نوع مقاله : مقاله پژوهشی
[1] A.P. Mouritz, M.K. Bannister, and P.J. Falzon, “Review of applications for advanced three dimensional fiber textile composites”, Compos. A, vol. 30, no. 12, pp. 1445-1461, 1999.
[2] R. Kamiya, B.A. Cheeseman, and P. Popper, “Some recent advances in the fabrication and design of three dimensional textile preforms: a reviewˮ, Compos. Sci. Technol., vol. 60, no. 1, pp. 33-47, 2000. [3] K. Bilisik, “Multiaxis three-dimensional weaving for composites: a review”, Text. Res. J., vol. 82, no. 7, pp. 725-743, 2012. [4] J. Hu, 3D Fibrous Assemblies: Properties, Applications and Modelling of Three-Dimensional Textile Structures, 1st ed, Woodhead Publishing, 2008. [5] A.W. Van Vuure, J.A. Ivens, and I. Verpoest, “Mechanical properties of composite panels based on woven sandwich fabric preforms”, Compos. A, vol. 31, pp. 671-680, 2000. [6] A. Mirdehghan, H. Nosraty, M.M. Shokrieh, M.
Akhbari, and R. Ghasemi, “Micro-mechanical modelling of the compression strength of threedimensional integrated woven sandwich compositesˮ, J. Ind. Text., vol. 48, no. 9, pp. 1399-1419, 2019. [7] M. Li, S. Wang, and W. Zhang, “Effect of structure on the mechanical behaviors of three-dimensional spacer fabric composites”, Appl. Compos. Mater., vol. 16, pp. 1-14, 2009. [8] M. Karahan, H. Gul, and N. Karahan, “Static behavior of three-dimensional integrated core sandwich composites subjected to three-point bendingˮ, J. Reinf. Plast. Compos., vol. 32, no. 9, pp. 664-678, 2013. [9] S.W. Choi, M. Li, and W.I. Lee, “Analysis of buckling load of glass fiber/epoxy-reinforced plywood and its temperature dependenceˮ, J. Compos. Mater., vol. 48, no. 18, pp. 2191-2206, 2014. [10] M.G. Toribio and S.M. Spearing, “Compressive response of notched glass-fiber epoxy/honeycomb sandwich panels”, Compos. A, vol. 32, no. 6, pp. 859870, 2001. [11] C.H. Park, W.I. Lee, and W.S. Han, “Multi-constraint optimization of composite structures manufactured by resin transfer molding process”, J. Compos. Mater., vol. 39, no. 4, pp. 347-374, 2005. [12] J.M. Mirazo and S.M. Spearing, “Damage modeling of notched graphite/epoxy sandwich panels in compressionˮ, Appl. Compos. Mater., vol. 8, no. 3, pp. 191-216, 2001. [13] J.G. Ratcliffe and J.R. Reeder, “Sizing a single cantilever beam specimen for characterizing facesheet-core debonding in sandwich structureˮ, J. Compos. Mater., vol. 45, no. 25, pp. 2669-2684, 2011. [14] C. Berggreen, B.C. Simonsen, and K.K. Borum, “Experimental and numerical study of interface crack propagation in foam-cored sandwich beamsˮ, J. Compos. Mater., vol. 41, no. 4, pp. 493-520, 2007.
[2] R. Kamiya, B.A. Cheeseman, and P. Popper, “Some recent advances in the fabrication and design of three dimensional textile preforms: a reviewˮ, Compos. Sci. Technol., vol. 60, no. 1, pp. 33-47, 2000. [3] K. Bilisik, “Multiaxis three-dimensional weaving for composites: a review”, Text. Res. J., vol. 82, no. 7, pp. 725-743, 2012. [4] J. Hu, 3D Fibrous Assemblies: Properties, Applications and Modelling of Three-Dimensional Textile Structures, 1st ed, Woodhead Publishing, 2008. [5] A.W. Van Vuure, J.A. Ivens, and I. Verpoest, “Mechanical properties of composite panels based on woven sandwich fabric preforms”, Compos. A, vol. 31, pp. 671-680, 2000. [6] A. Mirdehghan, H. Nosraty, M.M. Shokrieh, M.
