanic properties of the adobes,” Constr. Build. Mater., vol. 22, no. 3, pp. 222–227, Mar. 2008, doi: 10.1016/j.conbuildmat.2006.08.022.
[39] H. Mohammadi, A. Eslami, and R. Morshed, “Amirkabir Journal of Civil Engineering Experimental evaluation into improving the mechanical properties of adobe using palm fibers,” Civ. Eng, vol. 54, no. 6, pp. 465–468, 2022, doi: 10.22060/ceej.2021.19652.7222.
[40] R. Illampas, V. G. Loizou, and I. Ioannou, “Effect of Straw Fiber Reinforcement on the Mechanical Properties of Adobe Bricks,” in Poromechanics VI, Jul. 2017, pp. 1331–1338, doi: 10.1061/9780784480779.165.
نشریه نساجی و پلیمر