[1] S. Debnath and M. Madhusoothanan, “Studies on compression behaviour of polypropylene needle punched nonwoven fabrics under wet condition”, Fiber Polym., vol. 14, no. 5, pp. 854-859, 2013.
[2] E. Çinçik and E. Koç, “The effect of blend ratio and process parameters on tensile properties of polyester/viscose blended needle-punched nonwovens”, Fiber Polym., vol. 14, no. 6, pp. 1040-1049, 2013.
[3] A. Rawal, S. Anand, and T. Shah, “Optimization of parameters for the production of needle punched nonwoven geotextiles”, J. Ind. Text., vol. 37, no. 4, pp. 341-356, 2008.
[4] C.F.J. Kuo, T.L. Su, and C.P. Tsai, “Optimization of the needle punching process for the nonwoven fabrics with multiple quality characteristics by grey-based taguchi methodˮ, Fiber Polym., vol. 8, no. 6, pp. 654-664, 2007.
[5] A. Rawal and R. Anandjiwala, “Relationship between process parameters and properties of multifunctional needle punched geotextilesˮ, J. Ind. Text., vol. 35, no. 4, pp. 271-285, 2006.
[6] M. Miao, H.E. Glassey, and M. Rastogi, “An experimental study of the needled nonwoven process: part III: fiber damage due to needling”, Text. Res. J., vol. 74, no. 6, pp. 485-490, 2004.
[7] J.W.S. Hearle and A.T. Purdy, “2—the influence of the depth of needle penetration on needled-fabric structure and tensile properties”, J. Text. Inst., vol. 65, no. 1, pp. 6-12, 1974.
[8] J.W.S. Hearle, M.A.I. Sultan, and T.N. Choudhari, “9—A study of needled fabrics. Part II: effects of the needling process”, J. Text. Inst., vol. 59, no. 2, pp. 103-116, 1968.
[9] E. Saberi, S.S. Najar, S.B. Abdellahi, and Z. Soltanzadeh, “A hyperelastic approach for finite element modelling puncture resistance of needle punched nonwoven geotextiles”, Fiber Polym., vol. 18, no. 8, pp. 1623-1628, 2017.
[10] H. Mashroteh, E. Ekhtiyari, S. Fattahi, A. Aflatounian, H. Rahimi, and M. Sadeghi-Sadeghabad, “Behavior analysis of the nonwoven needle-punched polyester fabrics due to compression loading”, J. Text. Polym., vol. 7, no. 1, pp. 33-43, 2019.
[11] J.H. Lin, T.T. Li, and C.W. Lou, “Puncture-resisting, sound-absorbing and thermal-insulating properties of polypropylene-selvages reinforced composite nonwovens”, J. Ind. Text., vol. 45, no. 6, pp. 1477-1489, 2016.
[12] T.T. Li, R. Wang, C.W. Lou, and J.H. Lin, “Static and dynamic puncture behaviors of compound fabrics with recycled high-performance Kevlar fibers”, Compos. Part B-Eng., vol. 59, pp. 60-66, 2014.
[13] T.T. Li, R. Wang, C.W. Lou, C.H. Huang, and J.H. Lin, “Mechanical and physical properties of puncture-resistance plank made of recycled selvages”, Fiber  Polym., vol. 14, no. 2, pp. 258-265, 2013.
[14] A.S. Askari, S.S. Najar, and Y.A. Vaghasloo, “Study the effect of test speed and fabric weight on puncture behavior of polyester needle punched nonwoven geotextiles”, J. Eng. Fiber. Fabr., vol. 7, no. 3, pp. 1-5, 2012.
[15] Y. Termonia, “Puncture resistance of fibrous structures”, Int. J. Impact. Eng., vol. 32, no. 9, pp. 1512-1520, 2006.
[16] T.K. Ghosh, “Puncture resistance of pre-strained geotextiles and its relation to uniaxial tensile strain at failure”, Geotext. Geomembranes, vol. 16, no. 5, pp. 293-302, 1998.
[17] I. Hossain, I.A. Choudhury, A.B. Mamat, and A. Hossain, “Predicting the colour properties of viscose knitted fabrics using soft computing approaches”, J. Text. Inst., vol. 108, no. 10, pp. 1689-1699, 2017.
[18] I. Hossain, A. Hossain, and I.A. Choudhury, “Color strength modeling of viscose/Lycra blended fabrics using a fuzzy logic approach”, J. Eng. Fiber. Fabr., vol. 10, no. 1, pp. 158-168, 2015.
[19] A. Majumdar and A. Ghosh, “Yarn strength modelling using fuzzy expert system”, J. Eng. Fiber. Fabr., vol. 3, no. 4, 2008.
[20] B. Jaouachi and F. Khedher, “Evaluating sewing thread consumption of jean pants using fuzzy and regression methods”, J. Text. Inst., vol. 104, no. 10, pp. 1065-1070, 2013.
[21] H.T. Choi, S.H. Jeong, S.R. Kim, J.Y. Jaung, and S.H. Kim, “Detecting fabric defects with computer vision and fuzzy rule generation. Part II: defect identification by a fuzzy expert system”, Text. Res. J., vol. 71, no. 7, pp. 563-573, 2001.
[22] M.L. Huang, Y.H. Hung, and W.C. Kuo, “Combining taguchi method with fuzzy inference on process optimization for fiber manufacturing”, Fiber Polym., vol. 16, no. 12, pp. 2670-2681, 2015.
[23] E. Haghighat, M.S. Johari, and S.M. Etrati, “Study of the hairiness of polyester-viscose blended yarns. Part IV-predicting yarn hairiness using fuzzy logic”, Fibre. Text. East. Eur., vol. 3, no. 92, pp. 39-42, 2012.
[24] N. Dehghan-Manshadi and M. Hadizadeh, “Applying fuzzy logic model for bending rigidity evaluation of woven fabrics”, J. Text. Polym., vol. 7, no. 1, pp. 61-68, 2019.
[25] M. Kabbari, F. Fayala, A. Ghith, and N. Liouane, “Predicting stain repellency characteristics of knitted fabrics using fuzzy modeling and surface response methodology”, J. Text. Inst., vol. 108, no. 5, pp. 683-691, 2017.
[26] S.E.G. Jeguirim, A.B. Dhouib, M. Sahnoun, M. Cheikhrouhou, L. Schacher, and D. Adolphe, “The use of fuzzy logic and neural networks models for sensory properties prediction from process and structure parameters of knitted fabrics”, J. Intell. Manuf., vol. 22, no. 6, pp. 873-884, 2011.
[27] F. Abidi, T. Harizi, S. Msahli, and F. Sakli, “Modelling of Tunisian hand-made carpet resilience under long static loading using fuzzy expert system”, Fiber Polym., vol. 18, no. 9, pp. 1810-1815, 2017.
[28] S.N. Sivanandam, S. Sumathi, and S.N. Deepa, “Introduction to fuzzy logic using MATLAB”, vol. 1, Berlin: Springer, 2007.
[29] E. Haghighat, S.S. Najar, and S.M. Etrati, “The prediction of needle penetration force in woven denim fabrics using soft computing models”, J. Eng. Fiber. Fabr., vol. 9, no. 4, 2014.