Akhbari, and R. Ghasemi, “Micro-mechanical modelling of the compression strength of threedimensional integrated woven sandwich compositesˮ, J. Ind. Text., vol. 48, no. 9, pp. 1399-1419, 2019. [7] M. Li, S. Wang, and W. Zhang, “Effect of structure on the mechanical behaviors of three-dimensional spacer fabric composites”, Appl. Compos. Mater., vol. 16, pp. 1-14, 2009. [8] M. Karahan, H. Gul, and N. Karahan, “Static behavior of three-dimensional integrated core sandwich composites subjected to three-point bendingˮ, J. Reinf. Plast. Compos., vol. 32, no. 9, pp. 664-678, 2013. [9] S.W. Choi, M. Li, and W.I. Lee, “Analysis of buckling load of glass fiber/epoxy-reinforced plywood and its temperature dependenceˮ, J. Compos. Mater., vol. 48, no. 18, pp. 2191-2206, 2014. [10] M.G. Toribio and S.M. Spearing, “Compressive response of notched glass-fiber epoxy/honeycomb sandwich panels”, Compos. A, vol. 32, no. 6, pp. 859870, 2001. [11] C.H. Park, W.I. Lee, and W.S. Han, “Multi-constraint optimization of composite structures manufactured by resin transfer molding process”, J. Compos. Mater., vol. 39, no. 4, pp. 347-374, 2005. [12] J.M. Mirazo and S.M. Spearing, “Damage modeling of notched graphite/epoxy sandwich panels in compressionˮ, Appl. Compos. Mater., vol. 8, no. 3, pp. 191-216, 2001. [13] J.G. Ratcliffe and J.R. Reeder, “Sizing a single cantilever beam specimen for characterizing facesheet-core debonding in sandwich structureˮ, J. Compos. Mater., vol. 45, no. 25, pp. 2669-2684, 2011. [14] C. Berggreen, B.C. Simonsen, and K.K. Borum, “Experimental and numerical study of interface crack propagation in foam-cored sandwich beamsˮ, J. Compos. Mater., vol. 41, no. 4, pp. 493-520, 2007.
[15] A.W. Van Vuure, J. Pflug, and J.A. Ivens, “Modelling the core properties of composite panels based on woven sandwich fabric preforms”, Compos. Sci. Technol., vol. 60, pp. 1263-1276, 2000. [16] H. Judawisastra, J. Ivens, and I. Verpoest, “Determination of core shear properties of 3D woven sandwich compositesˮ, Plast. Rubber Compos., vol. 28, no. 9, pp. 452-457, 1999. [17] D.S. Li, N. Jiang, L. Jiang, and C.Q. Zhao, “Static and dynamic mechanical behavior of 3D integrated woven spacer composites with thickened face sheetsˮ, Fiber Polym, vol. 17, no. 3, pp. 460-468, 2016. [18] Y. Hu, W.X. Li, H.L. Fan, and N. Kuang, “Experimental investigations on the failures of woven textile sandwich panelsˮ, J. Thermoplast. Compos. Mater., vol. 30, no. 2, 2015. http://dx.doi.org/10.1177/0892705715598357. [19] C. Zhao, D. Li, T. Ge, L. Jiang, and N. Jiang, “Experimental study on the compression properties and failure mechanism of 3D integrated woven spacer
compositesˮ, Mater. Design, vol. 56, pp. 50–59, 2014. [20] S. Wang, M. Li, Z. Zhang, and B. Wu, “Mechanical reinforcement of three-dimensional spacer fabric compositesˮ, Mater. Sci. Forum, vol. 65, pp. 26042607, 2010. [21] M. Sadighi and S.A. Hosseini, “Finite element simulation and experimental study on mechanical behavior of 3d woven glass fiber composite sandwich panelsˮ, Compos. B, vol. 55, pp. 158-166, 2013. [22] M. Barikani, “Investigation of the edgewise compression properties of 3D woven glass fibre composites (in Persian)”, Msc Thesis, Dept. Text. Eng., Amirkabir University of Technology, Tehran, Iran, 2017. [23] A. Kus, I. Durgun, and R. Ertan, “Experimental study on the flexural properties of 3D integrated woven spacer composites at room and subzero temperatures”, J. Sandw. Struct. Mater., vol. 20, no. 5, pp. 517-530, 2018.
compositesˮ, Mater. Design, vol. 56, pp. 50–59, 2014. [20] S. Wang, M. Li, Z. Zhang, and B. Wu, “Mechanical reinforcement of three-dimensional spacer fabric compositesˮ, Mater. Sci. Forum, vol. 65, pp. 26042607, 2010. [21] M. Sadighi and S.A. Hosseini, “Finite element simulation and experimental study on mechanical behavior of 3d woven glass fiber composite sandwich panelsˮ, Compos. B, vol. 55, pp. 158-166, 2013. [22] M. Barikani, “Investigation of the edgewise compression properties of 3D woven glass fibre composites (in Persian)”, Msc Thesis, Dept. Text. Eng., Amirkabir University of Technology, Tehran, Iran, 2017. [23] A. Kus, I. Durgun, and R. Ertan, “Experimental study on the flexural properties of 3D integrated woven spacer composites at room and subzero temperatures”, J. Sandw. Struct. Mater., vol. 20, no. 5, pp. 517-530, 2018.
)