[1] Z. M. Huang, Y. Z. Zhang, M. Kotaki, and S. Ramakrishna, "A
review on polymer nanofibers by electrospinning and their
applications in nanocomposites", Compos, Sci. Technol., vol. 63,
pp. 2223–2253, 2003.
[2] D Li and Y. N. Xia, "Electrospinning of nanofibers: Reinventing
the wheel? ", Adv. Mater., vol. 16, pp. 1151-1170, 2004.
[3] S. V. Fridrikh, J. H. Yu, M. P. Brenner, and G. C. Rutledge,
"Controlling the Fiber Diameter during Electrospinning", Phys.
Rev. Lett., vol. 90, p. 144502, 2003.
[4] A. Valipouri, S. A. H. Ravandi, and A. Pishevar, "A novel method
for manufacturing nanofibers", Fiber. Polym., vol. 14, pp. 941-949,
2013.
[5] C. X. Zhang, X. Y. Yuan, L. L. Wu, Y. Han, and J. Sheng, "Study
on morphology of electrospun poly(vinyl alcohol) mats", Eur.
Polym. J., vol. 41 pp. 423-432, 2005.
[6] W. E. Teo and S. Ramakrishna, "A review on electrospinning
design and nanofibre assemblies", Nanotechnology, vol. 17 pp.
R89–106, 2006
[7] N. Bhardwaj and S. C. Kundu, "Electrospinning: A fascinating
fiber fabrication technique, " Biotechnol. Adv., vol. 28 pp. 325-
347, 2010.
[8] W. K. Son, J. H. Youk, T. S. Lee, and W. H. Park, "The effects of
solution properties and polyelectrolyte on electrospinning of
ultrafine poly(ethylene oxide) fibers", polymer, vol. 45, pp. 2959–
2966, 2004.
[9] T. Lin, H. Wang, H. Wang, and X. Wang, "The charge effect of
cationic surfactants on the elimination of fibre beads in the
electrospinning of polystyrene ", Nanotechnology vol. 15, p. 1375
2004.
[10] C. Huang, S. Chen, C. Lai, D. H. Reneker, H. Qiu, Y. Ye, et al.,
"Electrospun polymer nanofibres with small diameters ",
Nanotechnology vol. 17 pp. 1558-1563, 2006.
[11] F. Dabirian, "Experimental and Theoretical Investigation on the
Nanofiber Production by Electrocentrifuge Spinning," PhD,
Department of Textile Engineering, Isfahan University of
Technology, 2012.
[12] F. Dabirian, S. A. H. Ravandi, and A. R. Pishevar, "Investigation
of Parameters Affecting PAN Nanofiber Production Using
Electrical and Centrifugal Forces as a Novel Method ", Curr.
Nanosci., vol. 6, pp. 545-552, 2010.
[13] M. R. Badrossamay, H. A. McIlwee, J. A. Goss, and K. K. Parker,
"Nanofiber Assembly by Rotary Jet-Spinning", Nano Lett., vol. 10,
pp. 2257-2261, 2011/12/12.
[14] K. Sarkar, C. Gomez, S. Zambrano, M. Ramirez, E. d. Hoyos, H.
Vasquez, et al., "Electrospinning to forcespinningTM", Mater.
Today, vol. 13, pp. 12-14, 2010.
[15] Meng-Hua Xiong, Yan Bao, Xian-Zhu Yang, Yan-Hua Zhu, and J.
Wang, "Delivery of antibiotics with polymeric particles", Adv.
Drug Deliver. Rev., vol. 78, pp. 63–76, 2014.
[16] Matthew A. Hood, Margherita Mari, and R. Muñoz-Espí,
"Synthetic Strategies in the Preparation of Polymer/Inorganic
Hybrid Nanoparticles", Materials, vol. 7, pp. 4057-4087, 2014.
[17] J. Siepmann, R. A. Siegel, and M. J. Rathbone, Eds., Fundamentals
and Applications of Controlled Release Drug Delivery (Advances
in Delivery Science and Technology). Springer US, 2012.
[18] A. Jaworek and A. T. Sobczyk, "Electrospraying route to
nanotechnology: An overview", J. Electrostat., vol. 66, pp. 197-
219, 2008.
[19] A. Valipouri, S. A. H. Ravandi, and A. Pishevar, "Optimization of
the Parameters Involved in Fabrication of Solid State Polymerized
Polyamide (SSP PA66) Nanofibers via an Enhanced Electrocentrifuge
Spinning", J. Ind. Text., vol. 45, pp. 368-386, 2015.