Open Access and Free of Charge

Document Type : Original Article

Authors

Department of Textile Engineering, Yazd University, Yazd, Iran.

Abstract

Conventional methods of hair dyeing involve the use of chemical materials that result in unpleasant side effects, such as breakage of hair and cancer. A need was felt to formulate a dye containing plant products which is safe for use and does not have the problems of hypersensitive reactions. In this study, formulations containing natural hair colorants with madder dye and additives like herbal oils (almond, olive and coconut), ammonia and lemon juice were prepared. Response surface method was used to analyze color strength of hair colorant as dependent variable. Dye concentration, bath temperature and additives have been selected as independent variables. Color strength predictive model of natural hair colorants with madder dye is provided and this model has a high coefficient of determination. Also, it was indicated that, bath temperature has a great effect on enhancing the color strength of natural hair colorant. The optimization conditions of dyeing process parameters for polyhedral hair colorant production using response surface methodology were identified.

Keywords

[1]  N. Yadav, R. Yadav, and M.D. Kharya, “Preparation and evaluation of natural hair colorant”, World J. Pharm., vol. 3, no. 4, pp. 1314-1319, 2014.  [2]  Z. Shahi, M. Khajeh Mehrizi, and M. Hadizadeh, “Review on the types of hair colorant, structure and their characteristics”, J. Stud. Color World, vol. 7, no. 1, pp. 85-103, 2017.  [3]  P. Suvarna, N. Tanuja, P. Deepak, and R.P. Pingle, “Preparation, evaluation and hairdyeing activity of herbal hair oil and comparison with marketed dye”, World J. Pharm. Res., vol. 4, no. 8, pp. 1469-1478, 2015. [4]  J. Uttara, B. Swapnali, and U. Mohini, “Formulation and preliminary evaluation of natural hair colorant”, Int. J. Pharm. Bio. Sci., vol. 1, no. 2, pp. 1-5, 2010. [5]  S. Kumari, K. Kumari, S. Pratap, and P. Nainwal, “Dyeing effect of colour obtain from bark of morus alba on selected fibers”, Int. J. Pharm. Chem. Res., vol. 2, no. 3, pp. 164-166, 2016. [6] 
 S. Kadolph, “Natural dyes, a traditional craft experiencing new attention”, Delta Kappa Gamma Bull., vol. 75, no. 1, pp. 14-17, 2008. [7]  Z. Iqbal, L. Liaqat, A. Waheed, and K. Mahmood, “Formulation of natural hair colourants from herbs and dry-fruit hulls from pakistan”, World J. Pharm. Res., vol. 5, no. 1, pp. 1598-1602, 2015. [8] P. Boonsong, N. Laohakunjit, and O. Kerdchoechuen, “Natural pigments from six species of thai plants extracted by water for hair dyeing product application”, J. Clean. Prod., vol. 37, pp. 93-106, 2012.                                       [9] M.R. Yamsani,  Shayeda, and P. Sujatha, “Formulation and evaluation of commonly used natural hair colorants”, Nat. Prod. Radiance, vol. 7, no. 1, pp. 45[10] S. Komboonchoo and T. Bechtold, “Natural dyeing of wool and hair with indigo carmine (C.I. Natural Blue 2), a renewable resource based blue dye”, J. Clean. Prod., vol. 17, no. 16, pp. 1487–1493, 2009. [11] C. Boga, C. Delpivo, B. Ballarin, M. Morigi, S. Galli, G. Micheletti, and S. Tozzi, “Investigation on the dyeing power of some organic natural compounds for a green approach to hair dyeing”, Dyes Pigments, vol. 97, no. 1, pp. 9-18, 2013. [12] K. Farizadeh, M. Montazer, M.E. Yazdanshenas, A. Rashidi, and R.M.A. Malek, “Kinetic studies of adsorption of madder on wool using various models”, J. Appl. Polym. Sci., vol. 80, no. 9, pp. 847-855, 2009. [13] Z. Shahi, M. Khajeh Mehrizi, and M. Hadizadeh, “A review of the natural resources used to hair color and hair care products”, J. Pharm. Sci. Res., vol. 9, no. 7, pp. 1026-1030, 2017. [14] R. Singh and Geetanjali, “Isolation and synthesis of anthraquinones and related compounds