[1] J. Oh, S. Cho, C. Lee, J. Kim, and B. Choi, “The fabrication of film-type frequency selective surface (FSS) attachable to window glass using inkjet printing techniqueˮ, URSI General Assembly, Chicago, 7-16, 2008. [2] Y. Liu, T. Cui, and K. Varahramyan, “All-polymer capacitor fabricated with inkjet printing techniqueˮ, Solid-State Electron., vol. 47, no. 9, pp. 1543-1548, 2003. [3] J. Lim, J. Kim, Y.J. Yoon, H. Kim, H.G. Yoon, S.N. Lee, and J. Kim, “All-inkjet-printed metal-insulatormetal (MIM) capacitorˮ, Curr. Appl. Phys., vol. 12, pp. e14-e17, 2012. [4] Y. Li, R. Torah, S. Beeby, and J. Tudor, “An all-inkjet printed flexible capacitor for wearable applicationsˮ, In: 2012 Symposium on Design, Test, Integration, and Packaging of MEMS/MOEMS (DTIP 2012), Cannes, France, pp. 192-195, 2012. [5] Micro piezo white paper. Available: https://www.scribd.com/document/258821654/ Micro-Piezo-White-Paper-pdfaccessed May. 2018. [6] K. Yoshimura, M. Kishimoto, and T. Suemune, “Inkjet printing technologyˮ, OKI Tech. Rev., Vol. 64, pp. 6164, 1998. [7] L. Yang, A. Rida, R. Vyas, and M.M. Tentzeris, “Novel “enhanced-cognition” RFID architectures on organic/paper low-cost substrates utilizing inkjet technologiesˮ, Int. J. Antenn. Propag., 2007. [8] J. Halls, “Inkjet printing of PLED displaysˮ, Inf. Di., vol. 2, no. 05, 11, 2005. [9] D. Kim, S. Jeong, S. Lee, B.K. Park, and J. Moon, “Organic thin film transistor using silver electrodes by the inkjet printing technologyˮ, Thin Solid Films, vol.
Capacitor 515, no. 19, pp. 7692-7696, 2007. [10] V.G. Shah and D.B. Wallace, “Low-cost solar cell fabrication by drop-on-demand inkjet printingˮ, In: Proceedings of IMAPS 37th Annual International Symposium on Microelectronics, Long Beach, CA, USA, pp. 14-18, 2004. [11] M. Mäntysalo and P. Mansikkamäki, “An inkjetdeposited antenna for 2.4 GHz applicationsˮ, AEUInt. J. Electron. Comm., vol. 63, no. 1, pp. 31-35, 2009. [12] R. Das, K. Ghaffarzadeh, and X. He, “Printed & organic electronics forecasts, players & opportunities”, 2017–2027, ID TechEx report, 2017. [13] Y. Lee, J.R. Choi, K.J. Lee, N.E. Stott, and D. Kim, “Large-scale synthesis of copper nanoparticles by chemically controlled reduction for applications of inkjet-printed electronics”, Nanotechnology, vol. 19, no. 41, pp. 415604, 2008. [14] S.M. Bidoki, D. McGorman, D.M. Lewis, M. Clark, G. Horler, and R.E. Miles, “Inkjet printing of conductive patterns on textile fabrics”, AATCC Review, vol. 5, no. 6, pp. 17-22, 2005. [15] S.M. Bidoki, D.M. Lewis, M. Clark, A. Vakorov, P.A. Millner, and D. McGorman, “Inkjet fabrication of electronic components”, J. Micromech. Microeng., vol. 17, no. 5, pp. 967, 2007. [16] B. Derby and N. Reis, “Inkjet printing of highly loaded particulate suspensions”, MRS Bull., vol. 28, no. 11, pp. 815-818, 2003. [17] S.M. Bidoki, J. Nouri, and A.A. Heidari, “Inkjet deposited circuit components”, J. Micromech. Microeng., vol. 20, no. 5, pp. 055023, 2010. [18] I.J. Bahl, “Lumped elements for RF and microwave
circuits”, Artech House, USA, 2003. [19] S. Sankaralingam and B. Gupta, “Determination of dielectric constant of fabric materials and their use as substrates for design and development of antennas for wearable applications”, Instrum. Meas., IEEE Transactions on, vol. 59, no. 12, pp. 3122-3130, 2010. [20] L. Yang, A. Rida, R. Vyas, and M.M. Tentzeris, “RFID tag and RF structures on a paper substrate using inkjetprinting technology”, Microw. Theory Techniques, IEEE Transactions on, vol. 55, no. 12, pp. 2894-2901, 2007. [21] B.S. Cook, J.R. Cooper, and M.M. Tentzeris, “Multilayer RF capacitors on flexible substrates utilizing inkjet printed dielectric polymersˮ, Microw. Wirel. Components Lett., IEEE, vol. 23, no. 7, pp. 353-355, 2013. [22] G. McKerricher, J. Gonzalez Perez, and A. Shamim, “Fully inkjet printed RF inductors and capacitors using polymer dielectric and silver conductive ink with through viasˮ, Elec. Devices, IEEE Transactions on, vol. 62, no. 3, pp. 1002-1009, 2015. [23] G. McKerricher, M. Vaseem, and A. Shamim, “Fully inkjet-printed microwave passive electronicsˮ, Microsy. Nanoeng., 3, 16075, 2017. [24] F.P. Casares-Miranda, P. Otero, E. Marquez-Segura, and C. Camacho-Penalosa, “Wire bonded interdigital capacitor”, IEEE Microw. Wirel. Components Lett., vol. 15, no. 10, pp. 700-702, 2005. [25] A. Manut, A.S. Zoolfakar, N.A. Muhammad, M. and Zolkapli, “Characterization of Inter Digital capacitor for water level sensor”, In: IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2011), pp. 359363, 2011.
Journal of Textiles and Polymers