Study on physicochemical and thermal properties of hydrolyzed guar gum (Cyamopsis tetragonoloba)

Document Type : Original Article

Authors
1 دانشگاه صنعتی امیرکبیر، دانشکده نساجی، آزمایشگاه سازه های نانولیفی
2 گروه مهندسی بافت و پزشکی بازساختی (مرکز تحقیقات سلولی و مولکولی)، دانشکده فناوری‌های نوین پزشکی، دانشگاه علوم پزشکی ایران، تهران، ایران
10.48302/jtp.2026.584564.1353
Abstract
The need to improve the GG viscosity and solubility at high concentrations across different industries has led to the development of modification methods. In this study, hydrolyzed guar gum (HGG) was prepared by controlled acid hydrolysis of guar gum using a HCL solution (~3 M) in an ethanol-water slurry at RT for 3h (%80 recovery yield). After depolymerization, a remarkable reduction in the different relative MWs of native guar gum, and values of 8.9578×104, 1.5981×105, and 4.2381×105 (g/mol) for Mn, Mw and Mz, respectively, from GPC was obtained for HGG. Using GPC data, the degree of scission of HGG chains was calculated to be 30. HPLC analysis showed the changes in the total monosaccharide composition of guar gum before (34.34% galactose, 64.56% mannose) and after (42.68% galactose, 27.04% mannose) acid hydrolysis. Apparent viscosity of 1% (w/v) HGG solution was 5.17 ±0.29 cP, which is much lower than GG solution (5917 ±144 cP), resulting in enhanced solubility of HGG aqueous solutions. Based on results, hydrolysis treatment of GG gives rise to higher negative ζ-potentials (-3.55 ±0.07 mV) and lower surface tension (44 ± 0.214 mN/m). FTIR, 1H-NMR, and XRD spectroscopy confirmed the successful production of HGG. DSC analysis for HGG showed the appearance of an exothermic peak at 216°C with E= 68.32 J/g, indicating faster degradation of polymer chains caused by molecular weight reduction and chain shortening due to hydrolysis. These results suggest that hydrolyzed galactomannan could have potential applications in biomedical and food fields due to its improved solubility properties.
Keywords
Subjects