of rubia cordifolia”, J. Serb. Chem. Soc, vol. 70, no. 7, pp. 937942, 2005. [15] A.S. Khodke, L.V. Potale, S.M. Patole, and M.C. Damle, “A validated isocratic RP-HPLC method determination for rubiadin in the roots of rubia cordifolialinn”, Int. J. Pharm. Res., vol. 2, no. 4, pp. 2256-2260, 2010. [16] A.C. Dweck, “Natural ingredients for colouring and styling”, Int. J. Cosmet. Sci., vol. 24, no. 5, pp. 287– 302, 2002. [17] S.B. Pooja, M. Sharma, and N.R. Kumar, “Preparation, evaluation and hair growth stimulating activity of herbal hair oil”, J. Chem. Pharm. Res., vol. 1, no. 1, pp. 261-267, 2009. [18] J. Anjali and S. Nardev, “A review on natural additives used in cosmetic preparations”, Wold J. Pharm. Pharm. Sci., vol. 5, no. 6, pp. 630-648, 2016. [19] L.S. Joshi and H.A. Pawar, “Herbal cosmetics and cosmeceuticals: an overview”, Nat. Prod. Chem. Res., vol. 3, no. 2, pp. 1-8, 2015. [20] T. Aburjai and F.M. Natsheh, “Plants used in cosmetics”, Phytother. Res., vol. 17, no. 9, pp. 987– 1000, 2003. [21] V.P. Kapoor, “Herbal cosmetics for skin and hair care”, Nat. Prod. Radiance, vol. 4, no. 4, pp. 306-314, 2005. [22] P. Suvarna, N. Tanuja, P. Deepak, and P. R.P, “Preparation, evaluation and hair dyeing activity of herbal hair oil and comparison with marketed dye”, World J. Pharm. Res., vol. 4‚ no. 8, pp. 1469-1478, 2015. [23] http://www.med-health.net/Almond-Oil-For-Hair.
html. Accessed 01 June, 2018. [24] G. Annadurai, “Design of optimum response surface experiments for adsorption of direct dye on chitosan”, Bioprocess Eng., vol. 23, no. 5, pp. 451–455, 2000. [25] B. Yingngam and A.H. Brantner, “Factorial design of essential oil extraction from fagraea fragrans roxb. Flowers and evaluation of its biological activities for perfumery and cosmetic applications”, Int. J. Cosmet. Sci., vol. 37, no. 3, pp. 272–281, 2015. [26] M. Sadeghi Kiakhani, M. Arami, and K. Gharanjig, “Dye removal from colored-textile wastewater using chitosan-PPI dendrimer hybrid as a biopolymer: Optimization, kinetic, and isotherm studies”, J. Appl. Polym. Sci., vol. 127, no. 4, pp. 2607–2619, 2013. [27] K. Sinha, S. Chowdhury, P.D. Saha, and S. Datta, “Modeling of microwave-assisted extraction of natural dye from seeds of bixa orellana (Annatto) using response surface methodology (RSM) and artificial neural network (ANN)”, Ind. Crop. Prod., vol. 41, pp. 165– 171, 2013. [28] A. Haji, A. Mousavi Shoushtari, F. Mazaherib, and S.E. Tabatabaeyan, “RSM optimized self-cleaning nano-finishing on polyester/wool fabric pretreated with oxygen plasma”, J. Text. Inst., vol. 107, no. 8, pp. 985-994, 2015. [29] R.H. Myers and D.C. Montgomery, Response Surface Methodology: Process and Product Optimization Using Designed Experiments, John Wiley Sons, New York, 2002. [30] M.R. Saeb and H. Garmabi, “Investigation of styreneassisted free-radical grafting of glycidyl methacrylate onto high-density polyethylene using response surface method”, J. Appl. Polym. Sci., vol. 111, no. 3, pp. 1600-1605, 2009. [31] M. Yolmeh and S.M. Jafari, “Applications of response surface methodology in the food industry processes”, Food Bioprocess Tech., vol. 10, no. 3, pp. 413–433, 2017. [32] M.A. Bezerra, R.E. Santelli, E.P. Oliveira, L.S. Villar, and L.A. Escaleira, “Response surface methodology (RSM) as a tool for optimization in analytical chemistry”, Talanta, vol. 76, pp. 965–977, 2008.  [33] A. Krowiak, K. Chojnacka, D. Podstawczyk, A. Dawiec, and K. Pokomeda, “Application of response surface methodology and artificial neural network methods in modelling and optimization of biosorption process”, Bioresource. Technol., vol. 160, pp. 150-160, 2014. [34] S.M. Mortazavi, M. Khajeh Mehrizi, and M. Feiz, “Antimicrobial properties of acrylic fabrics dyed with direct dye and a copper salt”, Text. Res. J., vol. 78, no. 4, pp. 311-319, 2008.